Thanks for this video, I had removed Ram from my Desktop but couldn't install back coz I didn't know it needed that pressing 😂 Now it's up and running after a day of struggling
I successfully upgraded my HP PC from 4G to 16G RAM (from one card to two 8G cards). All went fine and PC starts and runs. Thanks for the concise and easy to follow instructions. I have a question though; the "Device specifications" part of settings shows: Installed RAM 16.0 GB (3.17 GB usable). This is the same as before the upgrade. Is this correct? Or, do I need to do somethinng else?
Hi, if you added new RAM please make sure you have it seated properly in, and they are installed in the correct configuration ( for motherboards with 4 lanes check with the motherboard manufacture). If the memory is our brand, please contact our Tech Support for more assistance: kings.tn/40uVCym
So many questions... someone told me the new ram has to be compatible with the 2 existing sticks, but how do you know... he also said it might need to be added in pairs, but wasn't sure...
Laptop and PC manufacturers often include standard low-capacity memory modules to reduce cost. Two options: Remove and replace these existing smaller capacity modules, or fill unoccupied memory slots. If you need to check what we have available for you please check our site here: kings.tn/49Jv8uZ
I put my new 16 gb ram stick in, and nothing happens. It powers up no problem, but there’s no signal. When I switch it for the old stick it boots up just fine? My garbage can is about to be running at 120 fps pretty quick here.
Please verify that the memory is seated properly and the BIOS is updated. If the memory you are installing is our Kingston memory, please reach out to our Tech Support here: kings.tn/3BXi4XO
I turned it on and everything sounded normal but I got a black screen. I previously had 2 8 gb sticks and I added 2 of the exact same 8 gb sticks and I don’t know what’s going on but I’m thinking faulty sticks. Anyone have ideas?
Faster memory will clock down to run at optimal speeds depending on processor model installed. Check with your motherboard QVL for the latest tested memory parts and supported configurations.
We suggest you contact your motherboard manufacturer for support with your motherboard and it's components we are sure they can assist you. For issues with our memory or Kingston related parts, please send us a message here: kings.tn/407ATRf Thank you.
Hello please visit our site and input your model number to see what memory configurations we have available for your system. You can also chat with our Tech Support which can help you as well: kings.tn/3VyVfQt. Thank you.
For the most part we suggest having equal size and capacity memory upgrades to even out the workflow. However, depending on your system it may be able to run with different capacities. If you would like to find out what we recommend for your system, visit us here: kings.tn/3VE5xOC
Yes you can run on one module however not for Dual Channel, which is where two identical memory modules installed help the bandwidth to increase system performance. For more information you can contact us here: kings.tn/4fNsesT
This all depends on your system limitations. Please visit our website to see what we have available for you as far as memory and SSD upgrades: kings.tn/4hbpZ2G Thank you.
Hey there sorry to hear that. If you are installing Kingston memory and are having issues make sure it is compatible with your system here: kings.tn/4iJiDVJ If you still need assistance with your Kingston memory, please contact our Tech Support in the Support tab on the page linked above. Thank you.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Got my new RAM for a HP Pavilion 590 p0xxx from kingston. Nice tutorial
i am too scared to push it in
@@OFFsider__ bro 😭
You won’t brace it if you go in the right way
whyyy tf did my brain translate this in a dirty way
realest
Your performance issues will improve if you just go for it!
Kingston is best ram manufacturer
Thank you! 🥰
Thanks for this video, I had removed Ram from my Desktop but couldn't install back coz I didn't know it needed that pressing 😂
Now it's up and running after a day of struggling
Simple and useful video
Thank you for your informative videos 😊🤘💐
great stuff man keep it up
I successfully upgraded my HP PC from 4G to 16G RAM (from one card to two 8G cards). All went fine and PC starts and runs. Thanks for the concise and easy to follow instructions. I have a question though; the "Device specifications" part of settings shows: Installed RAM 16.0 GB (3.17 GB usable). This is the same as before the upgrade. Is this correct? Or, do I need to do somethinng else?
Hi, if you added new RAM please make sure you have it seated properly in, and they are installed in the correct configuration ( for motherboards with 4 lanes check with the motherboard manufacture). If the memory is our brand, please contact our Tech Support for more assistance: kings.tn/40uVCym
❤thanks for tuturial nice...
Thanks
Thank you so much
thanks!
very helpful video!
So many questions... someone told me the new ram has to be compatible with the 2 existing sticks, but how do you know... he also said it might need to be added in pairs, but wasn't sure...
Laptop and PC manufacturers often include standard low-capacity memory modules to reduce cost.
Two options: Remove and replace these existing smaller capacity modules, or fill unoccupied memory slots. If you need to check what we have available for you please check our site here: kings.tn/49Jv8uZ
If is doesn't show up the bios,was it ok or not ok.
I put my new 16 gb ram stick in, and nothing happens. It powers up no problem, but there’s no signal. When I switch it for the old stick it boots up just fine? My garbage can is about to be running at 120 fps pretty quick here.
Please verify that the memory is seated properly and the BIOS is updated. If the memory you are installing is our Kingston memory, please reach out to our Tech Support here: kings.tn/3BXi4XO
I turned it on and everything sounded normal but I got a black screen. I previously had 2 8 gb sticks and I added 2 of the exact same 8 gb sticks and I don’t know what’s going on but I’m thinking faulty sticks. Anyone have ideas?
I figured it out. It was very simple. All I had to do was plug into the GPU directly not the motherboard 🤦♂️
Do things i had in pc delete or they are still in pc after i change ram?
No.
RAM has nothing to do with storage
Great video
Want to ask if my motherboard supports 2133mhz memory but what happen if i install a 2400mhz memory?
Faster memory will clock down to run at optimal speeds depending on processor model installed. Check with your motherboard QVL for the latest tested memory parts and supported configurations.
I have a problem now,when i open the locking arm the ram seems to not pop up,and unable to remove
We suggest you contact your motherboard manufacturer for support with your motherboard and it's components we are sure they can assist you. For issues with our memory or Kingston related parts, please send us a message here: kings.tn/407ATRf
Thank you.
hello man my pc supports only 8gb ram can i put 2 8gb modules ?
Hello please visit our site and input your model number to see what memory configurations we have available for your system. You can also chat with our Tech Support which can help you as well: kings.tn/3VyVfQt.
Thank you.
can you install one 16 gb ram but the other one as 8 gb?
For the most part we suggest having equal size and capacity memory upgrades to even out the workflow. However, depending on your system it may be able to run with different capacities. If you would like to find out what we recommend for your system, visit us here: kings.tn/3VE5xOC
@@kingston
Is it possible for my pc to run only with one ram?
@@adamrafiqin2377it usually runs with only ram
@@adamrafiqin2377yes
Yes you can run on one module however not for Dual Channel, which is where two identical memory modules installed help the bandwidth to increase system performance. For more information you can contact us here: kings.tn/4fNsesT
I’m scared I’ll push too hard though and ruin the sticks.
Pc turned on after swapping but mouse and keyboard stay off and moniters don't display anything
Did you fix
This just happened to me too I don’t know what’s wrong
Same
@@bloodhappy2760 I just ended up returning the ram and getting a different brand and it worked.
@@lordfarquaad1701 yes it wasnt in all the way even though it felt like it was I just took it out and line it up better
When I installed the ram the on button is turning orange
If you need assistance with your Kingston memory, please contact our Tech support here: kings.tn/3YGyNHq
Is my pc gonna run if i have 4gb ram and i add 8gb?
This all depends on your system limitations. Please visit our website to see what we have available for you as far as memory and SSD upgrades: kings.tn/4hbpZ2G
Thank you.
My pc did not boot up but i did it correct
Hey there sorry to hear that. If you are installing Kingston memory and are having issues make sure it is compatible with your system here: kings.tn/4iJiDVJ
If you still need assistance with your Kingston memory, please contact our Tech Support in the Support tab on the page linked above. Thank you.
Bruh i forgot to unplug my pc and now its power cycling
👍🏻
How do you upgrade on Mac Mini 2018
Hi George if you are looking for memory upgrades for your system, we got a listing here: kings.tn/43rKTmG
Dee best