I have done sound system upgrades on every vehicle I have ever owned and know the struggles. This was very informative. I decided with my Bronco to just get the upgrades system as I feel too old to be contorting to fit under the seats and dash. haha
I had the B&O system and it was horrible! I gutted it and replaced with an Audison System with an Amp and 12in Sub. Sounds great! But it was very $$. This would have been a great alternative for a lot less! Great video!
And the reason for the fuse it to protect the wire I don't know why they did the fuse like that but please put another on next to the battery cause say for instance it grounds out on the firewall the amp will be protected but everything under the hood will burn Hope it helps. Hey little trick to posi-lock/taps cut the little ends flush where it sticks out then flare it in a circle make it look like a funnel then twist them together. Not trying to belittle you just telling you how I've done it been using them for years also I'm an audio junkie I have a wicked system in my truck
Is this upgrade only for Non-B&O radios or does it not matter? My '23 Wildtrak has the B&O system and I am looking to upgrade the sound (speakers only)
You can definitely upgrade the speakers in the B&O system, many owners have reported significant improvements in sound quality after doing so. Even without adding an amplifier, replacing the stock speakers can enhance clarity and overall audio performance. The only thing I don't think will work is the FORScan adjustments.
@@AutoJourney GREAT JOB!!!!!! I will definitely follow this guide to upgrade to my non B&O speakers. I found an enclosure for an 8” Kicker square sub that will fit in the factory area. I also noticed that your Bronco is not the Lux package. I think it’s important to note that the modifications you do with for scan does not apply to the Lux package. I helped a friend of mine put a sound bar in his Bronco that had Lux package and when I looked at the ForScan graph on Bronco 6G forum it said that the modification excludes Lux package Broncos.
You don't need an amplifier to power these speakers; they perform well with the stock system. However, if you already have the KEY200.4 installed, upgrading your speakers can lead to even better sound quality than just replacing stock speakers in a non-amplified setup, or amplifying the stock speakers.
Hey I followed your install, the sub is getting power but no sound? I’m I missing something? Nevermind the pozzytaps wasn’t getting voltage after that it was working. Thank you
Hey. Thanks for this. Does the standard stock 24 bronco receiver have the amps to make this a good solution with just speakers? As the sound is now stock, it’s just awful
Many people, including us, have found that upgrading the speakers can significantly improve the sound quality, even without adding an amp. However, adding an amp can further enhance the overall audio experience. It really depends on your budget and desired level of sound quality. With car audio, the sky's the limit!
We actually considered including a sound demo, but capturing the true quality of the sound system through a microphone is really challenging. Plus, we wanted to avoid any copyright issues with the music.
One thing your gonna wanna do is the rubber grommet u need to grab the grommet from the inside of the box and wiggle it in a circle while pushing it from the outside it has to go in to the groove in the grommet if it's to hard spit on it then it will slide in the groove I'm not being sexual I just realized how this sounds it could come loose over time otherwise looks good good video
“Wufer”?! Im from the east coast and we say woof (like dog) fer. I’m assuming your from up north near Canada. Not poking fun but my ocd loves trying to figure out accents. Btw thanks for the content, I’m saving the video for later use! 🦾
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
As a special offer for our viewers, enjoy an additional 8% off on ATOTO products! Use promo code "9HSVVUVH" at checkout on Amazon: amzn.to/3XuJv2O
I have done sound system upgrades on every vehicle I have ever owned and know the struggles. This was very informative.
I decided with my Bronco to just get the upgrades system as I feel too old to be contorting to fit under the seats and dash. haha
Thank you for trying ATOTO products! Very professional review! Looking forward to more of your content!
Nice job here. I wasn’t expecting you would be so thorough.
Y’all are awesome
Thank you
Great video extremely detailed and thorough. You provide useful information for 1st DYI. Excellent presentation
Thank you!
I had the B&O system and it was horrible! I gutted it and replaced with an Audison System with an Amp and 12in Sub. Sounds great! But it was very $$. This would have been a great alternative for a lot less! Great video!
Thank you!
Solder seals yaaaa love those things solder shrink and water seal all in one great choice
Nice video. I have the B&O which is disappointing and looking at all options to upgrade the speakers. Not ready to spend $$ for a whole new system.
The gain actually matches the head unit output voltage to the amp cool nails by the way
And the reason for the fuse it to protect the wire I don't know why they did the fuse like that but please put another on next to the battery cause say for instance it grounds out on the firewall the amp will be protected but everything under the hood will burn Hope it helps. Hey little trick to posi-lock/taps cut the little ends flush where it sticks out then flare it in a circle make it look like a funnel then twist them together. Not trying to belittle you just telling you how I've done it been using them for years also I'm an audio junkie I have a wicked system in my truck
Where are you located?!! These guys are trying to take my socks. Selling things I don't need for my 2024 Bronco Sport. I need bass!
Is this upgrade only for Non-B&O radios or does it not matter? My '23 Wildtrak has the B&O system and I am looking to upgrade the sound (speakers only)
You can definitely upgrade the speakers in the B&O system, many owners have reported significant improvements in sound quality after doing so. Even without adding an amplifier, replacing the stock speakers can enhance clarity and overall audio performance. The only thing I don't think will work is the FORScan adjustments.
@@AutoJourney GREAT JOB!!!!!! I will definitely follow this guide to upgrade to my non B&O speakers. I found an enclosure for an 8”
Kicker square sub that will fit in the factory area. I also noticed that your Bronco is not the Lux package. I think it’s important to note that the modifications you do with for scan does not apply to the Lux package. I helped a friend of mine put a sound bar in his Bronco that had Lux package and when I looked at the ForScan graph on Bronco 6G forum it said that the modification excludes Lux package Broncos.
hello would i need to do this if i have the kicker KEY200.4 amp 4 ch.?
You don't need an amplifier to power these speakers; they perform well with the stock system. However, if you already have the KEY200.4 installed, upgrading your speakers can lead to even better sound quality than just replacing stock speakers in a non-amplified setup, or amplifying the stock speakers.
Hey I followed your install, the sub is getting power but no sound? I’m I missing something?
Nevermind the pozzytaps wasn’t getting voltage after that it was working. Thank you
Glad you figured it out!
Hey. Thanks for this. Does the standard stock 24 bronco receiver have the amps to make this a good solution with just speakers? As the sound is now stock, it’s just awful
Many people, including us, have found that upgrading the speakers can significantly improve the sound quality, even without adding an amp. However, adding an amp can further enhance the overall audio experience. It really depends on your budget and desired level of sound quality. With car audio, the sky's the limit!
Are those speakers make with carbon fiber material?
They have a carbon fiber "look".
what about a sound demo
We actually considered including a sound demo, but capturing the true quality of the sound system through a microphone is really challenging. Plus, we wanted to avoid any copyright issues with the music.
@@AutoJourney thank you there is copyright free music in RUclips Library
One thing your gonna wanna do is the rubber grommet u need to grab the grommet from the inside of the box and wiggle it in a circle while pushing it from the outside it has to go in to the groove in the grommet if it's to hard spit on it then it will slide in the groove I'm not being sexual I just realized how this sounds it could come loose over time otherwise looks good good video
“Wufer”?! Im from the east coast and we say woof (like dog) fer. I’m assuming your from up north near Canada.
Not poking fun but my ocd loves trying to figure out accents.
Btw thanks for the content, I’m saving the video for later use! 🦾