Building a cedar strip canoe!
HTML-код
- Опубликовано: 10 апр 2022
- This video covers my cedar strip canoe build, it is a summary of the full build process that is broken down into multiple videos below.
Episode 1 - What and Why - • I’m building a canoe!!...
Episode 2 - Milling the strips - • I’m building a Canoe!!...
Episode 3 - Making the station molds - • I’m building a Canoe! ...
Episode 4 - Making the strongback and attaching the station molds - • I’m building a Canoe! ...
Episode 5 - Planking the hull Part 1 - • I’m building a Canoe! ...
Episode 6 - Part 2 Planking the hull - • I’m building a canoe! ...
Episode 7 - Prepping the hull - • I’m building a canoe! ...
Episode 8 - Fiberglassing the hull - • I’m building a canoe!!...
Episode 9 - Adding gunwales and deck plates - • I’m building a canoe!!...
Episode 10 - Making the seat frames and yoke - • I’m building a canoe! ...
Episode 11 - Finishing trim and applying varnish - • I’m building a canoe! ...
Episode 12 - Weaving and Installing the seats - • I’m building a canoe! ...
Episode 13 - Walk around and maiden voyage - • I’m building a canoe! ...
If you like what we are doing don’t forget to subscribe, turn on notifications for new videos, like, comment and share.
Total Boat Gleam varnish - amzn.to/3NOPkBm
Support through Amazon purchases and product recommendations- Amazon.com/shop/seaman_custom...
"As an Amazon Associate I earn from qualifying purchases." #PaidLink
Instagram - seaman_custom_b...
Facebook - / seamancustombuilds
Website - seamancustombuilds.com
DISCLAIMER - The information provided by Scott and/or Seaman Custom Builds is for general informational purposes only. All information is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information. UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE IS SOLELY AT YOUR OWN RISK.
WE DO NOT WARRANT, ENDORSE, GUARANTEE, OR ASSUME RESPONSIBILITY FOR THE ACCURACY OR RELIABILITY OF ANY INFORMATION OFFERED BY THIRD-PARTY WEBSITES LINKED THROUGH THE SITE OR ANY WEBSITE OR FEATURE LINKED IN ANY BANNER OR OTHER ADVERTISING. WE WILL NOT BE A PARTY TO OR IN ANY WAY BE RESPONSIBLE FOR MONITORING ANY TRANSACTION BETWEEN YOU AND THIRD-PARTY PROVIDERS OF PRODUCTS OR SERVICES.
#woodworking #diy 
Хобби
![KFF Singapore Badminton Open 2024 | Alfian/Ardianto (INA) [7] vs. Liang/Wang (CHN) | QF](http://i.ytimg.com/vi/g0QGafkoT2o/mqdefault.jpg)
Congratulations on a beautiful build of your Cedar Strip Canoe. I love the choice of the name.
That weaving, 😮❤
This was a great step by step. I have an older cedar strip with a couple holes that I am about to renew and feeling daunted by going from simple woodworking to fiberglassing over the hard work. Your statement there really struck home to where my stress is. Nice to know I'm not the only one.
awesome! Thanks for naming it ERMA
Thanks for watching
Let’s see it floating
Beautiful piece of work.
Your talent and attention to detail really shines throughout this build! We loved watching it come together, beautifully done!
Thank you so much, appreciate the kind words
How do I send you an email requesting your opinion on a bigger Cedar Strip Canoe for days on the water
Hay thanks my class teacher gave as project work to make a booklet about canoe thank you for the tips🎉❤😂🎉
I Like the weave. Nice idea!
Thank you and thanks for watching
This is about the best a to z video. Thanks. I'm on my 2nd adk guide boat, white cedar.
Thanks for watching and commenting, I hope your build goes great
That's pretty man, great job
Gorgeous
Thank you and thanks for watching.
WHAT A GUY! Readily admits his mistakes! End RESULT FANTASTIC! Well Done Mate!
Great build.
Thank you!
Way to go Scott!
Thanks Gary!
Super nice job! Looks awesome.
Thank you and thanks for watching!
Super talented!!!! Awesome project
Thank you!
Inspiring it is!! Very nice
Thank you so much!
Nice build!
Thanks and thank you for watching.
Awesome video!You have chemical trails in Tennessee just like here in Oregon...My wife wants me to build her a strip wood canoe...thanks for the tips!
Thank you for watching and commenting. Good luck and enjoy your build!
Nice job on your build - I really like the look of this boat - are there plans available anywhere?
Is a amazing canoe!It was spectacular!!!!!!!!!!!!!
Thanks so much!!
Nice canoe on the water.
Deadly chemtrails in the sky.
hermoso trabajo maestría total
Looked like a lot of knots in the cedar, especially some large ones. Did you cut out bad spots and scarf joint any of the strips to limit waste and eliminate weaks spots in wood, or did you figure the epoxy would take care of it all?
I like this
Thanks!
Cool
👏👏👏👏👏perfect
You make a very nice job! Where can i find the constructing plans of that canoe? Many thanks in advance.
Looks amazing! Any tips&tricks on what to do to don't do? You've mentioned a few don'ts but maybe you've learned about some other stuff now that it is done?
Thank you and thanks for watching. I wish I would have done a better job putting on the bead and cove, made sure the strips were tighter when putting them on the forms, been a little more careful sanding the strips, wipe off epoxy drips and runs before it dries, I think that might be it
@@seamancustombuilds2553 Thank you for your answer! I will take these into account once I start building my first wooden canoe. I am building one from fiberglass at the moment, but I don't like the material
great work!!! nice touch naming her Erma. beautiful name and canoe! how much does it weigh?
Thank you for watching and commenting, it weighs in at 64lbs
Looks fantastic. Do you have a weight on it?
Thanks, it’s 64lbs
How many hours do you think it took to make the canoe ?
Thanks
I had a little over 200 hours in it, thanks for watching
I'm having a problem getting the strips to lay flat on the stations, Any help
Are you stapling or using clamps?
@@seamancustombuilds2553 just clamps, I first tried staples but they would pull out when I bent the strip, was using T50 9/16 staples, do the sprips have to lay flat ?
@@carlhornback5087 Yes, or fairing will be a nightmare and you will thin the core too much in doing so. Use what even tools you need to flatten them. I glue a strip on the station mould back from the edge then install a clamp. I have also used rubber bands to do the same. I cut up old bike tubes for rubber bands.
Can I use Red Elm lumber?
I don’t see why not, I don’t know how the weight would compare but would probably be beautiful
Elm is good for bending. And you can accent with the sapwood.
How do I hire you guys to build my Cedar Strip Canoe?
What is the weight about ?
It weights 64lbs
all that work and you don't bother to use clear cedar?
I am trying to find somebody that could build me a canoe, coffee table. Please let me know if that is something that you would be interested in talking about
Thanks for watching, sorry I’m not taking on any commissioned projects
👍🏽👍🏽👌🏽👌🏽
Thanks for watching
I been wanting start making them. Where can I get the planes
Buulo
I bet you wish you had never used epoxy to fill gaps. You can think Bear mountain boats for that
I would like to pay for one of cash up front much better to buy one hand built than to buy one from Bass Pros shop
Why is the thumbnail the canoe full of water 🤣🤣
It’s not full of water, that’s the shine of the varnish
Haha seaman
Gregkosinski2303 is laughing at you he called you seaman
so many chem trails in the backround
It was a pretty day, thanks for watching
Contrails. No need for conspiracy nonsense here
@@neilphillips3193 Oh, how self righteous of you Neil. Typical useful idiot.