Видео

Bruh, you didn't show off the finished product 🫤🤷🙃

I'm pretty sure the best instruction is on WoodPrix.

That's a sweet build ,especially with your father !

Sweet build

Man, would love to see an updated video of this process with detailed instructions. That last image goes by quick and I can’t quite tell what you’re doing with all the stages on their edges clamped together. Can you explain the entire process? Looks like you square one edge on the table saw with a sled then go to the jointer then back to the saw which I get. Can’t tell what that last step is though.

What a rubbish solution, why not just cut a hole in the feed in plate?

Thanks for sharing, what blade are you running 1/4" it looks like?

Very nice job, thank you for the vid.

Is the back side flat or is there some way to make that side 3d as well?

thank you

Gorgeous craftsmanship. Really impressive!

I appreciate you sharing this. I learned many things in one quick video.

Very nice! I think I'll make some reduced in size as place markers for the Christmas dinner table :) What TPI is the blade you are using? I got the 1/8 bit but am curious about the TPI......

What gauge wire ?

You need to hold them up to the camera at the end.

Universal Engraver big problem I have a 15w Universal Engraver and you’re the only one I found that knows anything about them. Your video mentioned ‘poor support’, I say NO SUPPORT. No phone number, no address! Here’s my problem: I made a clock face that came out fine with a 100 Power/100 Feed using T2 software. I stepped aside for a few hours, came back and put in a new piece of wood and hit the send button. It started out in the 12 o’clock position fine but by the time it got down to the 3-9 o’clock the burn started to fade. By the time it got down to 5-7 o’clock position there was no burn at all. With some test pieces I was able to get some burn with a feed of 20 and a power of 200. Is my module shot? Is it the pc boards? The power supply? I can’t find answers anywhere. Help!

One of those looks like it's the child of a camel and a reindeer. Great video and thanks for the links 🙂

I was thinking about making a different instrument of execution with barrel staves and re-used wire. You know like an electric chair or something. I could make a noose but that's way too easy since it's just rope.

Thats a great build. Its a shame the video resolution/quality was so bad. Would have loved to see it in more detail

Where did you get the bushing? I think I did the exact same thing b

Thank you for talking about safety at the start of your video.

What saw blade do you recommend?

Awesome job ❤

Were you using the same track with both saws? A track becomes mated to a specific saw - not even a specific model, but a specific unit - on first use as the rubber gets trimmed precisely to that saw's tolerances. Definitely shouldn't share tracks between models! Anyway that might explain some of the inaccuracy

Miigwech/Thank you … for sharing..Looking forward to try these in Cedar

thanks, very informative review.

I purchased a piece of crap WEN 4214 drill press and was able to square the table left to right but it was badly out of square front to back. I assumed that the vise I mounted on the table must have thrown it out of square so I removed it and tried again. I discovered that it was the table itself that was out of square so I decided I could shim the vise and level things up. Wrong - the table is DEFORMED and has one low corner. Which is basically impossible to shim and fix. I went back and forth with WEN forth three weeks and they finally suggested I PURCHASE a new table from them that might possibly be square front to back. ...isn't the entire purpose of a drill press to drill holes that are square with your work? This POS fails miserably!

Marking a center line on the jig would help to line it up on the piece to be routed.

Nice 👍

If I like to change net on my old one, What kind of thread do you recommend ?

Just discovered I did the same thing. That little bushing

Wow easy and nice and also no expensive to build thanks

What color is your truck and are you happy with the match? How close is it?

Thank you sir, you saved me $200!

NICE NOW I KNOW WHAT MY LITTLE 12 INCH SAW IS GONNA GET

what weight cloth did you use?

I built our first cedar strip canoe in 1992. It was a 20’ E. M. White design. We have canoed many expeditions with it in many kinds of waters. I built our 17’ canoe 24 years ago and it has been on many adventures. I am now building an 18’ cedar strip canoe for my wife. She loves the 20’ canoe but it weighs 100#. I am building this one as light as I can.

What size hole saw are you using?

Do they have a website?

informative and thank you for showing but next time no music please. It was repetitive and awful and we could barely hear you.

Hey Scott, wonderful series and beautiful result. Well done. Will have to teach you the Canadian stroke when paddling at the rear. Google that stroke my friend!

Man cedar makes a beautiful anything but a boat for sure 💪Erma was shining in the back yard

Awesome looks good brother 💪

This is a rebrand of a Jet model that sells for 600 bucks. Exactly the same machine with different colors and a couple of different aesthetics. Therefore when one buys the Jet, one is pretty much paying double for the brand. Isn’t that crazy 🤪

Very creative

Great video. What is the caulking you used? Thanks

brave putting epoxy on without masks

Good job 😊❤

Thank you for this video! It helped me a lot! 🙌🏼

Belíssimo trabalho! ... Uma verdadeira obra de arte.