Did not think to put a grease fitting and grease that reear diff. I always learn something from you Louie. Thanks, I appreciate the videos buddy. Cheers
Good idea to put some blue lock tight on the seal casing before pressing the seals in, especially when they go in easy...the aluminum case will get warm and they can spin and wear the hole out
I remember when the Honda 90 was the 3 Wheeler was the coolest then my older stepbrother got a 110 now that was really cool! It looked good rain Great. Then my best friend got a big red WOW now that was the best one yet. Thanks for the very well done video!
My father works on submarines he swears by zep spray grease because when the sub comes back up out the water its the only lubricant precaution that stays on the vessel
What size are the rear axle nuts? I want to order a sacrificial socket and weld it to a tube. I cant make out what size big wrench you are using on them?
Can you help me, If i tighten both axle bolts the shaft does not turn freely, only tighten one side, break side or diff? the bearing will not last if I tighten both inner nuts , thx
Ok so it's about time for the snowmobiles... sorry but we love the sled vids. . Are you going to be doing them again? Like pre snow checks etc new builds..?
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Did not think to put a grease fitting and grease that reear diff. I always learn something from you Louie. Thanks, I appreciate the videos buddy. Cheers
Good idea to put some blue lock tight on the seal casing before pressing the seals in, especially when they go in easy...the aluminum case will get warm and they can spin and wear the hole out
Very informative with down to earth explanations. Thank you
I remember when the Honda 90 was the 3 Wheeler was the coolest then my older stepbrother got a 110 now that was really cool! It looked good rain Great. Then my best friend got a big red WOW now that was the best one yet. Thanks for the very well done video!
My father works on submarines he swears by zep spray grease because when the sub comes back up out the water its the only lubricant precaution that stays on the vessel
I cringed so hard watching you beat on that inner bearing race😂😂
Great vid!👍
What size are the rear axle nuts? I want to order a sacrificial socket and weld it to a tube. I cant make out what size big wrench you are using on them?
What size the bearing for the rear
@powermodz where can u find the small o rings at
You have a press. Why don't you use it instead of beating on everything?
Can you help me, If i tighten both axle bolts the shaft does not turn freely, only tighten one side, break side or diff? the bearing will not last if I tighten both inner nuts , thx
Ya pretty sure you don't have something in the right place, hard to say without seeing what you did
Got a new shaft, while tightening big nut to lock the threads were stripped pushing to much, thx for trying to help
Pro tip... Grease your brakes still last longer😏
Ok so it's about time for the snowmobiles... sorry but we love the sled vids. . Are you going to be doing them again? Like pre snow checks etc new builds..?
Be patient bud, that's what he lives for...
@@fergusonhr Well said!
Axle paddle ?
You should wear ear muffs with the air hammer...I said, YOU SHOULD WEAR EARMUFFS WITH THE AIR HAMMER...I crack myself up
Pardon????