Hyundai engineers take note - you made it easy access but wiring is too short makes it hard to leverage the bulb out without pulling heavy on the wires and housing partially blocks the turn signal light, hard to maneuver. Another centimeter or two of wiring and adjusting the housing will make it easier to pop these out and back in again.
Thanks a lot for this video.. I am going to try your suggestion.. Hope the turn signal light notch lines up correctly because it looked like pain in your video!
Also the inner tail lights are not as easy as you make it seem there is no bulb for the LED strip on the outer and inner tail light rings if the strip is blown you would need to replace the entire inner console .
If you touch the bulb it will get oil from your skin on the bulb (or worse if your hands are not super clean) and those things get as hot as the sun and it will shorten the life of the bulb. Headlights are much worse, but all incandescents are prone to this.
Touching the bulb with your bare fingers, not a good idea. It would have been better to feel it with the back of your hand to make sure the bulb is not hot. Your skin there is not as sensitive as in the front.
Followed your instructions and fixed my brake light in less than 5 minutes! THANK YOU SO MUCH
Hyundai engineers take note - you made it easy access but wiring is too short makes it hard to leverage the bulb out without pulling heavy on the wires and housing partially blocks the turn signal light, hard to maneuver. Another centimeter or two of wiring and adjusting the housing will make it easier to pop these out and back in again.
Straight to the point. Thanks!
Helpful video thanks man!
Thanks man love you for this, am a visual learner !
Great video thank you
Great help with your step by step instructions😊
Glad it was helpful!
This was way simpler than I thought.
This helped me so much! Thanks!
Thanks a lot for this video.. I am going to try your suggestion.. Hope the turn signal light notch lines up correctly because it looked like pain in your video!
Hello is this the same as the break light?
Lol, I number my finger trying to pull out the buld instead of pushing down and spinning it😂😳^_^
Does anyone know how come engine clunts out before brake lights
Is that the 2357 or 1157 bulb? I see online they sell "miniature" so I don't know what to get
FYI 2357 is the spec - just changed mine :)
Also the inner tail lights are not as easy as you make it seem there is no bulb for the LED strip on the outer and inner tail light rings if the strip is blown you would need to replace the entire inner console .
If you touch the bulb it will get oil from your skin on the bulb (or worse if your hands are not super clean) and those things get as hot as the sun and it will shorten the life of the bulb. Headlights are much worse, but all incandescents are prone to this.
EZ PZ LMN SQZ.
noticed you had a problem pulling the light...i had same problem..got it out, but now it won't fit back
Same with my 2013 sonata it just too many not needed notches and it literally won't go back in
This is the brake light not the tail light.
Touching the bulb with your bare fingers, not a good idea. It would have been better to feel it with the back of your hand to make sure the bulb is not hot. Your skin there is not as sensitive as in the front.