Used this video to replace the belt on my Hoover VHV 68C vented dryer. It is a tiny bit different at the bottom though. There's 2 screws at the front holding the v-shapped vent at the bottom onto the front drum support and one underneath at the front. Then it's the same process to remove the front drum support. Thanks for the video, perfect 👍🏼
Thanks for video! Just changed the belt on a Candy. Thought it would be easy, but found that the right jockey wheel was stuck and the belt had eaten halfway through it. Made a new one from an empty fishing line roll.
hi,my tumble dryer wont turn over unless you do it by hand i.e with the lid off but the belt seem's tight and with no damage to it,can the motor loose enough power not to turn the drum over? vtc 781nbbc 8kg
+Dj Morgan The problem is likely to be the motor capacitor. We have diagnosis videos like : How to Diagnose Tumble Dryer Motor and Noise Problems: ruclips.net/video/u6614TVugVc/видео.html And a video showing replacing the part on another make: ruclips.net/video/Vd8DcQpk748/видео.html To replace the capacitor mounted on the motor watch another video: ruclips.net/video/oHA0ZRt9AUM/видео.html
Hi , I have the exact model of Hoover dryer and when we switch it on to spin it clicks as if it is about to start spinning but then nothing happens. After about 10 seconds I can detect a faint electrical wire smell seemingly coming out from the top of the dryer. Do you have any idea what it may be ?? Thanks
Hi John, your problem is likely to be the motor capacitor as described in this video: ruclips.net/video/Vd8DcQpk748/видео.html To access and replace you will need to remove the drum as the capacitor is attached to the motor so see this video: ruclips.net/video/oHA0ZRt9AUM/видео.html
Used this video to replace the belt on my Hoover VHV 68C vented dryer. It is a tiny bit different at the bottom though. There's 2 screws at the front holding the v-shapped vent at the bottom onto the front drum support and one underneath at the front. Then it's the same process to remove the front drum support.
Thanks for the video, perfect 👍🏼
Hi HelpfulHappyChappy, thank you for your post and glad the video helped you fix yours and remember to keep watching.
Super useful, changed the belt on my dryer. Cheers folks
Hi Gary, thanks for your comment...great to hear that our video has helped you repair your tumble dryer, well done for repairing it yourself!
Thanks for video! Just changed the belt on a Candy.
Thought it would be easy, but found that the right jockey wheel was stuck and the belt had eaten halfway through it. Made a new one from an empty fishing line roll.
Hi Nakiel, thank you for the post and well done for fixing it.
I have a Aqua Vision.... is this the same process?
hi,my tumble dryer wont turn over unless you do it by hand i.e with the lid off but the belt seem's tight and with no damage to it,can the motor loose enough power not to turn the drum over? vtc 781nbbc 8kg
+Dj Morgan The problem is likely to be the motor capacitor. We have diagnosis videos like : How to Diagnose Tumble Dryer Motor and Noise Problems: ruclips.net/video/u6614TVugVc/видео.html
And a video showing replacing the part on another make: ruclips.net/video/Vd8DcQpk748/видео.html
To replace the capacitor mounted on the motor watch another video:
ruclips.net/video/oHA0ZRt9AUM/видео.html
thankyou i will look into it
Hi , I have the exact model of Hoover dryer and when we switch it on to spin it clicks as if it is about to start spinning but then nothing happens. After about 10 seconds I can detect a faint electrical wire smell seemingly coming out from the top of the dryer. Do you have any idea what it may be ?? Thanks
Hi John, your problem is likely to be the motor capacitor as described in this video: ruclips.net/video/Vd8DcQpk748/видео.html
To access and replace you will need to remove the drum as the capacitor is attached to the motor so see this video:
ruclips.net/video/oHA0ZRt9AUM/видео.html
Thanks for the prompt response, much appreciated !
😊
Would this be the same process for a condenser dryer ??
Hi Rachel, this is a condenser dryer, Hoover and Candy vented dryers are also very similar to replace the belt.
My tumble dryer stopes during working times
+Nagina Ali See some of our Tumble dryer diagnosis videos to identify the problem like: ruclips.net/video/Ph1oCRrvXO4/видео.html
The belt seems super tight to even reach the motor
I didn't know what you think you can get a new window
Lot of stripping to get to a belt .