Service tutorial Ender - 3 V2 the hotend kit replacement
HTML-код
- Опубликовано: 5 окт 2024
- Accessories purchase, Please contact our official email or website, remember to attach your machine type and accessories pictures
Official email:info@creality.com
Official website: www.creality.com
Any technical support in need, Please contact our official service email,remember to attach your printer model、complete orderscreenshot、purchase link 、printer product SN and the issue relevant video or picture .
Official service email:cs@creality.com
Any inquiry of firmware and software,Please download it by creality official website:www.creality.c...
Creality firmware obtaining tutorial: • Video
they fail to mention they hotglued everything down, so you will need to spend hours cutting stuff free
I used my nippers to grab the edge of the glue to just peel it, don’t squeeze hard enough to cut through the edge of the glue just enough to grip it and twist
You just saved me so much time @@davidmeinjueiro8716
@@davidmeinjueiro8716hey, thanks so much. I used my long nose pliers and did exactly what you said, gripped the blob of glue, then twisted and pulled and it came off.
I used a utility knife to cut the glue
What are you using to cut it? A spoon?
Me: *(Gets a new hotend replacement kit)*
YES I can finally replace my hotend and start printing again. Im practically ready to print again!
Creality: Nuh-uh you ain't. You gotta spend 14.35 hrs chewing-- GNAWING-- RIPPING (carefully) at $2 dollar hot glue which I PURPOSELY used to degrade your life until all you want to think about is when its all over, leaving you in such a condition that you will need therapy for years only to BARELY recover from the sheer trauma of even remotely owning a 3d printer.
Me: (In my grave)
*why am i still conscious?*
*I can't feel, see, smell, hear, or breathe, but Im still conscious.*
*What is this cold presence I feel slowly becoming colder and colder?*
*GOD*
*IS*
*THAT*
*YOU*
*?*
Creality: *Welcome to the realm of eternal suffer.*
Remember me, old friend?
You thought you could escape huh? Killing your wife and three children, driving your car into a lake and locking the doors?
Not the best idea you've had.
Speaking of ideas, this realm will force you to think of your worst fear.. indefinitely for all of time.
I present to you.... the
ENDER 3 V2.
This realm will create a simulation, bringing you back to the time you spent, cutting away at the cheap, dollar store grade plastic glue...
and will play it ON REPEAT.
Oh, and if you try to move or escape, the pain only gets worse. You will start feeling a degree of pain you NOR ANYONE EVER has felt before.
Me: w- w- wh- why. WHY ARE YOU DOING THIS? WHY ME!
Creality: Let the fun begin!
Me: no.. NO.. NOOOOOO AHH I CANT RUN. I CANT MOVE. I CANT BREATHE. HELP! HELP ME PLEASE IM BEGGING. WHAT DID I DO?
Creality: Oh if it were only that simple.
Just kidding its really simple.
Me: PLEASE LET IT BE OVER! WHY! WHY IS IT SIMPLE!
Creality: Oh you dont want to know.
Me: PLEASE IM BEGGING!
Creality: Fine!
*Its cause your BLACK...*
Me: im.. wh.. wo. Its cause im what now?
Creality: Yes you heard that right nibba. Your BLACK. PiTcH BlAcK.
Okay fair enough.
AHHH NOT THE PART WHERE I HAD TO REMOVE THE ENTIRE CIRCUIT BOARD JUST TO CUT OUT A 1mm THICC PEICE OF PLASTIC 13 TIMES IN A ROW!
OR THAT TIME I SPENT 120 DOLLARS ON A NEW HOTEND KIT, ONLY TO DROP IT INTO THE DEEPEST PART OF THE MARIANA TRENCH. OR THAT TIME MY ALIEN FRENCH FRIEND OF MINE KILLED MY FOURTH CHILD JUST BECAUSE I ATE HIS CROISSANT.
$#@! le français!
love how they didnt DROWN EVERYTHING IN GLUE!!! for the video :)
Hear me out.
Before pulling the old hot end wire out of the harness tie a string to it and the pull the new one through.
How are you supposed to tell the difference between the two reds at 3:14?
Someone didn’t pay for their intro sound effect
my hotend screws were so tight I had to cut a stripe to use normal flathead screwdrivers instead of allen key screwdrivers. I wanted to remove it so I could hook up a pen and use my 3d printer as a 2d plotter
Watched this to fix my older ender 3, got further by winging it
I got heating failed printer halted
love how they gloss over the plastic clips at the back that stop you screwing it on
My new parts came without the blue and yellow wires. What do I do?
I am doing it myself and I think you need to use the ones that come with the fan already
why do these things always have to be so fast
You can slow videos playback in the settings on the corner of the screen when you pause
@@davidmeinjueiro8716 I know but by default just why add that extra step
My printer won't boot up...
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
"Sprinkler head"? Is this a term I don't know?
Chinese translation
@@phatphlap So in Mandarin, the part is known as a sprinkler? Kewl.