Multiple Effect Evaporators - Introduction

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024
  • Overview of a multiple effect evaporators

Комментарии • 39

  • @eugeneoconnor5754
    @eugeneoconnor5754 8 лет назад +16

    Very helpful. Some lecturers make no attempt to break things down like this to basics

  • @tomasbaquer4034
    @tomasbaquer4034 3 года назад +2

    Great explanation! Greetings from Argentina

  • @wind0wel
    @wind0wel 6 лет назад +14

    Great Explanation for Forward-Feed Multiple Evaporator, but you should have explained how Backward-feed, Parallel-feed and Mixed-feed works.

  • @robertkeeney4147
    @robertkeeney4147 6 лет назад +7

    Well done and appreciated.

  • @dawnlightening
    @dawnlightening 7 лет назад +1

    It took a couple of minutes for me grasp the concept. But then the explanation became very clear. The diagram isn't very clear - for each stage, the incoming liquid pipe and the outgoing liquid pipe appear to be connected. But for the explanation to make sense, these two pipes should be unconnected.

  • @osmangenc8649
    @osmangenc8649 3 года назад +3

    Türk kardeşlerim sizler için ayrıyeten bir türkçe çeviri yaptım ve alt kısma yazdım. umarım faydasını görürsünüz ( videodaki tüm kelimeler sırasıyla yazılıp çevrilmiştir :) )
    Öncelikle üçlü etkili evaporatörün bu animasyonuna bakalım, içeri giren ve ilk etkiye giren buhar ve kondansat yaprakları ısıtma bölümünün altından ham meyve suyu alttan giriyor ve bu tüplerde ısındıkça yükseliyor. sıvının bir kısmının buhara dönüştüğü ve diğer konsantre sıvının daha sonra buhardan aşağı hareket ettiği üst kısım, ilk etkiyi terk eder ve bu buharları atmosfere boşaltmak yerine, ısıtma ortamı, içindeki ısıtma ortamının dikkatini çektiğinden, ikinci etkiye girer. ilk etki buhardı ve şimdi ikinci etki için ısıtma ortamı, ilk etkiden gelen buhardır, bu buharlar daha sonra ısıtma bölümünde yoğunlaşacak ve şimdi yoğuşma olarak bırakacaklar, şimdi ilk etkiden gelen yoğunlaştırılmış akış daha sonra beslenir. ikinci etki ısıtma bölümünün alt kısmındadır ve ısıtma bölümünden tekrar yukarı yükselir, sıvı akımından daha fazla buhar çıkacaktır ve bunlar İkinci etkiden gelen buharlar daha sonra ısıyı boşaltacakları ısıtma ortamı olarak üçüncü etkiye geçirilir ve kondansat, ısıtma bölümünün alt kısmında ikinci etkiden gelen konsantre sıvı daha sonra üçüncü etkiye beslenir. ısıtma bölümünün altında ve yine üstte daha fazla buhar çıkacak ve daha sonra atmosfere atılacak ve üçüncü etkiden sonra konsantre ürün akışı sağ taraftan ayrılacak, böylece üçlü buharlaştırıcı buhar içeri girip sadece girer. ilk etki ve daha sonra ikinci ve üçüncü etki için ısıtma, önceki etkilerden boşaltılan buharlar tarafından yapılır, tabii ki bu odacıkların içindeki vakum, bu etkideki sıvı akımlarının uygun şekilde kaynayabilmesi için uygun seviyelerde tutulacaktır ve buharları boşaltın, bu etkilerin her birinde kaynama sıcaklığının farklı olduğuna ve farklı kullanımlarla kaynama sıcaklığının korunduğuna dikkat edin. bu etkilerin her birinde vakum seviyeleri

  • @ancizarrendon7491
    @ancizarrendon7491 7 лет назад +1

    Mr Paul Singh, our innovation, heat exchanger allways high level efficiency, never stop for cleaning (upon some conditions).

  • @shahinav1157
    @shahinav1157 3 года назад +1

    Very helpful! God bless you!!!

  • @arkhaana7159
    @arkhaana7159 3 года назад +1

    You help me a lot sir, thank you so much

  • @theshynee6137
    @theshynee6137 6 месяцев назад +1

    tomorrow is mu unit operation in food engineering exam and i am here boss

  • @avni1402
    @avni1402 8 лет назад +2

    Hello Sir, do you have any animation videos on multistage flash distillation please. I'm doing my dissertation on desalination and I'm unable to understand the working principle of MSF (Regards from Mauritius)

  • @joyjitchakraborty2604
    @joyjitchakraborty2604 6 лет назад +1

    Great Explanation ZLD

  • @lascuolapertutti9401
    @lascuolapertutti9401 2 года назад +1

    OTTIMO. GRAZIE.

  • @bhushanmeshram7240
    @bhushanmeshram7240 4 года назад +1

    Helpful Explanation

  • @craigjasin8125
    @craigjasin8125 8 лет назад +2

    Great explanation

  • @rohitnautiyal881
    @rohitnautiyal881 6 лет назад +1

    Very nicely explained,

  • @Taiko1122
    @Taiko1122 7 лет назад +2

    Hi, may I know the vapour (raw juice) that comes from first effect to second effect, and acts as heating medium. Then it will leave as condensate. Will the feed (raw juice) be wasted? Thank you!

    • @mahrebelob
      @mahrebelob 6 лет назад

      I guess the vapour is water, and normally the condensate is used as a recicle to the process...

    • @meruraghavani4616
      @meruraghavani4616 6 лет назад

      No. vapour in first effect convert into liquid( generally water as for most of solutions which is desirable to concentrate in evaporator have water as solvent) after condensation and it may used for steam generation which will use in first effect for economical aspect.

  • @somnathshinde2763
    @somnathshinde2763 4 года назад +1

    Best explain

  • @shubhamdubey3585
    @shubhamdubey3585 4 года назад +1

    Nice video sir

  • @dipanchatterjee3334
    @dipanchatterjee3334 8 лет назад +1

    great explanation............

  • @prashantsingh402
    @prashantsingh402 7 лет назад +2

    sir I want waste water evaporator system for zld please send technologies

  • @venkatrao5827
    @venkatrao5827 3 года назад +1

    nice

  • @mayanksharma877
    @mayanksharma877 6 лет назад +1

    sir as usual juice will pass from different evaporator, the concentration and viscosity will be increased. my question is wheather we have to consider viscosity or not???

    • @RPaulSingh
      @RPaulSingh  6 лет назад +1

      No, in these examples we do not consider viscosity separately in conducting mass and energy balances. The influence of viscosity on flow rate is embedded in the mass flow rate terms that are used in calculations.

  • @AliAhmad-bo7zz
    @AliAhmad-bo7zz 7 лет назад +1

    boiling occurs in it or not??

    • @RPaulSingh
      @RPaulSingh  7 лет назад +2

      Yes, boiling occurs but at low temperature due to low pressure in the vessel. Boiling results in the formation of vapors.

  • @AliReza-eq3cv
    @AliReza-eq3cv 6 лет назад +1

    very helpful...can i download it?!

  • @kisud
    @kisud 7 лет назад +1

    thankyou Guru ...

  • @kothakapumahendarreddy5678
    @kothakapumahendarreddy5678 6 лет назад +1

    Dear sir please explain about evaporator

  • @rahmahanifah341
    @rahmahanifah341 8 лет назад

    should've written multiple

    • @RPaulSingh
      @RPaulSingh  8 лет назад +1

      Thank you for the correction!

  • @sakharambotre4230
    @sakharambotre4230 6 лет назад

    S.D.Botre

    • @sakharambotre4230
      @sakharambotre4230 6 лет назад

      its equivalent to pyrogen fee water distillation multi column unit .excellent, consumes lesser steam with maximum through put.

    • @sakharambotre4230
      @sakharambotre4230 6 лет назад

      what i believe ,there will be hardly wasteage of feed material.