Это видео недоступно.
Сожалеем об этом.
SDG #03 Metcal MX-DS1 Desoldering Gun
HTML-код
- Опубликовано: 21 фев 2014
- Follow up to the MX-5251 unboxing. First tests with the MX-DS1 compressed air desoldering gun for reworking through hole PCBs after receiving delivery of the 'silent' compressor.
Metcal Desoldering Station: www.okinternati... #ElectronicsCreators
One tip. When you hold the soldering iron when melting, gently stir and then press the vacuum trigger. Then you will achieve the desired result for the full release of the pin.
In dave's video it seems like he had more luck wiggling the pin while the vacuum is on, to prevent the pin sticking to the edge: Ft50m8UU5WQ 21:37
Like you said wiggle it while it works, that's the reason for the wiggle. He should check out ruclips.net/channel/UCU9SoQxJewrWb_3GxeteQPA Mr. Carlson's Lab for the most meticulous man on youtube and watch him do it parts almost fall out by themselves.
Need details of your compressor, please.
Can you do another review of the same MX-DS1 desoldering gun? I'd like to campare its current performance to that of the first time tests. Isn't logenvity the most important factor to determine the quality of a product? I hope you'll find some time to do a video on this one.
I may include it in a future video but it's still behaving exactly the same. It's a very good piece of kit and I've not found any weak parts all this time later
About your use of the screwdriver... the first time you pry up a DIP device and pull out a via, you'll give up the screwdriver.
Hi , So you have to buy a compressor to use the Gun ? does Metcal sell it ? , i have a MX500 station , could it be compatible ?
Thx !
yes you need a compressor and it works with the mx500
What's the price on the gun please i have the same mx as You i think the 5000
I see a lot of used Metcal STDS-DS1 desoldering pistols on sale via eBay. What is the difference between the MX-DS1 and the STDS-DS1? Searching for information on the STDS-DS1 turns up little or nothing. I am guessing the MX-DS1 has some type of disposable filter keeping junk from getting to the air compressor.
The link takes you to a page where you choose all options and features.
The quick answer: what does the MX-UK5 cost?
What is the most common desoldering tip (model number) that would be used for majority of the work
Most component legs are around 0.4 to 0.7mm in diameter, so that kind of size should do.
Can you suggest the slient compasser?
Thanks alot
Any of the oil-free compressors seem to work well.
How does the desoldering gun perform after all these years? Is it still as good?
It's perfect, never had any issues at all
@@sdgelectronics Thank you!
Metcal is the industry standard, But Hakko 474 is considered the best throughole desoldering in the industry.
Years ago I was working for some of the Top electronics companies Hakko 474 never missing, I know 474 is and old model.
Best Regards.
just be carefully I have pulled barrels out tha way ....
you dont use it properly... you have to wiggle the pins 2sec and press the trigger and continue to wiggle...look at pace desoldering technics