How to install subs in a m35/m45 y50 easy guide
HTML-код
- Опубликовано: 25 мар 2018
- Here's how I installed subs in my 2006 m35x, I didint see anything online. So after doing some search I wound the factory amps wire for read speakers and the amps remote wire. You will need a rca line out converter, and an amp install kit.
- Кино
Your ground should not be fused
You should not run vocals through the sub . If your sub is beating up your factory miss and highs you may need another amp for them also, or tune your sub amp to the speaker specs and drop your gain a bit it’ll even out . I’d get another amp for the doors and dash speakers.
It’s terrible for your subwoofers to play anything but lows/midrange it reduces the life of the subwoofer and it doesn’t even play highs very well
Plug & Play harness adapters are now available for the M35, M37, and many more Infiniti and Nissan cars.
It messes with the A/C though? Have to splice in to the harness and keep it plugged into factor radio
@@Spinnymachine No, the harness adapters don't interfere with anything like that at all. No cutting or splicing wires either. Everything is plug & play.
@@owcupgrades6272where can I find them? I have a 2007 Infiniti m35x
@owcupgrades6272 where do I go to buy one about to install a system help me
@@knightwalker2838 Sure, I can help you out. What car do you have?
Is it the same for g35 03 sedan blue wire amp ? Can I connected to the Browne cable too ?
Great video but u don't show in detail where the wires go where does the race Jack's run to from the amp I was told to hook them straight to the back sub
Where did you get you schematics from?
Why would you want vocals through sub😂
My m45 amp is on the right ia it the same steps??
i see two brown cables im.guessing the one closest to you is the one to run
How you let yo backseat down like that
How do u go threw on the speaker
how did you run the rca cables to the amp?
With a line-out converter (LOC).
Is that BCM module of the car at 1.44 where many connectors are attached???
No
Can u make a video of how u ran the cables to the amp...and how hard the system hits..thank you
y50 raymond sure thing ill have a video in the next 2 weeks cause cars getting painted as of right now.
Abdulmanan Chaudhary thank you bro really appreciate it..I'm new to the audio industry so I get confused
Yeah no problem, i know theres barley anything out about doing audio install on these cars, just happy to be able to help anyone else
Abdulmanan Chaudhary I have a question...i did everything u did in this video but everytime i put the sub in the trunk it gives out static is that the reason u put your subs in the back seats ?
y50 raymond no i had just put it in the back seat because i needed to tear apart the trunk, i had put it all back in the trunk and it worked great, in about 1~2 weeks ill be making a more detailed video of how to wire and set up subs in the y50, but to answer your question it shouldn't be giving you static, make sure no wires are loose or exposed and making contact with other wire, also cheack your ground isn't loose
Where do you plug rca cables in 2006-2007 m35? I don't have rca plug ins anywhere. Please help
you need a line out converter
Hey did the same thing to my 2006 m35x it work but my battery and brake light came on. Why is that
Alternator going bad or not strong enough
How did u run your power cable??
bksbullynyc2 i ran it threw the cabin air filter and under my glove, will be wireing i a bit better and release a video of that
Does this apply to the m37 as well??
You might want to check out the OWC harness kits for the M37.
how did you run the rca cables to the amp????
With a line-out converter (LOC).
What do the rca cables plug into after the amp on the subs? I ran the sub cables for positive and negative like you said and then put it To the subs.
Rca jack
Use a line out converter. It turns speaker wires to rca jacks
If there's anyone still questioning this, tap into sub speaker wire without a line out converter. There's not enough bass to tap into the other speakers because they’ve already been filtered through the Bose system and don’t put a fuse on your ground 😂
How do u tape in to the speaker
Bro why the fuck is your ground wire have a inline fuse on it? Oh fuck no you did a horrible job yes u found the wires but dam bro I guess you tried