can I just pay you to do all this for me.....I think this surpasses my limited mechanic abilities... Great video though, watched the whole thing trying to convince myself that I could do it
At 8:54 you fast-forward through the removal of a piece which you don't talk about and pull out another tool to cut it out, what is this and can we get any detail on that?
Great video on the radio installation on the Dodge dart. I looked at the dash kit on your RUclips video and the one in your link doesn't come with instructions like the video..where can I get one for a 2016 Dodge dart with the basic radio? Thank you.
The dart is a fun car. I did an Alpine single din with a 4 channel Alpine MRV-F300 and a JL 12 inch powered microsub. With Type R components in the front and Type S coax in the rear. I used the Metra side mounts and pocket but didn't use the bezel. It looked a bit off and the single din only required me to shave the factory bezel a bit. I made a panel to fit flush behind the factory bezel and it turned out nice. Although using the Metra bezel would have been much easier. My customer was pleased and really thats what's its all about. Nice video guys!
Five Star Car Stereo have you guys gotten into backup camera integration to existing factory screens? I just hooked up a 2015 Jeep Grand Cherokee and I was able to tie into the factory RSE inputs on the back of the radio. After that the dealership had to flash it. I'm trying to see if the same thing is possible in a 2017 Ford F150?
Can you install without the pac kit? I dont care if the radio steering wheel controls for the radio dont work but will the two buttons on the steering wheel work for the instrument cluster menu though?
Nice job. I have a 2013 Dodge Dart that has a touch screen that is no longer working. I want to get it repaired but the dealer wants a lot of cash. Any thoughts what I can do?
Dodge made it more difficult for you guys on this one. You killed it as usual 👍🏻. I have a PAC RC5, can I program my steering wheel buttons to do multiple things with that module? Great video Guys!
On the aux wires down by the floor board, do we use all the wires? Or just red brown and black? What do we do with the others if we don’t use them? And will the aux in the center console still work?
So I have a 2014 Dart with the knob radio. I hve a Kenwood Double Din 7.x'" inch screen. But it really just a face plate its only like 2.5-3.5" inches deep. No dvd or crap. Will i stll have to take out that bracket?
How do you know how many volts your accessory wire is putting out or what wire is the accessory wire. Connected everything up and radio doesn’t turn on.
I like the clean install you guys always do an awesome job and thats great motivation for me who is an installer my self stay awesome and another job well done
Hey guys thanks for this video, I learned a lot with it. One thing I learned is that I may have to bring my Dark to a professional installer like yourselves because it is way more complected than what I thought. If I replace my original single Din but double DIN stereo with the original Dart 8.4 stereo, would I have to still make all those customization to fit the screen? Thanks and take care!
The 8.4 system is different, the dash bezel is the same, however on the Dart the screen is just a screen not like the newer challengers/chargers where the tuner is attached to the back of the screen. The actual tuner, antenna connections are located up behind the glove box. Its generally not going to be worth the effort to do such a conversion unless you got all the wiring, and parts for practically nothing.
Hey guys the wielding on the pipe actually came with it. Now I have a hole on the left side where wielding was. Should I worry. As of right now I just put some tape over it.
you're going to need the wiring harness that comes with the toucscreen, module and the screen itself. so if you could find all three you should be abe to do the swap. but i insist that you buy the Re2 factory stereo instead of the newer Rb5 because you'd have to buy so much more accessories.
Question: any way to retain the factory hands-free mic? I only ask because the one that came with the radio was installed and only occasionally hears me when I'm making a call. Weird thing is that when I use the "ok google" hotword, it works; however, it doesn't hear any commands afterward. I also have no idea if these issues are actually a defective mic or head-unit.
thatboyd86 I will add it to the list. Most of the Camry's we do, we remove that radio. They just don't sound that good in the first place adding amps does not help.
I live in Spring Glen New York and I wanted to get that system that you guys put in the Dodge Dart for my Dodge Dart how much would it cost for me to get you guys to send me the same system and everything for my car
Wait so you guys used the same wire in the car to hook up the new radio. The two wires don’t fix on the radio screen it has three wires in the back how did you do it?
i love a little bit of rap and 70 s rock music , bee gees,cool and the gang, earth wind and fire etc. I wish i was living in Florida ,i would of love to do business with you. great video with the prius ,
Great tut!! However i have An unusual problem. Installed Pioneer avh 120bt. Now do not have steering wheel controls. Tried to reset to factory default. No success. Unit scrambles my radio. Unplugged everything. Still will not reset. Any ideas? Bad unit maybe?
one other question when I installed the aftermarket radio I used an antenna adapter the 40eu-10 but since I want to go back to stock, will I need to remove the antenna adapter? to plug in the stereo ? or can I used that same one?
im in the market of getting another car now. i was looking at the dodge dart. can someone who owns one tell me how the car is. this would be my 1st Dodge that i might purchase.
slice0flife is the odometer the only thing that blinks after you replace the radio (Just the mileage)? Or does it mess up other stuff in the car as well?
I just bought a Dart that obviously had some aftermarket sound system installed at some point. All the original equipment has been put back into its place but nothing got wired up. All speaker wires are cut up and the radio was disconnected. I put everything back to where its supposed to be and wired it all back up but I'm not getting any sound out of the system! Has anyone come across this or can someone lead me into a direction as to what I might have missed? Thanks in advance!
Do you guys have someone I can pay to do this to my car cause the person that did mine didn’t connect the cords right and the screen drained my car battery!!!
Please help, can’t I just buy the entire bezel on the limited Dodge Dart? Meaning, buy the bezel that already has the touch screen, and just swap it with the stock radio/bezel? Please help!!!
nice, but how about to change the standard analog panel to a digital 7Inch speedometer (Is it possible to do this?). So I bought 2014 Dodge Dart sxt in the USA with analog dashes, and I want to buy 7-inch digital dashes on eBay or Amazon, and change it ) P.s I'm live in Ukraine
They always told me that it couldn’t be done! You guys just showed me it’s possible! Totally getting this done in my dart!
Same here!!!
Fr my dodge dealership told me they couldn’t take the thing off to replace the broken screen 😂
You can change these head units but not the 8inch touch screen 🤣🤣🤣 those u can not chnage
Did you ever get this done?
can I just pay you to do all this for me.....I think this surpasses my limited mechanic abilities... Great video though, watched the whole thing trying to convince myself that I could do it
oh holy crap its the first dart video I have seen today that was actually useful (1 day old dart owner)
osgeld same man just got mine yesterday
@@rabidmarksman3912 Awesome, Just got mine 2 days ago
Dang youre pretty young to be driving
At 8:54 you fast-forward through the removal of a piece which you don't talk about and pull out another tool to cut it out, what is this and can we get any detail on that?
Always love the radio and equipment installs!
Just put a radio in my dart. Helped a lot!
That was an awesome tear down, way more complicated than I would have thought.
+Zachary Binks thank you
Great video on the radio installation on the Dodge dart. I looked at the dash kit on your RUclips video and the one in your link doesn't come with instructions like the video..where can I get one for a 2016 Dodge dart with the basic radio? Thank you.
What are the chances of seeing one where you replace the 8.4 uConnect please and thank you? They seem to be in almost every Dodge and are junk..
The dart is a fun car. I did an Alpine single din with a 4 channel Alpine MRV-F300 and a JL 12 inch powered microsub. With Type R components in the front and Type S coax in the rear. I used the Metra side mounts and pocket but didn't use the bezel. It looked a bit off and the single din only required me to shave the factory bezel a bit. I made a panel to fit flush behind the factory bezel and it turned out nice. Although using the Metra bezel would have been much easier. My customer was pleased and really thats what's its all about. Nice video guys!
+sam the installer happy customers are a good thing, thank you
Five Star Car Stereo have you guys gotten into backup camera integration to existing factory screens? I just hooked up a 2015 Jeep Grand Cherokee and I was able to tie into the factory RSE inputs on the back of the radio. After that the dealership had to flash it. I'm trying to see if the same thing is possible in a 2017 Ford F150?
Always love the simple radio installs!
The sarcasm lmaoo
Did you guys use the factory mic with the aftermarket stereo?
You guys cover everything!! However, can you tell me why my odometer now flashes? I think this is a common problem.
I would also like an answer to this mine does this also 6months after warranty expired of course
You need a proxy alignment. You can do it with alphaOBD, or can have a dealership do it.
What pioneer radio is that I want it for my dart
Yeah can I get a link?
Can you install without the pac kit? I dont care if the radio steering wheel controls for the radio dont work but will the two buttons on the steering wheel work for the instrument cluster menu though?
I'm watching the video you have on the 2016 Dodge dart where did you get the wiring harness plug into the new radio or what did you do
Nice job. I have a 2013 Dodge Dart that has a touch screen that is no longer working. I want to get it repaired but the dealer wants a lot of cash. Any thoughts what I can do?
another great video! keep these radio installs coming.
+Anthony B thanks
what did you guys do with the reverse output (green wire)
Dodge made it more difficult for you guys on this one. You killed it as usual 👍🏻. I have a PAC RC5, can I program my steering wheel buttons to do multiple things with that module? Great video Guys!
+Tim datoolman yes you can
On the aux wires down by the floor board, do we use all the wires? Or just red brown and black? What do we do with the others if we don’t use them? And will the aux in the center console still work?
Did you find out?
Thanks so much! Just did mine my dual branded stereo was short so i didnt have to remove the metal bracket
This video saved my life getting my new deck in! Thank you!
All those videos you guys make are very helpful for installations thanks
Will this work the same as the UConn 8.4 screen
So I have a 2014 Dart with the knob radio. I hve a Kenwood Double Din 7.x'" inch screen. But it really just a face plate its only like 2.5-3.5" inches deep. No dvd or crap. Will i stll have to take out that bracket?
Did you ever find out?
Can you make a video on how to put a back up camera on a 2015 Dodge dart? Back up camera from Auto Vox.
How do you know how many volts your accessory wire is putting out or what wire is the accessory wire. Connected everything up and radio doesn’t turn on.
I like the clean install you guys always do an awesome job and thats great motivation for me who is an installer my self stay awesome and another job well done
Also how do you wire the aux, you never showed how to hook it up to the radio
i’m wanting to change mine, what size radio fits?
Hey guys thanks for this video, I learned a lot with it. One thing I learned is that I may have to bring my Dark to a professional installer like yourselves because it is way more complected than what I thought. If I replace my original single Din but double DIN stereo with the original Dart 8.4 stereo, would I have to still make all those customization to fit the screen? Thanks and take care!
+Marvin Menjivar it is not that bad, really. You would have to talk to a Dodge Tech.
The 8.4 system is different, the dash bezel is the same, however on the Dart the screen is just a screen not like the newer challengers/chargers where the tuner is attached to the back of the screen. The actual tuner, antenna connections are located up behind the glove box. Its generally not going to be worth the effort to do such a conversion unless you got all the wiring, and parts for practically nothing.
I wanted to do this thing to my dodge dart 2013 will you give a number or something
Jelin Joseph I’m having issues with it too, do you have the UConnect system and heated seats?
So the long reverse green wire connects to the purple white wire on the pioneer harness?
Micro bypass and antenna adapter links are out of date, please let me know what I should use instead, I’m trying to do this to my dart rn lol
Awesome video. Really great job but this makes me think maybe I should just take it to a shop to do.
Hey guys the wielding on the pipe actually came with it. Now I have a hole on the left side where wielding was. Should I worry. As of right now I just put some tape over it.
Can you upgrade a dodge dart’s basic stereo(like the one your video) to the Dodge Dart Touch Screen stereo ?
you're going to need the wiring harness that comes with the toucscreen, module and the screen itself. so if you could find all three you should be abe to do the swap. but i insist that you buy the Re2 factory stereo instead of the newer Rb5 because you'd have to buy so much more accessories.
What's the price tag for parts n labor?
Question: any way to retain the factory hands-free mic?
I only ask because the one that came with the radio was installed and only occasionally hears me when I'm making a call. Weird thing is that when I use the "ok google" hotword, it works; however, it doesn't hear any commands afterward. I also have no idea if these issues are actually a defective mic or head-unit.
Do you guys have a cobalt video of how too install an avh x3800bhs??
Adrian Segovia no sorry, we are working on building up the radio install Library of videos. I will add it to the list
thanks. ill wait for it. then ill share it on fb.
Where did you hook the aux wires up to?
Do we use both wires for the antenna?
I would like for you to do a 2014 Camry sound systeam to a stock radio with gps
thatboyd86 I will add it to the list. Most of the Camry's we do, we remove that radio. They just don't sound that good in the first place adding amps does not help.
What pioneer radio did you use?
Hi I know it’s been a few years since you made this. But what size the pioneer radio you put in?!
in this Dart project does it also use the already installed microphone?
Jason Liparulo no you have to use the one that comes with the radio
I live in Spring Glen New York and I wanted to get that system that you guys put in the Dodge Dart for my Dodge Dart how much would it cost for me to get you guys to send me the same system and everything for my car
Does the wiring harness box work with a boss audio single din unit?
Wait so you guys used the same wire in the car to hook up the new radio. The two wires don’t fix on the radio screen it has three wires in the back how did you do it?
I have a 1999 3gen 4runner limited , what after market speakers can i used to replace all my factory speakers?
youvids9820 what type of music do you listen to? It is a 6.5 up front and a 5.25 in the rear
i love a little bit of rap and 70 s rock music , bee gees,cool and the gang, earth wind and fire etc. I wish i was living in Florida ,i would of love to do business with you. great video with the prius ,
Does the version of this radio with the DVD player work with the bezzle on!
Hey what options do you guys have for the 13 journey wife has the 4 inch info screen
Anthony Johnson right now that is going to be the Metra 99-6520b kit
Five Star Car Stereo thanks looks like I will be able to use the 4 inch screen for a rearview monitor or for the backup cam is that right?
Great tut!! However i have
An unusual problem. Installed
Pioneer avh 120bt. Now do not have steering wheel controls. Tried to reset to factory default. No success.
Unit scrambles my radio.
Unplugged everything. Still will not reset. Any ideas? Bad unit maybe?
i know its a old video but what radio are you using?
What do you set the dial to when your aftermarket radio is not on the list?
Hey where do u buy the screen for this?
My radio has power when it wants to any info why? Fuses are good it just has no power sometimes and comes on when it wants to
Would this work for a dart that had the uconnect system and heated seats?
Is there a factory amp for the door speakers?
Can I please get the name of the after market radio you installed?
+Quinton Lee it was a pioneer 4200
Do these have factory amp?
Would like to see a video of a '15 chrysler 200!! Probably similar to this video
Do u still have to cut the dash for a single din?
how much would something like this cost ? i live in california ? i also have 2016 Dart
I installed a radio about year ago i want to go back to factory stereo is it possible to do this? im aware i need a new bezel
thank you
Alvaro Chavez yes you can but the factory back. It should plug in and add new bezel
Five Star Car Stereo thank you. you guys are the best!
one other question when I installed the aftermarket radio I used an antenna adapter the 40eu-10 but since I want to go back to stock, will I need to remove the antenna adapter? to plug in the stereo ? or can I used that same one?
How about a 2016 Ram 1500 install?
+MrJMagoo I thought we had done one, I guess we have just kind of done thing around the radio. Will do one for sure.
Thanks very much
im in the market of getting another car now. i was looking at the dodge dart. can someone who owns one tell me how the car is. this would be my 1st Dodge that i might purchase.
Do you have to disconnect the battery?
Do you guys suggest any other radio, would a 6.2 in display fit or does it need to be 7 in?
What year is this dart?
What radio did y’all use
What kind of pioneer radio is it
Enjoyed the video guys. Sure hope you can get a Honda Accord in there soon to video.
+Brian Miles still waiting for a better dash kit.
Can y'all do a radio replacement for a 2015 Chrysler 200 please!!!
Jason Vidal when we get one in sure
Hopefully, I'll be bringing in my 2015 Chrysler 200 in a moth or less.
I have a problem with my odometer blinking after installing my aftermarket stereo. Is there anything i can do to fix that?
slice0flife is the odometer the only thing that blinks after you replace the radio (Just the mileage)? Or does it mess up other stuff in the car as well?
Yeah only the milage. All you have to do is go to the dealer and have them flash it to stop the blinking. It takes them literally 2 minutes to fix it.
Does this work for dodge dart se 2014?
What about the 8.4 ucconect dart
Is it possible to go back to the stock head unit? My Pioneer unit (After 3 years) is bricked
i would like to see you guys do a 2013 chrysler 200
Anyone got suggestions for 2013 Dodge Dart SE install? What radio would y’all recommend.
Where can I find a ACC Wire on this car?
Where can I find the wiring harness
I just bought a Dart that obviously had some aftermarket sound system installed at some point. All the original equipment has been put back into its place but nothing got wired up. All speaker wires are cut up and the radio was disconnected. I put everything back to where its supposed to be and wired it all back up but I'm not getting any sound out of the system! Has anyone come across this or can someone lead me into a direction as to what I might have missed? Thanks in advance!
What happened with the dart that sounds terrible 😭
Será q me puedan ayudar en español por favor 🙏🏻 la pregunta sería si el arnes servirá para un radio de 10.1” chino pls
What size stereo??
Thank you! great info!
When I contact pac they say this wire harness won't work with a 2013 dodge dart?
Do you guys have someone I can pay to do this to my car cause the person that did mine didn’t connect the cords right and the screen drained my car battery!!!
I want the crappy radio in mine and want a screen with gps. Is it possible?
Amazon should be paying yall I just made a 400.00 order after watching 3 vidios .
pissed off if you used one of the links, they will. Thank you very much.
Can you guys due a Pathfinder
+josea915 we will keep an eye out for one
Please help, can’t I just buy the entire bezel on the limited Dodge Dart? Meaning, buy the bezel that already has the touch screen, and just swap it with the stock radio/bezel? Please help!!!
Would the steering wheel control adapter work with a boss stereo?? Anyone
I'm going to try the upgrade thanks
so with the kit what size radio am i looking at fitting and what is the one in the video
amber lee it will fit any true double din, it is a Pioneer
thankyou
Can you guys do a Camaro
+MasterGXP we just filmed one, just need to edit.
Is the 4200 Nex better than the 5 new radios pioneer released recently in terms of features ? Any news on an updated 4200 nex soon ?
+ninjamaster2009 don't know yet, replacement maybe around October but could be sooner
Is it just that or is they a stock amp that needs to be unpluged
According to Crutchfield u don't have to break off that metal bracket in the back. Guess we'll find out soon as I'm doing mine today
Did you ?
nice, but how about to change the standard analog panel to a digital 7Inch speedometer (Is it possible to do this?). So I bought 2014 Dodge Dart sxt in the USA with analog dashes, and I want to buy 7-inch digital dashes on eBay or Amazon, and change it ) P.s I'm live in Ukraine