arre bhaiya video mast thi you deserve appreciationek request hai. ek most simple jet engine bana ke upload karo plzzz aur agar bana lie to usko plane me install karke uda bhi do 😁😁
in general, the cg of an aircraft should be located at thirty percent of chord. that is a multiplication by .3 in the case of a swept wing, cg should be located at thirty percent of mean aerodynamic chord (mac).
rudder goes on the left stick. assuming a dihedral wing, a novice pilot should learn to put in a small amount of RUDDER for flat turns. generally, the (stick) controls of a model are aircraft are PROPORTIONAL. NOT on-off.
It’s decent, but let’s take it to the next level, bro. Add a custom (FC) for enhanced control and a (GCS) for real-time telemetry. Incorporate FPV for immersive piloting and advanced features like waypoint navigation or trajectory planning. Push the design to be more visually impressive and technically challenging-something that screams innovation. good but not good .
604 because putting servos at the tail makes the tail HEAVY, doing so Should be Avoided. a pushrod of any length can be made using bamboo or a slender piece of wood and two short pieces of steel wire (from a PAPERCLIP).!!! there is NO reason for a pushrod to be short.! if a pushrod is made of thin wire, it should be adequately supported (with GUIDES) along its length; in order to avoiding flexing during 'push'.!
@@Sandeepexplains-p8uas a kota Allen student I want to say self study is way better then offline coaching for cracking iit but if you want good rank you need coaching from 8th class else don't even think about offline coaching it will mark you busrt
Bhaiya agar ham jis din jee ki registration start ka update aaya tha tab se 1-2 din me hi form bhar liya hai toh kya iska ye matlab hai ki mera pehle ya doosre shift me hi exam aayega?
@@tejaskardile210 i generally edit videos on phone so No experience Or baki Coding normal ki hai ho jati hai sahi 👍 But i will suggest kisi or se pucho
![Coheed and Cambria - Searching for Tomorrow [Official Video]](http://i.ytimg.com/vi/hDsYGLbmadg/mqdefault.jpg)
Awe some 🤯
Hmm 🙂
✌️✌️✌️✌️🎉🎉🎉🎉🎉
arre bhaiya video mast thi you deserve appreciationek request hai.
ek most simple jet engine bana ke upload karo plzzz
aur agar bana lie to usko plane me install karke uda bhi do 😁😁
Very good broooo , keep it up👍👍
Thanks bro ❤️
Literally hurts kitna bda mess😂🤧 2:17
Just IITB mess 😅😊
iit bombay rocks😎🔥
Medhavi ki mahnat :
Those who know 💀 those who don't know 🤡
🫤🤫
Towers are waiting 💀
iykyk ☠️💀
Next project me ye bhi poora hoga, let's hope😂
@@amoghjoshi3973 ☠️
in general, the cg of an aircraft should be located at thirty percent of chord. that is a multiplication by .3
in the case of a swept wing, cg should be located at thirty percent of mean aerodynamic chord (mac).
crazy broo wowwwww
❤️
rudder goes on the left stick. assuming a dihedral wing, a novice pilot should learn to put in a small amount of RUDDER for flat turns. generally, the (stick) controls of a model are aircraft are PROPORTIONAL. NOT on-off.
Bhaiya op
🔥
Outro >>>>
Thanks ❤️
It’s decent, but let’s take it to the next level, bro. Add a custom (FC) for enhanced control and a (GCS) for real-time telemetry. Incorporate FPV for immersive piloting and advanced features like waypoint navigation or trajectory planning. Push the design to be more visually impressive and technically challenging-something that screams innovation. good but not good .
1025 when the model is level, the main landing gear should be located directly below the wing leading edge.!
Outstanding 🔥
🔥🙌
❤✨
hii bhaiya apko kuch dm kiya haai plz reply karo and the video was amazing..
Bro all i have done alone for 1 month @ 10th and made it fly 😊.i know how hard is to make them fly more than making design😢 now in 12th
604 because putting servos at the tail makes the tail HEAVY, doing so Should be Avoided. a pushrod of any length can be made using bamboo or a slender piece of wood and two short pieces of steel wire (from a PAPERCLIP).!!! there is NO reason for a pushrod to be short.! if a pushrod is made of thin wire, it should be adequately supported (with GUIDES) along its length; in order to avoiding flexing during 'push'.!
Bhai intro mast tha!!
Thanks ❤️ 🙂
Great video. Most viewed banegi 🫡🫡
Hope 🙃
Greatt work Anurag!! 👍🏻
Thanks ❤✨
Only Anurag 🧐🤨
Usne ice cream and momos dena ka promise Kiya hai iss liye 😂😂😂@@medhavi_iitb
Are yeh sab nhi batana hota😂
@@anuragdesai6969yaad rakhna 😂😂
😍
Thanks bhaiya ❤️
Bhaiya apne coaching kha se li thi? Aur bhaiya m self study kr rha hu it is sufficient? Plss this is last my question ?🙏
My new video will be based on JEE tips
Toh usme cover ho jayegi aapki problem
Stay tuned 🙂
@@medhavi_iitb thanks
Waa re promotion 😂
@@Sandeepexplains-p8uas a kota Allen student I want to say self study is way better then offline coaching for cracking iit but if you want good rank you need coaching from 8th class else don't even think about offline coaching it will mark you busrt
Bhaiya agar ham jis din jee ki registration start ka update aaya tha tab se 1-2 din me hi form bhar liya hai toh kya iska ye matlab hai ki mera pehle ya doosre shift me hi exam aayega?
@@unknownlegend421 aisa kuch nhi hota random allotment hota hai
Bhaiya apke laptop device name and model konsa hai
HP Pavilion Plus
@medhavi_iitb editing , coading ache se hoti hai kya?
@@tejaskardile210 i generally edit videos on phone so No experience
Or baki Coding normal ki hai ho jati hai sahi 👍
But i will suggest kisi or se pucho
❤🔥
@@KUSHALKUMAR-b9p ❤️
Bhaiya is project ka fund kaha se ata h ?
Baap ki jamin bech ke
IITB clubs
Crazy editing dude ,keep it up 🔥!!
Thanks Bhaiya 🙂
0920 design of the stabs is poor. MOST of the mass of a tail wheel can be Avoided by using a simple wire or plastic tail SKID, instead.
1:42 💀
🗿😂
Bhaiya kamariya wale bhaiya kaha se h
Maharashtra
Jo pawan singh ka gana baja rahe the
@@ManavRoy-mai hu bhai bolll
Kon
Her her 😂😂😂😂
1:13 anurag👀💀
😂😂
😂💀
Pokemon and Pokemon master 😂😂😂
😂
Koi sense hai iss baat kaa
Helicopter helicopter
0:42 yeh teeno aisa chashma pehen ke kyu dekh rahe hai😂😂
Wo plane na udne ki wjh se mental health issue ho rkhe h
Bhaiya apka konsa year h
1st Year
@@medhavi_iitb pg or ug?
@ UG
Konsa department?
Aerospace
9:21 : Respect for that RC plane final flight and for Bhaiya +++
❤️
@@medhavi_iitb :))
@@medhavi_iitb kya yeh project all 1st year ke students ko milta hai karne ke liye. pls can u just give a brief info about it. Thank u !!
@@Ashketchum2025-i7b IITB aaoge tab sab pata chal jayega abhi smjhauga toh nhi samjhoge bcoz of some club names and etc etc
@@medhavi_iitb ok !!club related project tha
Average IITian Time pass ☕
Bhai konsi Branch hai??
Aerospace
@@medhavi_iitb Bhai 2025 mains kai liye kuch tips dedo🙂
New Video Soon With AIR 1
8:18 Moye Moye😂😂
😅😂😣
Btw Congratulations DynamaX Flighters 🔥
Are papa woh plane ki toh…..
FR 😢
605 design DISASTER
Ooo triggered insaan audio 😎😎
Nooo
Wo meri audio use karta henn
@@medhavi_iitb aacha yani ki tu pahle aaya tha usse 🤣😂
Coming to iit bombay in 2026
Most Welcome 🤗
@@Sandeepexplains-p8u c*ming on iit bombay in 2026 💀
Editing 📈📈
Thanks 🙏 ❤️
Bhaiya teri girl friend bhi teri group mein hai kya??😅
Bhai ka breakup ho gaya 😢
Bass kar bhai kitna spam karega
Beta Tumse na ho pyega !glider is easy to fly
Fr 😢
12:16 Subtitle Error 😅😂