May be water inlet presser is low, 4C error occurs whenever water doesn't fill up to required level in the tub within specified time. to confirm please fill the tub with a bucket of water manually when rinse cycle starts, if there is no error then the water level sensor is working fine and if the error occurs even after filling tub manually then need to replace sensor and check. and also check if the inlet pipe is bent, folded or squeezed at some point, if yes then straighten it. hope this would be helpful. Thank you, have a GOODTIME....
In my case machine takes water but after level 2 the water comes out from outlet pipe and the machine get hang with this 4C error. Checked with water inlet and blockages still not working. I checked it with changing washing cycle too but same.. 4c error and machine get hang
@@riddhichauhan8859 if your washing machine has pump type drain system then the drain pipe should be raised to the height of machine, if it is passive type drain system then there is possibility that the drain valve is open due to some foreign object which might be draining the water and 4c is displayed as the drum is not filling enough water in given time....the drain valve needs to be checked and replaced if necessary. these are the possibilities I can guess without seeing the appliance, hope this would be helpful. Thank you, have a GOODTIME....
It worked! Thank you so much for posting this video with on point advice 👌 🙌
Happy to know that the video was useful.
Thank you for watching the video, have a GOODTIME....
This helped my friend, Ernest, to finally wash his clothes and stop smelling. Thanks!
I can confirm that Ernest's scent has improved ever since he watched this
4C Issue has been resolved after following instruction in video. Thanks
You are most welcome,
Thank you, have a GOODTIME....
this method working...thankyou so mich it saves my money
You are most welcome,
Thank you for watching the video, have a GOODTIME....
Life changing. Thank you sir
Amazing this saved my time and money 😍 thanks alot..
Thank you, have a GOODTIME....
Thank you sir, this video was very helpful 👍
Happy to know that the video was helpful,
Thank you for watching the video, have a GOODTIME....
Very good vdo, nice explanation 🙏
Thank you, have a GOODTIME...
It worked.. thanks!
Most welcome, Happy to know that the video was useful.
Thank you, have a GOODTIME....
It works, thank you
You are welcome,
Thank you for watching the video, have a GOODTIME....
Helpful video sir ...Tq sir
Happy to know the video was helpful.
Thank you, have a GOODTIME....
Very helpful! Thankyou!😊
Happy to know the video was helpful,
Thank you, have a GOODTIME...
only during rinse ,the 4c code comes. I tried this way, but it didn't work. Do you have any idea how to fix it.
Thanks
May be water inlet presser is low,
4C error occurs whenever water doesn't fill up to required level in the tub within specified time. to confirm please fill the tub with a bucket of water manually when rinse cycle starts, if there is no error then the water level sensor is working fine and if the error occurs even after filling tub manually then need to replace sensor and check.
and also check if the inlet pipe is bent, folded or squeezed at some point, if yes then straighten it. hope this would be helpful.
Thank you, have a GOODTIME....
thanks that's help
Happy to know that the video was helpful.
Thank you, have a GOODTIME....
Hello brother, my washing machine when I turn on all lights are blinking and nothing working please help with this issue
In my case machine takes water but after level 2 the water comes out from outlet pipe and the machine get hang with this 4C error. Checked with water inlet and blockages still not working. I checked it with changing washing cycle too but same.. 4c error and machine get hang
Hi, what model is your washing machine ? model number !
It's SAMSUNG Model _WA65N4260SS. 6.5 kg
@@riddhichauhan8859 if your washing machine has pump type drain system then the drain pipe should be raised to the height of machine, if it is passive type drain system then there is possibility that the drain valve is open due to some foreign object which might be draining the water and 4c is displayed as the drum is not filling enough water in given time....the drain valve needs to be checked and replaced if necessary. these are the possibilities I can guess without seeing the appliance, hope this would be helpful.
Thank you, have a GOODTIME....
Will check with technician... thank you for the help. ...
My 6.5 kg show 9C4 eror code what is the problem
I hope you find your answer Rohit
May god bless you