Это видео недоступно.
Сожалеем об этом.
2021 Ram 1500 Bed Step Install (EASY)
HTML-код
- Опубликовано: 25 ноя 2021
- This is a do it yourself easy installation video for the 5th Gen Ram 1500 Pickup trucks. This accessory step is a must have for your ram truck. It is sturdy and well engineered to take a beating. Thanks for watching ManCave Mayhem! Don't forget to LIKE-SHARE-SUBSCRIBE and just remember"I'm just a man in a cave causing mayhem!" check us out on instagram @ mancave_mayhem.
Nice Job sir... I really enjoyed this video. I have the step arriving today, and so this video was really 'convenient' in aiding me in what I'm supposed to be doing. Thank you!
Thanks my friend I hope it proves to be an easy install for you👍🏻
Got to step on and it was just like you said! Thanks again.
Just installed. Glad I watched this and didn’t undo the wiring harness. Clicked right back into place on step hole. Great add on to my Longhorn! Thanks
I’m super happy this helped out glad to hear that it all worked out for you! It sure is a nice add to the truck🇺🇸👍🏻
Very helpful video and the step is a big help for me. I got it installed in no time and never tried to mess with that harness.
I’m so glad you found it helpful! Thanks for watching 👍🏻
Video was excellent. Installation was difficult for me. I found another video that clarified how to disconnect the connector. Also, I removed the tailpipe to make installation easier.
I have the same harness….was pretty easy to unplug and reroute
Thx for the video!
Glad it helped👍🏻
Did mine yesterday. Sure was a puzzle turning it into place. Well worth it.
I love mine. Not too tough a job either👍🏻
Thanks for the video as going to order this steps and the install looks pretty simple. I need this step to get up and into the bed .
I’m glad it was helpful. Thanks for commenting.👍🏻
That harness is much easier than the other one. There is a video on here about how to remove it. You push the red button towards the rear bumper (it clicks), then push down hard on the tab where the red button was (it clicks), then you can pull up on the white cam arm and the 2 plugs separate. Search for 2021 ram bed step harness and you should find it.
Torque is 120. Please torque those 2 upper bolts are trailer hitch bolts. 2021 newer do not need to disconnect the electricial harness.
Thank you for the torque specs! Much appreciated!
Mines on its way.
Can you install this with the factory one also installed, which retracts on the other side of the exhaust.
The one I installed is a factory one I bought it direct from the dealership and it’s a ram product
@@ManCaveMayhem thank you. I guess what I meant was can you install this one along with the one that comes from the factory that is installed on the inside of the exhaust. So I would have two installed at the same time. One at the corner and one more middle way towards the center. Both on the driver side.
@@aeroliteflyer not sure about that 🤷♂️
Nice install
Thanks my friend 👍🏻🇺🇸
Where did you order the step ?
It’s been a few years now, but I just ordered it from a dealership I think.
Very nice - Thank you !
Glad you liked it👍🏻
I got mine installed today and the only issue is that it seems tight to deploy
They are kinda tight and you have to hit them at the right angle👍🏻
So I just went to install on my 2020 Rebel... they welded a cross support from the mounting plate to the step assembly...it blocks the exhaust...now WTF do I do??
****Edited*****
Slapping myself in the forehead...origami yup. It's installed thanks for the video.
it this available for the Passenger's side?
I don’t think so. I think they just make it for the driver side.
@@ManCaveMayhem that's too bad, Thank you
Great now show us how it clears with tailgate down so you can get in truck
It works perfectly with the tailgate down.
How is the exhaust holding up ok the Ram? I just ordered the same for my 2019 Laramie. Heard the drone was bad after doing more research. Whats been your experience?
So far so good for the exhaust👍🏻
I have a 2021 also, where did you purchase it, or could you provide a link.
I ordered it directly from the dealership where I purchased the vehicle in Arizona. It was kind of pricey about $300. I hope this helps. The name of the dealership is Swanty’s
Does RAM make these for both left and right sides?
I don’t believe they do. I think it’s just the left side.
So no issues with not unplugging that harness and running it through the step?
None at all👍🏻 it went together good
@@ManCaveMayhem hey thanks for the quick reply. Appreciate it
@@joec6512 hope it all goes together well!
I used an impact wrench to get the 2 bolts out super easy and I never disconnected the harness but it was a bitch to do. I tried but the little red tab on the connector flew out from the top.
It’s definitely worth having though👍🏻
Dude getting the tang in that hole is a rear PITA
Yeah for sure it is! It’s like a damn puzzle🤣
Hi where to buy
I bought it from the dealership
does it help with the tail gate down?
Yes! Especially for an old guy like me 🤣
@@ManCaveMayhem awesome
This will NOT fit a 2019 Ram even though they claim it will. Perhaps my 5.7 SLT is too plain. The bolt holes do not line up and the hole for the little "temp holding stick/ball" does not exist in my frame/subframe. So, I pulled off the whole bumper and subframe, (8 bolts) cut off the ball/stick thingy. clamped it on the subframe with Vicegrips and welded it into place. Meh, it works fine, hangs in the correct place and holds my hefty butt. It'l do.
What a pain on the butt! Sorry to hear that. Sounds like u made it work👍🏻
Is this OEM?
Yes, it is.
@@ManCaveMayhem thank you! Great video
👍🤩❗
Not a Dodge
I would really like to. It’s a renamed dodge.
@@ManCaveMayhem renamed Ram
I can't believe he's got a higher up model and doesn't even understand the vehicle. Ram separated from dodge like 10 years ago
@@highkey386 They are all all owned by Stellantis just because they call it a Ram doesn’t mean it isn’t a Dodge. Nissan used to also be called Datsun. Potato potato 🤣
It’s Stellantis. Dodge, ram, jeep, Chrysler, fiat what does it matter 😂
It's not a Dodge.
Dodge ram whatever🤣