Hope everyone's New Year is starting off right! Thanks for coming along. Looking forward to putting these machines to work in 2025! www.youtube.com/@JoeTheFarmer?sub_confirmation=1
Gotta love the bumblebee name! I do like the look of that one! I'm liking the MP9. Looks rugged, love the doors, the bed laying down and the future add on for full doors for the winter.
Thanks ,always cool to see new machines also thanks for the PDI ,greased my 550 and checked all the fluids,some were low.Another great video ,keep them coming,you do a very good job.
I'm really interested in the Hisun. I can't wait to see your review on it. I've been seeing them on RUclips, and I really like them for the price. I'm trying to talk my wife into getting one.
Thank you my friend! It's really cool to see the differences in brands. Some strengths and weaknesses in all of them. SO MUCH FUN. I feel like I never grew up. Lol.
Yes sir it is. Gonna be a busy tear for sure! Lol. The Cub Cadet is a licensing thing I believe. But looks super cool in person. Nice change up from camo. 👍🏼. Take care brother!
I love that black and yellow! It looks so good in person. Not sure about the bar doors or bed, but that can be swapped out I'm sure. It's no 760 but what is!?! Lol
Hey Gary! Thanks for watching. PDI is usually done by a dealer pre delivery but in this case, it would be post delivery. Many “box stores” have easy returns so if there was an issue…they could opt to remedy the issue, swap it for another unit or give a refund. I would do that 100%
Great question. The Hisun 550's actually have 550cc's so they are larger than the Massimo engines. The Axis 500 is closer to the 493cc engine (496 I think). I will be sure to address that in future videos. Thanks for watching!
How hard is it to get parts and service for these machines? I would like a UTV to use on my property with a dump bed but I can't justify paying Polaris money for one.
Hey Charles, thanks for watching. My experience has been that parts are very simple to find and service was simple if you have a service center close. With that said, if you watch my channel you will see that I have used over a dozen side by sides in my videos. The only two that had issues were the original BigHorn 550 (which was a prototype) and the new Massimo 1000 which was repaired at a local repair center. The irony is that the Massimo 1000 is the most well know builder and the most expensive machine. Lol. Is your property hilly? How many acres do you have? What do you want to haul? I can help make a recommendation if I know that. Appreciate you Charles!
My father in law bought the same one. Almost $30k. Its a Honda which is good, but hard to understand why so much more money. But hey; you have a great machine!
😂😂😂. Sorry for the cost; but you are welcome for the memories!!! YOLO! Appreciate you watching brother. Please tell your grandson Joe The Farmer says hello!
Like to see the "Holy Cow!" grab bars. A lot of male u-tubers joke about thier wives behind the wheel.The ladies know how to roll, so get outta their way. Good video on the quality and engineering going into these vehicles.
Ha! No joke here! Holly is as tough as she is pretty. She will put that machine through the paces. I'll need to get her to share her experience with it. I'm impressed so far with the build quality, but time will tell! Appreciate your support my friend.
I bought a new Hisun 750 Sector in December 2023 had electrical issue in February 2024 2 weeks later got it back 3 weeks later about March 15Th. had to load it a chain fall again electrical issues was told computer was damaged and also needed a wiring harness the plug in pin were fused into the computer still am still waiting for it to get repaired!!! I would NOT recommend a Hisun!!!
Thanks for sharing your experience. If these have issues, I'll call it straight. No sugar coating it. But all machines break and have issues...my new tractor was split at 12 hours which stunk...but it was fixed and never had another issue. Hope it gets resolved quickly for you and that you get years of great service from it. The two Hisun's I owned prior were fantastic machines. And I beat on them bad.
I saw that, great channel. That machine was a 760 built by linhai. But I remember him saying that a plastic part was the same as a plastic part from canam. I'll never understand why plastid goes in engines, but I'm not the sharpest. Lol
i really think most people are affraid to buy these odd ball no name brands because thier affraqid nobody or few places will fix n work on them and affraid that parts are gonna be hard to find get n replace
I don’t disagree. Thats why pdi and maintenance are important, along with seeing who your local shop is prior to buying. We have a great shop close that works on all the box store brands. Thats where I took that pic.
Hey Frank! Which one doesn't have leg room? The Cub Cadet and the MP9 550 are both very specious. The 400 and 500 are noticeably more compact. The Cub Cadet is actually really large. Thanks for watching!
Hope everyone's New Year is starting off right! Thanks for coming along. Looking forward to putting these machines to work in 2025!
www.youtube.com/@JoeTheFarmer?sub_confirmation=1
Gotta love the bumblebee name! I do like the look of that one! I'm liking the MP9. Looks rugged, love the doors, the bed laying down and the future add on for full doors for the winter.
I’ve got my eye on that one too, the MP9 is definitely one to watch for sure!
Nicely made video! I love the look of that Cub Cadet Challenger!
Thanks Lucas, appreciate you watching. Man I love that yellow too! Just a really nice looking rig. Hope you are doing well in that Kentucky weather!
Thanks ,always cool to see new machines also thanks for the PDI ,greased my 550 and checked all the fluids,some were low.Another great video ,keep them coming,you do a very good job.
Thanks for watching and for the support! This isn’t possible without ya. Take care!
Really glad I discovered your channel! Another entertaining and informative video. Looking forward to seeing your experiences with these machines.
I’m glad too! Appreciate your support my friend. Gonna be a fun year!
Thanks Joe. I would not know about half of these brands if you didn't show us. Thanks for the video. Will be checking them out.
Pleasure is mine Bob. I love playing with grown up toys. Thank you for your support, without you it doesn’t happen.
I'm really interested in the Hisun. I can't wait to see your review on it. I've been seeing them on RUclips, and I really like them for the price. I'm trying to talk my wife into getting one.
Can’t wait to see em all reviewed!! I’m with you, I love all those 40K machines but could never justify even close to that!
Thanks brother! And I would hate to spend $40k the way I treat them!
Can’t wait for the demo. Love the 250 lol. Thanks for sharing and have a great day, Joe.
Thanks for watching! The 250 is going to be a blast to show everyone...but not sure Clay is going to fit for long!!! Lol. Have a great Sunday!
Can't wait to see the reviews
Thank you my friend! It's really cool to see the differences in brands. Some strengths and weaknesses in all of them. SO MUCH FUN. I feel like I never grew up. Lol.
I absolutely love your videos, down to earth and straight forward ✅💥
Appreciate it my friend! I try to be honest, let you know what I think. Thanks for the support!
That is a lot of machines my friend. I didnt know cub cadet made one. Good stuff!
Yes sir it is. Gonna be a busy tear for sure! Lol. The Cub Cadet is a licensing thing I believe. But looks super cool in person. Nice change up from camo. 👍🏼. Take care brother!
Like that cub cadet as a kid with 3 brothers we mowed lawns we had a 12 hp cub. It was tough. Looking forward to you using them all.
I love that black and yellow! It looks so good in person. Not sure about the bar doors or bed, but that can be swapped out I'm sure. It's no 760 but what is!?! Lol
Honest video😊
Thanks for watching!
What a fun video. I love these machines. Hey, wouldn't the PDI actually be a Post Delivery Inspection?
Hey Gary! Thanks for watching. PDI is usually done by a dealer pre delivery but in this case, it would be post delivery. Many “box stores” have easy returns so if there was an issue…they could opt to remedy the issue, swap it for another unit or give a refund. I would do that 100%
How many of these are rebranded mosimo's or Hisun's?
Massimo would be a rebranded Hisun.
@@JoeTheFarmer so are they all Hisun?
Yessir. Hisun is a manufacturer and they build for other brands as well as their own
The strike 250r looks just like the little Rzr I bought my kids the 170 Rzr years ago and looks a lot like this one
Probably very similar. I think this one runs about $4,900. Nice for a youth sxs!
Boys and their toys! Love it! Let me know if you need me to come drive them around 😂😅🇺🇸🚜
Come on brother! There is one for everybody!
Do you haft to put everyone of them on battery tenders ?
Probably not a bad idea.
Are all these other than the stike using the same basic engine in 493cc size like the massimo 550?
Great question. The Hisun 550's actually have 550cc's so they are larger than the Massimo engines. The Axis 500 is closer to the 493cc engine (496 I think). I will be sure to address that in future videos. Thanks for watching!
might need a bigger barn??
If only a friend would come help me raise one.... 😅
Something I had learned recently and I didn't hear it mentioned that the Hisun are assembled in the U.S.
They are. Assembled in the US (Texas) and many of these machines were actually manufactured in Vietnam.
How hard is it to get parts and service for these machines? I would like a UTV to use on my property with a dump bed but I can't justify paying Polaris money for one.
Hey Charles, thanks for watching. My experience has been that parts are very simple to find and service was simple if you have a service center close. With that said, if you watch my channel you will see that I have used over a dozen side by sides in my videos. The only two that had issues were the original BigHorn 550 (which was a prototype) and the new Massimo 1000 which was repaired at a local repair center. The irony is that the Massimo 1000 is the most well know builder and the most expensive machine. Lol. Is your property hilly? How many acres do you have? What do you want to haul? I can help make a recommendation if I know that. Appreciate you Charles!
2nd Christmas 🎅 👍
Yessir; but more work for the New Year. It's a hard job, but someone's gotta do it! Lol. Appreciate you brother. Doesn't happen with you.
I bought the pioneer 1000-5 trail for 27 thousand after was all said and done, and it didn't have a windshield or those heavy duty A arm guards.
My father in law bought the same one. Almost $30k. Its a Honda which is good, but hard to understand why so much more money. But hey; you have a great machine!
@@JoeTheFarmer the live valve shocks as a set of 4 are 5 grand.. 😕
Bonkers.
My 6 year old grandson just saw the 250,......Thanks Joe😠............😉
😂😂😂. Sorry for the cost; but you are welcome for the memories!!! YOLO!
Appreciate you watching brother. Please tell your grandson Joe The Farmer says hello!
@@JoeTheFarmer As always love your content! Logan says howdy.....
Hey Logan!!! Thanks for watching little buddy!
CF MOTO hands down.
CF Moto makes a great machine I hear. Been trying to get them to let me compare it to the others but no luck.
@JoeTheFarmer honestly I've never really heard a bad review on any of their stuff just more personal preference gripes.
Their new 1000hd is legit. Would love to give that a try! They are creeping up in price too now. But they are earning the reputation so I get it
@@JoeTheFarmer Their new turbo 4 seater is a good buy I think. The regular UForce is still a good buy also
Like to see the "Holy Cow!" grab bars. A lot of male u-tubers joke about thier wives behind the wheel.The ladies know how to roll, so get outta their way. Good video on the quality and engineering going into these vehicles.
Ha! No joke here! Holly is as tough as she is pretty. She will put that machine through the paces. I'll need to get her to share her experience with it. I'm impressed so far with the build quality, but time will tell! Appreciate your support my friend.
Cute golf cart😂
Thanks for watching
😂😂😂😂lucky Joe should be your name😊😊😊😊😊
I feel very Blessed man. But none of this happens if you don’t watch. So thank you for the support
They’re way too much money for the junk you get
Do you own a Hisun machine?
I bought a new Hisun 750 Sector in December 2023 had electrical issue in February 2024 2 weeks later got it back 3 weeks later about March 15Th. had to load it a chain fall again electrical issues was told computer was damaged and also needed a wiring harness the plug in pin were fused into the computer still am still waiting for it to get repaired!!!
I would NOT recommend a Hisun!!!
Thanks for sharing your experience. If these have issues, I'll call it straight. No sugar coating it. But all machines break and have issues...my new tractor was split at 12 hours which stunk...but it was fixed and never had another issue. Hope it gets resolved quickly for you and that you get years of great service from it. The two Hisun's I owned prior were fantastic machines. And I beat on them bad.
Parlate in italiano allora vi capiamo avete capito ....speriamo ok....🎉🎉🎉🎉🎉🎉
scusate, non parlo italiano, ma grazie per la visione!
Be careful some of these cheaper are built with plastic oil and water pump gears
I had a Ford explorer that had a plastic guard on a timing chain. Stupid design, but still running 20 years later. Maintenance is everything.
@JoeTheFarmer there's a RUclips channel called 2 vintage that just did a rebuild on one that had less than a 1k mileage
I saw that, great channel. That machine was a 760 built by linhai. But I remember him saying that a plastic part was the same as a plastic part from canam. I'll never understand why plastid goes in engines, but I'm not the sharpest. Lol
i really think most people are affraid to buy these odd ball no name brands because thier affraqid nobody or few places will fix n work on them and affraid that parts are gonna be hard to find get n replace
I don’t disagree. Thats why pdi and maintenance are important, along with seeing who your local shop is prior to buying. We have a great shop close that works on all the box store brands. Thats where I took that pic.
Love to have one but no leg room. Probably sell million more if they had leg room
Hey Frank! Which one doesn't have leg room? The Cub Cadet and the MP9 550 are both very specious. The 400 and 500 are noticeably more compact. The Cub Cadet is actually really large. Thanks for watching!
How tall are you?
Me? I'm 6'4". I have no issues with the leg room.
@@JoeTheFarmer no sir! Was asking that guy, I’m 6’ and have no problem with Axis 500
@inthewoods3237 i found the axis 500 to be pretty comfortable. Snug for sure, but surprisingly comfortable
No thanks..I'll keep my mule.
Nobody is gonna try to take it from you buddy.
@@JoeTheFarmer Someone has tried,
Dang. That stinks! For real though; had a mule. Great machine.
Joe “Anyone that tells your not excited about getting all these machines will be lying” 😂😂😂😂😂
Absolutely! I love all machines man, they are a blast to demo. It's so cool seeing what is different between them. Thanks for watching brother!
What a big waste of time!
What was a waste of time?
@@JoeTheFarmer Your video
@ you feel good now? Better? You were rude to a stranger on the internet. Cool man. Keep being you.