Making A Heavy Duty Anvil Stand - With Hammer Storage
HTML-код
- Опубликовано: 13 июл 2021
- In this video I make a heavy duty steel anvil stand out of some scrap material in the shop. The anvil mounted to the top is this $325 anvil I picked up on ebay. Check out the video about that anvil here:
• $325 Ebay Anvil VS $68...
Check out the Diablo Steel Demon Cermet Blade Here:
homedepot.sjv.io/Yg1qLj
#thdprospective
Check out some tools and materials I used in this video below:
As an amazon affiliate I earn from qualifying purchases:
Milwaukee M18 Grinder:
amzn.to/3r7qxh8
Pneumatic Beveling Tool ($88)
amzn.to/3e8uDRb
amzn.to/3eIUqP4
amzn.to/3dPyEdh
Pferd VIctograin Disc:
amzn.to/2U9apQ5
For more info, check out Torchmate here:
bit.ly/3pWGLr9
For info on the Lincoln Power Mig 360MP welder I used in this video:
bit.ly/2W1Tk8L
I like that I am glad you didn't rap a bunch of chain around it
Great build. Looks very efficient!!! Enough room for tongs gloves amd material!! I really dig it!!!
That’s one hell of an anvil stand man! I’d love some weld on hammer slots like that.
Nice artwork with that plasma cutter. You have many nice toys
to play with. Your gonna need a bigger boat!
You got that right! Thanks for watching!
It's perfect you can see the hammer you need and quickly get it.
Love the ToT method of cutting metal. I should try that someday.
If you don't need the added weight of the sand, you can deaden the noise instead by filling the cavity with 2-part rigid polyurethane foam. That's what's in my anvil stand, made from 2x12s and it is wonderfully quiet.
Love the this old tony trick it always works
Nice job I need more hammer storage on my work bench lol
Personally, I would've done even less welding but hey, you managed to keep it flat and to each their own. Good work and good inspiration. Would love to start blacksmithing
You have a great thing going on. Great workshop.
Thank you for following along!
One minute in and I’m already missing the pile of huge steel plates and the plasma cutting table. Oh well. Tree stump it is. 😅
killer design idea Chris. turned out very well. always great to learn from your videos. keep up the Great craftsmanship and hard work. weld on. keep welding. fab on. keep making. god bless.
nice job
I like that stand. Only one minor thing I might not like though, I can immagine allot of bounce to your tools when you drop them in the slots. A little bounce and racket to follow. Yeah, I know, I'm talking about noise at a forging "station" but everything does add up...
If hammer storage becomes an issue near the top, try basket type pockets on side of the tube steel w/hammer heads in the bucket (handle's up for easy grab)
Nice 👍
I thought about making a metal stand, but making it short enough to put a 2×10 board between the anvil and stand, that way it won't ring.
Great video. Project looks great, well designed and fabbed. Mahalo for sharing! : )
Thank you for watching!
Now you can store a few hammers out of your collection😉
Sweet! Been trying to figure out a good way to hang my hammers around the anvil. Currently using 6x 4x4s bolted together for the stand.
Arboga Maskiner. There you have some old quality machinery from Sweden 👍😀
Try bed of silicone under the anvil to dull the ring - as well as some large strong magnets.
great work!!
I'm jealous! I need more hammers!! 😁😁😁
Chris repeat after me " FUNNEL" hahahaha. Just kidding my friend .. Great video , great build and set up. As always Stay well your family and you .
Super
Варить крышку не надо надо сделать на болтах и положить мешок в трубу и насыпать в него песка. Делай так чтоб конструкция была разборной и ты мог её передвинуть если нужно на другое место сам безо всякой помощи , крепления для стуловых тисков лёгкое ,при таком креплении нельзя в них бить молотком они будут прыгать , нужно или утяжелить конструкцию ,или сделать шире угол ножек тогда будет устойчиво.
Make more vedios sir 🇮🇳
How much does that plasma table cost?
I'm confused to why he doesn't paint it?
How do you like that 132# Amazon anvil?
Overall I think it’s a good value at under $325. It’s a cool shape and e rebound is good. I haven’t put too much metal on it so I can’t speak to its lifespan but so far it sure looks cool!
I have the 66# version of it and you can't go wrong for the price. I wish I had waited till that one was back in stock but I can't complain. Just try not to strike the face of the anvil with a hefty hammer blow is all I can say as advice. I have a couple dents from beveling blades. That stand you made is awesome! My stand is a hard maple round with a large rope wrapped and nailed to create hammer and tool storage.
You destroyed the link to the diablo blade
🤦🏻♂️ fix it! Thanks for the heads up!