Segway Ninebot Max G30 | SOLID TIRE INSTALL | No more flats
HTML-код
- Опубликовано: 28 мар 2022
- How to install a Solid tire on a Ninebot max g30. Rear motor solid tire installation. Need two people to get it done. As long as you have the tools to change it your good.
Amazon link to tire:
amzn.to/3Zh0wNr 
Авто/Мото
I put a solid on my rear and now it spins great with no load but it's not slow to accelerate and won't get to speed and motor makes a loud humming noise. Sadly it's far too rough for me so I will go back to air. Great video as well :)
Rekt the entire rim nice! And also put the tyre on with wrong direction......
Hahah Why are you trying to ruin the fun man
Thank you for a good video, the last part went really well with a tongue and groove plier.
When he said, "leave the dog alone" - I felt that.
Great job guys
Put a solid on mine and it works great.. no more annoying flats.. yeeeeew.. and it feels safe too.. nothing wrong with it..
This is cool, but on my max G2, i would prefer to put PMT tires and upgrade the front suspension to a fork style dual suspension and then upgrade the battery to 45 volt and get a disc brake kit for the rear tire to be able to stop better. But thats just me and it would obviously take a lot of work before it can even be done.
oh for sure. front suspension i think is key. I didnt have the money for that. But i agree you feel all the bumps in the front so that would be my route if i had more money.
Who makes a good fork suspension for the G2 ? I'm going to look into the PMT tires as well. My son is wanting to do some stuff to his.
Just buy a ready scooter.❤
Can they fitted with 10x2.5 tires and rhey do look way better then 60/70 6.5 tires
I was over here cheering you guys on like come on tire get on there and yes damnit lol
Mine came with solid rubber tires (HiBoy S2 Pro) and they are rock hard with hardly any flex at all. I'd like to replace them with honeycomb tires but they look like a pain to remove 😩.
I did it my self in 5 minutes you didn't lube the tire after boiling it ,I just put my knees on the bottom and lubed the rim with tire lube good video though
You can’t see it in the video but we did we use some dish soap. But that’s great you were able to do it by your self. It was hard with two people I can imagine just how hard it was for one so hats off to you.
Donde estas localizado? Cambiame la mia y te pago..
@@VehicleMods I find it hard to believe he did it by himself...I tried...after boiling it and lubing it and making a custom stand to hold it and using giant tire irons.......
How did you do it?
Could you break it down easily please?
I'm trying to do the changing on my own as well
I did it myself on both my ninebot max s I boiled the tire for 5 minutes while it was boiling I lubed the rim with tire lubricant then I kneeled on the rim on the floor and used my 3 bicycle tire irons and popped it on , it was easy the tire is very pliable when it’s hot , I used a bath towel to push it on so I didn’t burn my hands , but in all fairness I’m in the tire industry for 27 yrs
Why doesn’t my T15 bit work with this
Tool list?
Off topic but does anyone know how to remove the yellow stripes from the rims ? I have tried a heat gun and also acetone but they seem to be painted / stuck on pretty good ? id like to jiust have the matt black rims with no colour ...
Maybe just paint over them and repaint the whole rim, might looks pretty cool. Or you could mask it off and pray it over with maybe a red or smthn
Is the ninebot max and the f30 scooter tire the same size??
Good question
Yo no puedo cambiar la mia .. 😩
tyres on backwards
and a messed up rim
Don’t do this guys ur connectors will melt and range and speed cut off by 50% but if u really want to upgrade ur connectors first
What is this??
Why using hot water.
No need hot water for me only 5 mint for fixing
For how long you put the tire in the water?
I’m tryna figure this out as well
15 minutes behind that dam loud music!!!!!!
This is the fucking hard part!
After all, you completely destroyed it :-) as I saw it, I would rather exchange it myself at the idea of how they do this in the service :-)))
why do you have a valve there???
I was going to fix it the first time. The original was ripped before getting the solid tire. After the solid tire install it’s not needed. It’s just there. No need for it.
I put 2 fingers of slime everytime i would try to fix that ONE SMALL puncture in my tire, and everytime it would open up and lose air while riding. Then i put the entire fucking bottle of slime in until the wheel felt solid, and then it burned my cables because the tubeless had become as heavy as a rock from the slime. So i changed to solid tire for the rear and now indont have to worry about noone repairing my ninebot in the entire fucking country for less than 100$
Actually the tubeless tires on the G30 are very easy to fix (with flat repair kit/slime). The solid ones wil give you Parkinson's 😬
Lol that was funny. I tried slime tied all that this is the second tire now. So I just decided to do a solid one
Hey where do I get the flat repair and slime
🤣🤣🤣🤣 yooo imdead!!
🤣🤣🤣
Slime didn't work at all. I guess the punched hole on my scooter wheel is too big.
I would have just get a scooter that comes with solid out of the box. Save tons of hassles and pain. Don't think I could even do it myself. There are plenty of scooters with similar spec that has solid tires now. Some comes with suspensions and cheaper as well. Such a no brainer if you haven't get the scooter yet.
You didn't show how you locked down the hub! Boo.
lol i got my solid tire on all alone and btw im 14
Does it need air?
🤣🤣🤣🤣🤣🤣
A solid tire???!!!😢
Are you kidding us??!!😂.
The threads are on backwards! you have to re-do it.
The scooter is upside down. So it’s in the correct direction.
Solid tire with the suspension mod!
Bruh if yall had it difficult ima be impossible by myself
They did it the wrong & hard way.Amatures!
Bez gotowania mozna zalozyc przy pomocy opalarki 15 minut nagrzewania dwa plaskie srubokrety i opona wskoczyla .
Too bad you absolutely destroyed that rim.
Better without that loud musick, which drowns out your voice!
Better next time.Thx.
With this video I realized that it's likely impossible to install it alone.
It's not even worth it, riding is uncomfortable and almost seems unsafe
Poooooooor rimmmmmm
Bad tool not good job at all😮
😳bruh… two grown men for one job? I’ll just buy a new scooter.
So you’re willing to spend $1000+ instead of a $45 fix that will take some effort 😂😂 fucking idiotic
Waste of Money and comfort.I have 715 miles on my Max G30D2 and never had a flat because of that anti puncture Inlay.
1300 Miles and same here
Anti puncture inlay?
@@WizardD.King17
There is a gel like layer inside the original tubeless tires that will fill in punctures up to a certain point
Luvky you. I have had two flats backwheel after approx 1000 miles. After going through that it's solid tires all the way.
well, I had less than 200 miles and have had 2 flats that the gel inside the tire did nothing for. If you had to replace a tire once you would change your tune here. I'm on my 2nd flat now and I'm literally considering throwing the scooter away over going thru the headache of taking the tire off and replacing it.
*IF* I end up fixing it, I'll 100% use a solid tire.