I can appreciate that you didn’t edit out your “lessons learned”. This gives people actual perspective of what installers encounter while doing installs. Turned out nice!
Yes definitely agree no edit so you can see what really goes on unlike these other Jokers editing stuff and make it look like an install came from Alice and Wonderland
I agree, it is nice to see that. At the same time, it would be nice to have a smooth install video as well so you could follow step by step. Just a thought.
Your attention to detail is amazing. The fact that you took things apart multiple time to make it right rather than just doing a sub par job is a true testament to your work ethic. Great job...love the Video. I am in San Diego...might have to drive up to you to get some things installed
I remember when I bought a pioneer head unit for my geo metro and had it installed in 15 minutes before I went out for the night. Oh how times have changed.
Hell of a install. Much more complicated on this ford than my 4runner. Just a piece of advice there is a firmware update for the XAV-AX5000. You need both the USB 1 and USB 2 to do the update. Good thing you still have access to them.
Man when they are going to release wireless powered HU. 8 years is alot for just wire protection. Sick install. Kinda tense install with all these modules and plugs. The end of the video is relief when everything worked.
*Powers on stereo* *All airbags deploy simultaneously, and front ball joints fail* Joking... this is an awesome and meticulous install. Very nice to see you using solder during the harness build. On a side note, it's always fun to solder then realize you forgot a piece of heat shrink.
I would do, too. Especially on my Mustang where Metra also has two kits for. At least on my Mustang the HVAC interface from Metra is not really good. Kinda like a digital control, i.e. constantly switching between ice cold and really hot to mix the air to reach the desired temperature. In addition the blowers make some strange noises which aren't there with the stock controls. I therefor ripped the Metra kit out again and put in a SYNC3 retrofit.
Great job! So many modules and cables in these now! I’m watching this and getting a sinking feeling and thinking “I’ve got a bad feeling about this...”
That's the best looking after market install kit I have seen. Looks almost factory. Question : The truck had existing Sync which has a built-in mike. Why did the Sony not utilize the Sync mike instead of having to install a separate mike?
The Sony doesn't utilize it bc the radio itself doesn't retain sync. The module that was installed does. Because of this, SYNC operates almost completely independently of the radio.
That's a nice upgrade, but the amount of wires needing to be stuffed in the dash is nuts! I still enjoy doing these installs from time to time even with that said. Lol.
Would be great if you press that INFO button (bottom right of HVAC LCD) and show us what happens. According to Metra, this is supposedly the retained Sync world. But Metra's terrible doc does not go any further into it. After you press INFO, does the screen retain 100% of Ford's 4.2" screen? including phone pairing options and a USB mp3 player? (assuming your factory USB port is still plugged into the APIM, or Sync module)
I can't get audio on front speakers after installation of this kit. My understanding is the Gray and White wires go on the 16pin harness and the remainder purple and green on the big 5834 harness. Would you have an idea on what to Check.
Great video. I have a question, I have a 2007 Ford Mustang. Does your company have the same thing for the most part in the video for my car? As well as good quality back up camera and how to I stall properly.
Good job, I put a Pioneer 4400 Nex In my Chevy avalanche and the biggest Problem I had was putting it back in the dash with all the wiring. I was so frustrated i had walk away from it a finish the day.
I'm sure that when you started the video I had a haircut like that of rod stewart ... thanks, I liked the video, it was easy for me to understand your English (I do not speak it, and I read it a little bit more) lazy put the subtitles of the video ... thank you very much sir!
So this is completely plug and play? No reprogramming of anything? I was told going from the little 4" screen to 8" screen with NAV is a nightmare. This seems a WHOLE lot more simple.
Got a question for ya. 2013 f150 had the 4.2 screen i have the metra kit 99-5846b kit. I'm not getting inside and outside temp displaying on the metra display which my original system had, had outside temp not inside. and i'm not able to get the rear cam to my deck instead of my rear view mirror. everything else is working good and pretty happy overall except the price but i get it there's a lot into this kit.
After preforming this kit to my vehicle I am now hearing static going to that door speakers but it’s stop when the unit is muted or music is paused and ideas or help on this topic ?
I've got one a my 2018 LT no Bose and it's a Kenwood excelon and I have full function. Nav, outside temp, tire pressures, Bluetooth, wireless apple carplay and Android auto.
Quality install, nice work and thatnks for keeping the few OOPS moments. Anyone whos installed a car stereo has had theyre share and had to redo or rewire a OOPS. Looked great, except for the Metra touch screen climate controlls. Personally I would prefer the factory styke controlls.
Thanks Todd! Yea we wanted to change it up and put more of the minor mistakes and moments of trying to figure things out to make it more relatable. Glad you liked it!
@Qualitymobilevideo I see you have 3 red wires connected and 3 black wires connected together. Current installer is not getting the head unit to turn on. Thinking that's the issue. Thx
Does your phone have to mirror everything the radio screen sees? For example can you have texts open on your phone and waze navigating on the head unit at the same time?
What if i just wanted to run the interface and harness cause i have the 2016 lariat 8.0 system without sony , i dont care about the truck info on the radio i just want my leds to change color still on inside my steering wheel controls my sound and back up camera and usbs because i already have 2.. possible? i dont want the dash kit
Will any double din fit in it? Cause I just Bought this for my mustang and I bought a double din radio but it’s a 6.8 inch, I didn’t know if it would fit or not
the joke about the nickelback cd made me chuckle because we bought a 09 f-150 as kind of a beater and there was actually a nickelback cd in it when we got it home
In April I bought an F-150 that has this exact trim kit with a Kenwood Touch Screen. The radio is great but the touch screen AC controls ARE GARBAGE!!! The air only blows cool 50% of the time and now after 5 months of owning the vehicle the AC will not turn off. The touch screen does not function at all. The only function I have left is airspeed and temperature which are controlled by the buttons on the left side. Has anyone else encountered this and if so have you found a solution?
The stereo will yes! And you have two options for a dash kit for the installation: www.qualitymobilevideo.com/95-5820b.html www.qualitymobilevideo.com/95-5820s.html
Although, I get that this video was about the installation of the android unit, I think you should have also taken this time to upgrade your tweeter to a better tweeter that has a big and stronger magnet and cone. Just my opinion.
what do you suggest? I have a 15 f150 loaded xlt with the touch screen and sync 2. what upgrades can I do on the cheap to make my system sound good. I don't know car audio stuff at all. I'm also in Canada..
@@alexcockerill Check out the website: crutchfield.com. Plus there's tons of YT videos that describe the what and how's about car audio. But keep this in mind, the bigger the magnet on the speaker, the better the speaker cone material AND the higher the OHMs on the speaker, will produce the better sounds. But with tweeters, most of the tweeters on the market are 2 ohms (for the cheap tweeters, like in most cars) and then 4 ohms for a slightly better speaker. You'll mostly not need a tweeter at 6 or 8 ohms. But I don't think they make tweeters with these 2 higher spec's. I don't know, maybe they do? AND if you are considering to upgrade your car audio sounds with an AMP, then the higher the RMS wattage, the better too. That's RMS, NOT PEAK. Some manufacturer state the wattage on the package, but when looking closely, it's PEAK, not RMS, which means the product won't produce the better sound and that the manufacturer was just playing on words with the spec's. OH and when choosing a speaker and AMP the broader the frequency range spec on the part, the better too. Meaning, some ranges on speakers and AMPs only go from 10,000 hz to 40,000 hz. This is fine, but if you can get a broader range like 4000 hz to 60,000 hz, then customizing your sounds will be better too. Not sure if even this range exists, but was just giving you an example of what I meant in terms of a "broader range", is all. AND not all "NAME BRAND" products have the best spec's when it comes to audio. Sometimes non-brand products actually can sound better at a cheaper price too, just because of the spec's of the product. SO, always check the spec's of what you're considering to buy, don't go off brand name. Then once you get your new audio equipment installed into your car, you'll want to perform an audio tune and fine tune your system for the optimal sounds. Placing your highs, mids and lows into the best ranges. Like I said there's plenty of videos on youtube to show you how to do this.
That is a very important question. The metra kit says it is not compatible with Trailer Assist. That is the only thing stopping me from moving forward.
not a hard install for sure but id use the pac dash kit part RPK4-FD2201. much better kit and data bus than anything metra can put out. and in most cases its cheaper. i found them for my customers around $380-450.
Say hello to ya motha for me....
She said..Heyyyyyyyy big boy... lol. Love you fools... keep up the gr8t videos..
BAHAHA @@luisacevedo324
Luis Acevedo ggg
Btw you spelled it wrong
I can appreciate that you didn’t edit out your “lessons learned”. This gives people actual perspective of what installers encounter while doing installs. Turned out nice!
Glad you liked that! Wanted you guys to feel like you're in the car going through all the steps with us
Yes definitely agree no edit so you can see what really goes on unlike these other Jokers editing stuff and make it look like an install came from Alice and Wonderland
I agree, it is nice to see that. At the same time, it would be nice to have a smooth install video as well so you could follow step by step. Just a thought.
Your attention to detail is amazing. The fact that you took things apart multiple time to make it right rather than just doing a sub par job is a true testament to your work ethic. Great job...love the Video. I am in San Diego...might have to drive up to you to get some things installed
Thanks bud appreciate it!
Watching this just changed the whole trim level of truck that I would buy. This install is a game changer!
Thanks Alan!
I remember when I bought a pioneer head unit for my geo metro and had it installed in 15 minutes before I went out for the night. Oh how times have changed.
lolol
What do you all think of this install!?
Quality Mobile Video why wouldn’t you use the PAC kit that is actually going to work. So many problems from that crappy kit from metra
Hell of a install. Much more complicated on this ford than my 4runner. Just a piece of advice there is a firmware update for the XAV-AX5000. You need both the USB 1 and USB 2 to do the update. Good thing you still have access to them.
Man when they are going to release wireless powered HU. 8 years is alot for just wire protection.
Sick install. Kinda tense install with all these modules and plugs. The end of the video is relief when everything worked.
Agreed!
What kind of tape do you use on your wires?
*Powers on stereo*
*All airbags deploy simultaneously, and front ball joints fail*
Joking... this is an awesome and meticulous install. Very nice to see you using solder during the harness build. On a side note, it's always fun to solder then realize you forgot a piece of heat shrink.
LOL thanks Ryan! If only you all saw everything that doesn't make the cut and all those minor mistakes
Personally I’d prefer to keep the factory climate controls.
Then the PAC kit is the one for you. It's also the better kit...
Idatalink is better than the PAC
@@alextrainor2552 Sure. Unless you're doing this Sony radio...
I would do, too. Especially on my Mustang where Metra also has two kits for. At least on my Mustang the HVAC interface from Metra is not really good. Kinda like a digital control, i.e. constantly switching between ice cold and really hot to mix the air to reach the desired temperature.
In addition the blowers make some strange noises which aren't there with the stock controls.
I therefor ripped the Metra kit out again and put in a SYNC3 retrofit.
Great job! So many modules and cables in these now!
I’m watching this and getting a sinking feeling and thinking “I’ve got a bad feeling about this...”
LOL
Thank you so much for your nice supports
Y Abbasi ??? Are you the owner?
@@FrezzyYT No my friend
Being the owner of a 2017 and 2019 f150, I love it
Woo!
Good video ... but you said the owner wants to keep SYNC.... why you still use the microphone
That's the best looking after market install kit I have seen. Looks almost factory. Question : The truck had existing Sync which has a built-in mike. Why did the Sony not utilize the Sync mike instead of having to install a separate mike?
The Sony doesn't utilize it bc the radio itself doesn't retain sync. The module that was installed does. Because of this, SYNC operates almost completely independently of the radio.
If the receiver had hdmi in it would be perfect. No extra modules and down scaling quality over composite.
Agreed!
That's a nice upgrade, but the amount of wires needing to be stuffed in the dash is nuts! I still enjoy doing these installs from time to time even with that said. Lol.
It would have been even more challenging if it was a full sizes double din chassis!
@@Qualitymobilevideo challenging, try impossible! 🙃
How is that tape called, which he wrapped around the cable at 10:20?
Tesa Tape. Available here: www.qualitymobilevideo.com/51618.html
Would be great if you press that INFO button (bottom right of HVAC LCD) and show us what happens. According to Metra, this is supposedly the retained Sync world. But Metra's terrible doc does not go any further into it. After you press INFO, does the screen retain 100% of Ford's 4.2" screen? including phone pairing options and a USB mp3 player? (assuming your factory USB port is still plugged into the APIM, or Sync module)
I can't get audio on front speakers after installation of this kit. My understanding is the Gray and White wires go on the 16pin harness and the remainder purple and green on the big 5834 harness. Would you have an idea on what to Check.
Great video. I have a question, I have a 2007 Ford Mustang. Does your company have the same thing for the most part in the video for my car? As well as good quality back up camera and how to I stall properly.
You mean a touchscreen/climate control dash kit? Unfortunately, these are only made for newer models of vehicles
That's awesome, but I would nv have touchscreen ac controls. Do they not make a face plate that has the knobs?
i was thinking that id want to get this...... but maaayyybeee not...
I may have missed it in the video, but is it possible to mount it so the screen is flush?
Same issues in my 2017 Taurus SHO also seems to have a dirty factory signal ...even with my Audison Bit 1 ....
Good job, I put a Pioneer 4400 Nex In my Chevy avalanche and the biggest Problem I had was putting it back in the dash with all the wiring. I was so frustrated i had walk away from it a finish the day.
I'm sure that when you started the video I had a haircut like that of rod stewart ... thanks, I liked the video, it was easy for me to understand your English (I do not speak it, and I read it a little bit more) lazy put the subtitles of the video ... thank you very much sir!
So this is completely plug and play? No reprogramming of anything? I was told going from the little 4" screen to 8" screen with NAV is a nightmare. This seems a WHOLE lot more simple.
Do the steering wheel controls work?
J.C. Brown you obviously didn’t watch the video
Got a question for ya. 2013 f150 had the 4.2 screen i have the metra kit 99-5846b kit. I'm not getting inside and outside temp displaying on the metra display which my original system had, had outside temp not inside. and i'm not able to get the rear cam to my deck instead of my rear view mirror. everything else is working good and pretty happy overall except the price but i get it there's a lot into this kit.
Nice job! Good honest install. Considering this setup for sure. Thanks for posting. Thumbs up!
Thanks John!
Great Video ! Can you guys do a indepth video on the Tuning , Thanks
I'll see if we can squeeze one in!
After preforming this kit to my vehicle I am now hearing static going to that door speakers but it’s stop when the unit is muted or music is paused and ideas or help on this topic ?
Lorenzo you are a pro!
We all start as a hack! Always learning to get better.
Hey brother, the panel looks identical to a 2018 f250. Woult it fir a 2018 F250?
Was the trailer assist system retained?
Can you control heated seats with the metra kit
Kit looks great and thanks for the install video.
:)
If keeping Ford sync? Why install the microphone? If vehicle was equipped with one?
That's what I was thinking. The one that Sony supplied looks like one of those cheap ones that will not allow as clean of sound.
How much is left to make this service change the system to another?
What 13th gen F150 has a column shifter but only sync 2 ? Must be a weird XLT option?
500$ for a dash kit.. the climate control replacement is cool, but it looks cheap compared to stock imo.
thats including kit or just for the work ?
Just used this kit in my install, I really like it
Nice!
What is the reason for retaining sync? Are there certain features that will be lost if you don’t retain it?
Have you done a 2016 GMC Sierra? Stock ratio sucks but it controls everything so not sure I can replace it with aftermarket
I've got one a my 2018 LT no Bose and it's a Kenwood excelon and I have full function. Nav, outside temp, tire pressures, Bluetooth, wireless apple carplay and Android auto.
2018 Silverado that is
Do you have any 1yr reviews on metra
Did you have to use the radio microphone?
Will this work with 8” factory radio replacement
Quality install, nice work and thatnks for keeping the few OOPS moments. Anyone whos installed a car stereo has had theyre share and had to redo or rewire a OOPS.
Looked great, except for the Metra touch screen climate controlls. Personally I would prefer the factory styke controlls.
Thanks Todd! Yea we wanted to change it up and put more of the minor mistakes and moments of trying to figure things out to make it more relatable. Glad you liked it!
@Qualitymobilevideo I see you have 3 red wires connected and 3 black wires connected together. Current installer is not getting the head unit to turn on. Thinking that's the issue. Thx
Does your phone have to mirror everything the radio screen sees? For example can you have texts open on your phone and waze navigating on the head unit at the same time?
Via Carplay/Android Auto it is not a screen mirror. If you do screen mirror, everything will show up, it's a complete mirror of your phone
Hi thanks for the video i put the same unit but i can’t programming the SWC IS I PAIN IN THE NECK FOR ME ANY HELP???
Wheres the video on the hdmi input for phone mirroring?
Can use Metra 99-5834CH with sony ax7000
Can I use this kit in a 2020 model?
No, this will not work for the 2020 model.
Did he show where the other usb/hdmi/ aux cords go for the replacement dual usb/aux/hdmi knockout ?? I mustve missed it if anyone can help.
It so nice to see the mistakes. It takes a real pro to show they are not perfect.
:)
Wish my Pioneer had 2 usb ports like that one has.
What if i just wanted to run the interface and harness cause i have the 2016 lariat 8.0 system without sony , i dont care about the truck info on the radio i just want my leds to change color still on inside my steering wheel controls my sound and back up camera and usbs because i already have 2.. possible? i dont want the dash kit
Don’t dig the HVAC control but nice Sony swap. The OE HVAC is just easier to use on the daily.
Thanks for watching!
I have the factory touch screen in my 2015 f150 is there anyway to get the touch screen climate control and leave the factory radio?
Where did you put the USB for apple car play? Is there a way to keep my factory USB in my car for it?
wouldnt it be nice if ford made it easy like they used to with the double din radios separate from the ac and other craps
Will any double din fit in it? Cause I just
Bought this for my mustang and I bought a double din radio but it’s a 6.8 inch, I didn’t know if it would fit or not
Great install and looks good but that Metra-99 is ridiculously expensive
Yea they are, and they're the only Metra installation kit option available for the Ford F trucks
What if my f150 already has the sync touch screen and I want to replace it with a jvc touch screen what face kit would I need?
do they make a dash kit like this with HVAC LCD screen controls for a 2014 tundra?
Thank you for your video sir big help🙌
You guys any Fort Worth location in Texas ?
Could I do that with my 2012 f150
the joke about the nickelback cd made me chuckle because we bought a 09 f-150 as kind of a beater and there was actually a nickelback cd in it when we got it home
BAHAHAHAHA no way!
I've never installed a mic next to a window because of wind noise ..best place is between rear view mirror and sunviser
agreed. but it is more visible .
will dynamic hitch assist still work?
very clean. hey James are you the silent camera man?
Lol I am!
awesome how to video,,,,million tnx,,,saved me headaches,,,,,,,,,,,,,,,
Great video glad u kept ur mistakes up so I don’t feel bad when I’m doing this, it’s a great help, have you done Chevy Malibu 2015 radio upgrade
Thanks! Yea we wanted to show a little more of the install to show no installation process is perfect no matter how good it is at the end.
Great instructional video!
Thanks Ed!
I'd like a setup like that for my 2013 Ford E 350? I'd like a bigger screen though. Any suggestions?
Check this stereo out: www.qualitymobilevideo.com/xav-ax8000.html
Would that same setup going in a 17 F250
Thats very clean.
👌
Can you reply with a link to a cheaper kit cause 599 is dummy high for a dash kit 😅 I’ll keep my knobs like a peasant 😂
Sorry bud, but newer Ford F-150 models requires these super expensive kits! It sucks I know
Does the backup screen turn to the direction of your wheel like oem?
Doubt it. That's vehicle specific geometry.
In April I bought an F-150 that has this exact trim kit with a Kenwood Touch Screen.
The radio is great but the touch screen AC controls ARE GARBAGE!!! The air only blows cool 50% of the time and now after 5 months of owning the vehicle the AC will not turn off.
The touch screen does not function at all. The only function I have left is airspeed and temperature which are controlled by the buttons on the left side.
Has anyone else encountered this and if so have you found a solution?
Does SYNC still working???
My back up camera only comes out on the small screen how did you get it to show on the actual headunit
What do you mean? You have this dash kit? Is the camera plugged into the backup camera input of the stereo?
Will this fit a 2012 Harley Davidson F150
The stereo will yes! And you have two options for a dash kit for the installation:
www.qualitymobilevideo.com/95-5820b.html
www.qualitymobilevideo.com/95-5820s.html
What kind of type u use?
Would it work on a 2020 f-150
Great install!! I want to know how badly you tore up your Apple Watch?
Not a scratch!
Although, I get that this video was about the installation of the android unit, I think you should have also taken this time to upgrade your tweeter to a better tweeter that has a big and stronger magnet and cone. Just my opinion.
what do you suggest? I have a 15 f150 loaded xlt with the touch screen and sync 2. what upgrades can I do on the cheap to make my system sound good. I don't know car audio stuff at all. I'm also in Canada..
@@alexcockerill Check out the website: crutchfield.com. Plus there's tons of YT videos that describe the what and how's about car audio.
But keep this in mind, the bigger the magnet on the speaker, the better the speaker cone material AND the higher the OHMs on the speaker, will produce the better sounds. But with tweeters, most of the tweeters on the market are 2 ohms (for the cheap tweeters, like in most cars) and then 4 ohms for a slightly better speaker. You'll mostly not need a tweeter at 6 or 8 ohms. But I don't think they make tweeters with these 2 higher spec's. I don't know, maybe they do?
AND if you are considering to upgrade your car audio sounds with an AMP, then the higher the RMS wattage, the better too. That's RMS, NOT PEAK. Some manufacturer state the wattage on the package, but when looking closely, it's PEAK, not RMS, which means the product won't produce the better sound and that the manufacturer was just playing on words with the spec's.
OH and when choosing a speaker and AMP the broader the frequency range spec on the part, the better too. Meaning, some ranges on speakers and AMPs only go from 10,000 hz to 40,000 hz. This is fine, but if you can get a broader range like 4000 hz to 60,000 hz, then customizing your sounds will be better too. Not sure if even this range exists, but was just giving you an example of what I meant in terms of a "broader range", is all.
AND not all "NAME BRAND" products have the best spec's when it comes to audio. Sometimes non-brand products actually can sound better at a cheaper price too, just because of the spec's of the product. SO, always check the spec's of what you're considering to buy, don't go off brand name.
Then once you get your new audio equipment installed into your car, you'll want to perform an audio tune and fine tune your system for the optimal sounds. Placing your highs, mids and lows into the best ranges. Like I said there's plenty of videos on youtube to show you how to do this.
PLEASE SOMEONE TELL ME WHERE HE GOT THE TOUCH SCREEN HVAC CONTROLS!
He states a few times, links it as well, that it comes from Metra, the aftermarket manufacturer.
Lol thanks Murry
So I didn't see a definitive NO, about the pro backup assist. Does it still work?
That is a very important question. The metra kit says it is not compatible with Trailer Assist. That is the only thing stopping me from moving forward.
The Idatalink Maestro kit retains those features
Does that Sony have output to hook up an amp?
Yup the XAV-AX5000 has 3 sets of RCA pre-amp outputs. Here's our full video on it: ruclips.net/video/sVszlitnW-0/видео.html
Can you say spaghetti. Miss the good days wiring harness, plug in antenna and done especially ford with single or double din done.
Do you have a similar set up for a 2015 Ford Taurus sel ?
Unfortunately no :(
not a hard install for sure but id use the pac dash kit part RPK4-FD2201. much better kit and data bus than anything metra can put out. and in most cases its cheaper. i found them for my customers around $380-450.
Why would you keep sync?
How long did that experience take?
A full work day
Do you maintain sirius sat radio with this unit?
Sirius isn't included but it is Sirius XM Ready with the SXV300V1 Tuner: www.qualitymobilevideo.com/sxv300v1.html
Dam things have changed
Does Metra have the same set up for F250?
Yup, this is it: www.qualitymobilevideo.com/99-5849ch.html
03:45 Aw, look at the tiny little screen!
Please tell me they make something like this for a 2010 F150!?
Unfortunately, no. Not with the screen and climate controls :(
@@Qualitymobilevideo dang it!