Чёткое соблюдение размеров, пол напильника в длину, четверть в ширину, линейка, штангенциркуль - не слышал. А уж охрана труда просто на высоте, ни у одного работяги защитных очков нет. И вообще всё станки времён начала СССР. У нас такие в школе стояли. Самое удивительное что им удаётся продавать такой товар.
у нас такие и сейчас много где ещё работают, понятно что коленвалы на них вытачивать вряд ли кто будет а вот точить детали для ремонта техники и на стройку они подходят
Хотел бы я посмотреть на их хирургию_) уже представляю пациент лежит на земле, хирург, на кортах, ковыряется у него в пузе, а рядом на земле лежат ненужные (или нужные) органы_)))
Тоже интересно,... на кой ляд они центра насверлили, если уж 50 раз перезажимают деталь, то хотя бы финальный съем делали бы в центрах. Даже непонятно где база в этой детали?))))
I used to make flange axles for John Deere in the 70's. We were way more advanced even back then, then these guys. Have to wonder how many get injured doing this work.
There's so much double and triple handling in this country. They make more work for themselves than there really needs to be. Not to mention the constant bending they do that isn't required.
MFtractors that were made in UK certainly didn't make any of their machines in this way. This is the way of engineering of the 1800s not in a modern factory.MF equipment is manufactured on some of the best systems and equipment that is available
This is skilled work that I doubt they get paid enough for. They do need safety precautions though, and I'm not just talking about the sneakers. The pile of cooling parts in the street had me screaming.
Se nota hanno fatto tantissimi cambi di lavorazione, è sconveniente a meno che tu non abbia già le tarature segnate ed impostate e faccia solo quello. Si doveva capire solo dal metodo di lavoro. Se nota stranamente hanno utensili porta inserto che, in caso di rottura, gli inserti possono essere sostituiti senza dover ritarare tutto.
Per il resto, se una gola di scarico non è precisa al centesimo e neppure al millimetro non cambia nulla, così come non cambia nulla per il millerighe che in qualsiasi caso lavora solo parzialmente nel foro scanalato e viene registrato, dove serve precisione (non in questo caso sicuramente) con piattello lavorato a specchio e viti di spinta. Fare lavorazioni manuali al centesimo di millimetro su certe cose è solo una perdita di tempo. La flangia esterna di fissaggio per esempio, se ha qualche centesimo in più o in meno non si lamenta, tanto serve solo per fissarla con delle viti.
❤ für einen perfekten Planlauf den Schaft nochmal wenden und in Spannzange oder weichen Backen fertig abschlichten. Für konventionelle Fertigung sonst Top gemacht👏
looks like Old cut up chain from a ship funny but it might be some of the best steel for that application.. as for the machining and lack of hardening after lol
Сделано хорошо и с достаточной для этого точностью. Кондуктор, делительная головка - все что нужно присутствует. Видно что выпуск детали серийный. Ну со скидкой на некоторые моменты. Что тут цепляются до измерительных инструментов непонятно. Для выпуска серии станки можно по упорам настроить и пользоваться только калибрами. Проходит/не проходит. Это бортовой редуктор гусеничного трактора, на всякий случай
Дак если у него станок по упорам настроен, зачем ему линейка? А грязные детали в токарный патрон это норм? Не говорю уже про люфт на шлицах, когда они в конце видео надели шестерню на вал. По факту берут говно и палки и делают из него говно и палки, но другой формы.
Excellent work. This is a team work. My request is that workers must use hand gloves and take other safety precautions while working. Congratulations. God bless you all.
Nah man, if you wear gloves and the gloves get caught in spinning equipment then you can say bye bye to your entire hand, maybe more. No gloves seems counterintuitive but it is the safer option for a lot of this work
By seeing how easily it machines after forging it appears to be low carbon steel. In that section thickness hardening would be next to impossible. Good enough for farm equipment in the third world.
They're using anchor chain that has been cut up from ships that have been scrapped. There is a huge ship breaking industry there. Cheap labor and no environment regulation. Everything you see built in videos like this is out of ship steel of one type or another.
This kind of sweatshop work ain't for me. I'll stick to my air conditioned home watching these guys with a cold Heinekin in my hand ! Or two ,or three ,or............!
If i was the customer I would be disgusted to see how these axle's are just thrown to the floor. On some of them you can clearly see damage on them where they have been thrown to the floor and hit against another axle.
5:14 Why does he hit on the detail? Indeed, after such a knock, one of the flange surfaces (the one adjacent to the spindle) will not be perpendicular to the axis of rotation.
Most warnings on products and machinery because people in Californication are too stupid to understand that hot means hot or drinking drain cleaner can kill you.
I'll be avoiding any massey fergusons from now on! Sod all quality control going on there. Basically a sweat shop, surprised youtube show these videos.
DON UNOS VERDADEROS OBREROS SRTESANOS, AUMQUE INCLUYAN MAQUINARIA... LÀSTIMA RN LAS CONDICIONES EN WUE TRABAJAN... OJALÀ Y DUS SALARIOS ,NO SEAN COMO ESAS CONDICIONES ..SALUDOS AL MUNDO.
Pakistani quality standard ... good for their tractors. hammered installed, non-existent tolerances. after this video no one will buy a replacement of dubious origin.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Чёткое соблюдение размеров, пол напильника в длину, четверть в ширину, линейка, штангенциркуль - не слышал. А уж охрана труда просто на высоте, ни у одного работяги защитных очков нет. И вообще всё станки времён начала СССР. У нас такие в школе стояли. Самое удивительное что им удаётся продавать такой товар.
Раньше в школах, а при путлере нигде.
Ну у них производство свое ни то что у великих стран
И тут хохлы оборванцы отметились....
у нас такие и сейчас много где ещё работают, понятно что коленвалы на них вытачивать вряд ли кто будет а вот точить детали для ремонта техники и на стройку они подходят
Truly amazing low tech process!
Are these old ship anchor chains cut into segments?
Looks like it
Hi welcome to Thailand RUclipsr ❤️💕💕
"Where do you want me to put this part, boss?"
"Awww, just throw it on the floor over there."
они бросают детали как попало на пол после каждого этапа обработки. интересно, наверное это тоже часть технологического процесса.
Haaaa, haaaa... Processo tecnologico... Potenza nucleare... Bomba scoppia in mano.
снятие напряжений в металле
@@Max30k Нормализация внутренних напряжений .
Отпуск метала не важен, главное процесс.
Хотел бы я посмотреть на их хирургию_) уже представляю пациент лежит на земле, хирург, на кортах, ковыряется у него в пузе, а рядом на земле лежат ненужные (или нужные) органы_)))
Интересно какая точность у этой детали, с 6 установок делали и на разных токарных станках!?
Тоже интересно,... на кой ляд они центра насверлили, если уж 50 раз перезажимают деталь, то хотя бы финальный съем делали бы в центрах. Даже непонятно где база в этой детали?))))
@@Dimon__1976 центровка молотком и глазомером
Вас отсутствует измерительных приборов не смутила? Ток линейка и все
@@Dimon__1976 ну чо пристал? Работают мужики, главно шо не пьють!)))
Биение в миллиметр на колесе метр тебя сильно пугает? Это не топфуел им не надо 900, им лишь два по 200 и 500
*professionals in their field)* 🔥👍🏽
Subbed
Be sure you toss all the parts together in big piles, especially after they're machined. Massey and its customers just love that.
Love watching you guys work❤️👍
They get it done! Good job.
At 1:28 the guy tries adjusting the stuck mold block with a hand, from the top, while the hammer is dropping.
I though for certain that his hand was going to look like something out of a cartoon.
Per quello il creatore ci ha dato 2 mani e 10 dita, non è facile perdere tutto in un colpo solo!🤣
@@hasturm1232 I agree.
Импорто замещение ! ...👉 Вперёд к победе капиталистического труда .
У нас так не могут.
Не положено!
@@PeocTaT1 проще купить
БОЛЬШОЙ ПОКЛОН ЭТИМ МАСТЕРОМ! 👍👍👍💪
Some great British lathes in there, Dean Smith and Grace and a couple of Colchester's
ЯМЗ в натуре, поздравляю! Российские инженеры, браво
I used to make flange axles for John Deere in the 70's. We were way more advanced even back then, then these guys. Have to wonder how many get injured doing this work.
That first guy on the lathe, I'm surprised he still has any tooling. Those shavings were past blue!
They are Pakistani ,after 100 years they look same, no improvement
@@anttihuttula6547 5 axis CNC machine could've pumped that out in a few.
@@1one3_Racing парень, у меня стружка фиолетового цвета и искра от резца идёт, это не проблема.
Опоздали на 100 лет, но лучше поздно, чем никогда.
Рузьке глаз узьке сейчас туда как раз отправляются в каменный век ,,, извени Юра мы все проебали ,,,
Ну, они хоть пытаются. Россия вообще сдалась и всё покупает у тех, кто умеет делать.
There's so much double and triple handling in this country. They make more work for themselves than there really needs to be. Not to mention the constant bending they do that isn't required.
These guys are good at their jobs.Just think what they could do with a few minor changes, or MAJOR ones.
friend welcome very nice video
No gloves, no goggles, no problem. These guys are legends.
За перчатки и длинный рукав токаря бьют палками, это опасно для жизни
Looks like a pretty nice piece.
Primitive. Makes me shiver considering where and how some things are made.
Not a drop of lube being used.
Молодцы золотые руки
Very nice👍
Отличная работа.
Great job. Perfect, excellent. And very sad because they don't use eye protection for their eyes let alone their hands.
Olá meu amigo o trabalho e pesado mais tem a parte boa a mercadoria e de primeira vale a pena parabéns pra todos aí 👏👏👏👏
Sensacional guerreiros!! 👍👏👏👏👏
A gt
All this machine work and not a single computer in sight !😳
Amazing, parabéns é muito inspirador os vídeos de vocês para mim aqui no Brasil.
The biggest up-grade for making these axles would be in that 18th century hack saw, a bandsaw is so much faster...........
Bruh, they don't have shoes
They work with what they have, one axle is better than no axle good sir kind sir
Wow! A chamfer tool and indexable lathe tool holders. Both are firsts. Still haven't seen a file or emery cloth.
Abomb79 would shit if he saw this video.
If Massey Ferguson's are made this way, I'd hate to see how Mahindra's are made.
Soft serve Chinese s***
Hahaha
MFtractors that were made in UK certainly didn't make any of their machines in this way. This is the way of engineering of the 1800s not in a modern factory.MF equipment is manufactured on some of the best systems and equipment that is available
@@MichaelOfRohan
This is skilled work that I doubt they get paid enough for. They do need safety precautions though, and I'm not just talking about the sneakers. The pile of cooling parts in the street had me screaming.
Ausgezeichnet 👍👍👍👍👍
Old cut up chain might be some of the best steel for that application
Do they just eye ball the journals on the axel? I did not see a single measurement taken measuring the thickness
after you've done 10,000 of them you can eyeball them
Se nota hanno fatto tantissimi cambi di lavorazione, è sconveniente a meno che tu non abbia già le tarature segnate ed impostate e faccia solo quello. Si doveva capire solo dal metodo di lavoro. Se nota stranamente hanno utensili porta inserto che, in caso di rottura, gli inserti possono essere sostituiti senza dover ritarare tutto.
Per il resto, se una gola di scarico non è precisa al centesimo e neppure al millimetro non cambia nulla, così come non cambia nulla per il millerighe che in qualsiasi caso lavora solo parzialmente nel foro scanalato e viene registrato, dove serve precisione (non in questo caso sicuramente) con piattello lavorato a specchio e viti di spinta. Fare lavorazioni manuali al centesimo di millimetro su certe cose è solo una perdita di tempo. La flangia esterna di fissaggio per esempio, se ha qualche centesimo in più o in meno non si lamenta, tanto serve solo per fissarla con delle viti.
@Nomen Clature The use an Eyecrometer.
@@hasturm1232 "Calibrating"??🤣🤣
1:28 так мило)хотел рукой подержать🤣
There is no tolerance at all. I thought I could not be shocked more but then I saw them using that high quality cutting water
NO cool mist mixture in the water?
I couldn't believe they had water at all. Those guy like it rough and dry.
Dromos B soluble oil should of been mixed with the water.
When you spend it all on machinery but forgot to make a concrete flooring...
Couldn't throw it on the floor with concrete.
@@covinaca5312 Yes, the thought crossed my mind to that also.
My workshop base is concrete, with 3/4" shuttering ply on the surface. If I drop something, it dents the floor, not the part.
You'r wrong - what you see is 2.floor.
Move this piles of dirt and you'll find 1. floor cemented.
Concrete explodes when exposed to very high heat in one spot
Good 👍
Maa Syaa Allah teman Semoga sukses pekerjaannya
Хорошая отлаженная работа
Amazing...
Very impressive 👍
Bare earth floor provide natural cushion for parts and cool the work area
❤ für einen perfekten Planlauf den Schaft nochmal wenden und in Spannzange oder weichen Backen fertig abschlichten.
Für konventionelle Fertigung sonst Top gemacht👏
Yeah that looks completely safe. What could possibly go wrong........
OSHA would have a field day at this factory. No one wearing safety glasses, open toe sandals, loose clothing, no covers on rotating parts of machines.
I noticed they leave chuck keys in their machines. That's a big NO where I work.
@@gabrielharper8403 ключ фигня, вот когда шпиндель по цеху летит тогда страшно
Приятно смотреть.
"Can you remove the guards from these machines so we can film the process?" "What is guard my friend?"
Nice Work 👍👍👍👍
My grandfather had one of those old reciprocating hacksaws in his machine shop. I thought that everybody used band saws nowadays.
No...they are still very common in fabrication shops etc. but indeed band saws are more the norm now. As well as circulair saws.
"Ship me another half shaft will you. For some reason these keep breaking"
Mo has always given my the full shaft if I request it. These metals are a specific combination for heat reduction, balance and strength.
looks like Old cut up chain from a ship funny but it might be some of the best steel for that application.. as for the machining and lack of hardening after lol
Я увидел резцы со сменными пластинками!!!
Aftermarket OEM quality right there lol
As good or better than OEM.
What would the World do WITHOUT America to buy all the products the world makes so cheaply?
No thermal heat resistant suits and goggles here folks...just good old-fashioned sweat and muscle.
It’s dirty job. Every process they throw out products on ground, it’s not professional.
I don’t purchase products comes from this king of factory.
All that lathe work and no micrometer? How do you know if they are in spec?
И никакой тебе охраны труда!!!!))))
Великолепно!!!
Рукав по локоть, ТБ видимо палками выписывают
Пролетарии всех стран обьединяйтесь ,а так молодцы труд он везде труд.
Сделано хорошо и с достаточной для этого точностью. Кондуктор, делительная головка - все что нужно присутствует. Видно что выпуск детали серийный. Ну со скидкой на некоторые моменты. Что тут цепляются до измерительных инструментов непонятно. Для выпуска серии станки можно по упорам настроить и пользоваться только калибрами. Проходит/не проходит. Это бортовой редуктор гусеничного трактора, на всякий случай
Дак если у него станок по упорам настроен, зачем ему линейка? А грязные детали в токарный патрон это норм? Не говорю уже про люфт на шлицах, когда они в конце видео надели шестерню на вал. По факту берут говно и палки и делают из него говно и палки, но другой формы.
Excellent work. This is a team work.
My request is that workers must use hand gloves and take other safety precautions while working. Congratulations. God bless you all.
Nah man, if you wear gloves and the gloves get caught in spinning equipment then you can say bye bye to your entire hand, maybe more. No gloves seems counterintuitive but it is the safer option for a lot of this work
Окалина попавшая на перчатку сделает ожог тогда как от кожи она отлетает. На станке по ТБ ни рукавов ни перчаток иначе намотает
The only thing that makes me cringe is how they work in a shop while wearing sandals
Hand operated machines not sandal operated
@@mkkhalid23 nothing ever dropped in shop , right?
Curious about the alloy and if the scrap they use is as strong as if it were made new.
By seeing how easily it machines after forging it appears to be low carbon steel. In that section thickness hardening would be next to impossible. Good enough for farm equipment in the third world.
They're using anchor chain that has been cut up from ships that have been scrapped. There is a huge ship breaking industry there. Cheap labor and no environment regulation. Everything you see built in videos like this is out of ship steel of one type or another.
@@RustyorBroken What about heat treatment unless the material spec is ensured ?
@@narasimhamurthytn2020 it is already in-spec, otherwise they will paint it.
@Nomen Clature сталь инструментальная судя по стружке, не хуже ст45, для данной детали подойдёт.
Nice video
I'm not a machinist but grew up in a family of machinists... that tool chatter hurt my soul.
"Thats really cool man, what depth of cut are you running?"
Strange man: क्या?
برافو عليكم ممتاز جدا ماشاء الله عليكم
Never mind that it's made out of an old anchor chain, which is totally the wrong alloy for this application.
Why not? Play-doh is also a kind of material.. for the purpose.
Ты сопромат то изучи знаток )
@Nomen Clature погни мне цепь якоря, давно мечтаю
👏👏👏👌👌👌👍👍👍
Bronze age level of manufacturing...
В Европе да.... Кизяк жечь скоро будут
Класс молодцы
This kind of sweatshop work ain't for me. I'll stick to my air conditioned home watching these guys with a cold Heinekin in my hand ! Or two ,or three ,or............!
If i was the customer I would be disgusted to see how these axle's are just thrown to the floor. On some of them you can clearly see damage on them where they have been thrown to the floor and hit against another axle.
I thought the same thing. Spend all kinds of time machining it,...& the throw it on the ground.
И что?
Вы ещё не видели как делают колбасу для вашего стола...
I think it's okay because the final machining is still to come
Don't worry man they also don't want to sell it to you
After Forging where is the Annealing & Quenching Process for increasing hardness 😅
Сначала токарная обработка, закалённое резец не каждый режет
А станки остались от колонизаторов....
That's when they were good machines. Now it's all garbage.
Nie no zawiodłem się... Gdzie nieśmiertelne klapki na nogach???
Does this video make you more -- or less -- inclined to purchase a Massey Ferguson tractor?
They do a great job then throw it in the dirt.
5:14 Why does he hit on the detail? Indeed, after such a knock, one of the flange surfaces (the one adjacent to the spindle) will not be perpendicular to the axis of rotation.
Good workers!
Wouldn't find employment in my business !!
After a long day at work, they hear someone knocking on their door all night long
Как на планете Татуин...
👌👌👌💪👍
Что я смотрю как как ска как неразу непомерить и я считаю это фиаско
Hot metal dumped outside, no safety sign. Somebody can get hurt by touching it. Need a sign saying “Hot metal, keep out”. Good video though.
Most warnings on products and machinery because people in Californication are too stupid to understand that hot means hot or drinking drain cleaner can kill you.
No need for any signs - there were none who can read it.
Surely as you approach you will feed the radiant heat, plus why touch what does not belong to you?
We're idiot here there people can't afford to get hurt.
Not many lawyers
No eye protection 🤓 and no steel toecapped boots!!! The injury rate must be very high in this environment.
Made in Usa that town in Pakistan !!
8:10, somebody get this kid some boots...just when one thinks nowhere is worse then a Florida job shop, there is this...
In Pakistan all we care is to give shape of the products and make money. Quality and ethics is something totally tabu.
0:00 Ship anchor chain, cut in quarters.
Bhai ya video Daska sy record ki ha ?
I'll be avoiding any massey fergusons from now on!
Sod all quality control going on there.
Basically a sweat shop, surprised youtube show these videos.
And that is the way it was in the United States back in the fifties no editorials or anything like that just the way it was.
America in the '50's was 1000 times more advanced then this...
DON UNOS VERDADEROS OBREROS SRTESANOS, AUMQUE INCLUYAN MAQUINARIA... LÀSTIMA RN LAS CONDICIONES EN WUE TRABAJAN... OJALÀ Y DUS SALARIOS ,NO SEAN COMO ESAS CONDICIONES ..SALUDOS AL MUNDO.
Хочется верить что Россия до такого не докатится
Pakistani quality standard ... good for their tractors. hammered installed, non-existent tolerances. after this video no one will buy a replacement of dubious origin.
Wuau 👍👍👍