Car Door Cracks When Opening | Door Check strap Repair
HTML-код
- Опубликовано: 10 апр 2020
- Popping sound when I swing my car door | how to fix a snapping door stop
💡 Don't forget to subscribe and hit that bell 🔔 to learn more about looking after your car:
ruclips.net/channel/UC-C_1iVg...
💚 If you got some VALUE from this video, PLEASE give it a ‘like’ and maybe consider showing your appreciation by buying me a coffee: paypal.me/cyclonecyd
Learn more about looking after your car:
🎥 Crank sensor failure is such a common issue. Learn to recognise the symptoms:
• CRANK Position Sensor ...
🎥 How to replace a CV [constant velocity] joint boot with a split kit:
• Universal CV Boot Repa...
🎥 Don’t let your fuel filter end up like this:
• Why Should I Change My...
Everyone should have a tyre pressure gauge in their glovebox:
bit.ly/Tyre_press_guage
bit.ly/Pressure_Gauge_2
I personally prefer a stirrup pump to a foot pump (I use the same one for my bikes and cars)
bit.ly/Tyre_stirrup_pump
If you’d like to learn about the science and engineering of cars:
Bosch Automotive Handbook: amzn.to/39va9xA
Thank you 
Авто/Мото
🎥 Crank sensor failure is such a common issue. Learn to recognise the symptoms:
ruclips.net/video/iLKOqCS67xM/видео.html
🎥 Don’t let your fuel filter end up like this:
ruclips.net/video/8aZLTbG993Y/видео.html
I want to say THANK YOU. This video saved me a $150 diagnosed plus the cost to repair doior from kia dealership. I have a 2020 kia telluride and I fixed my door in 60 seconds by simply tightening the screw.
You're welcome
Sir, hello from Alaska! That’s exactly what the problem was, and it took five seconds to fix! Thank you very Much!
👍👍👍
Really simple hack to a horrible noise. Thanks CYD for the simple fix.👍👍
You're welcome Shivang
This is good advice - a small matter that's often overlooked by people who think they have a bigger issue. My car door has been making this exact same noise. I just googled this video and then went out to my car door, and tightened up the screw. Instantly my car door is 99% quieter while opening/shutting it. Wasn't the check strap or anything else... just literally a loose screw/pin.
Yeah, it's 'bark' is far worse than it's 'bite'
Wow yet another thing that I didn't have any clue how to fix. I love your videos, so many common problems that nobody ever talks about.
Thanks Liam. That's exactly the USP I'm trying to cultivate.
Great video! Saab 9-3 '04 owner here. Video saved me a trip to the shop with an easy fix. Good stuff!
Great to hear! Easily missed this 🎓
After door being harshly blown open experienced exactly the 3 cracks every time opened or closed driver door, tightening that bolt did the trick - all fixed up! Thankyou for posting - saves me a trip to dealership with potentially infecting waiting room!
Thanks for sharing
Cyclone Cyd - you done it again!
My Aygo has just started doing this in the last 10 days on the driver's side. From your video I now know what to look at tomorrow and have a go at fixing it - many thanks 👍
Did you find the problem? Did the video help? The River Mersey runs through Stretford, not far from Davyhulme where I was born and Timperley where I grew up from 6.
THANK YOUUUUU this has been driving me absolutely crazy since I bought my old problem girl lol
You, sir, are a life saver.
My lexus Ls400 had that problem with the right passenger door and it stopped, thanks to you!
Awesome. Thanks for letting us know
Have a word with any regular passengers, mine was down to the door being thrown open all the time, just an idea! :)
Cyclone Cyd is amazing! It was indeed an "easy peasy" fix!!
Thank you, much appreciated.
You my friend are a legend!
Sorted it with an Alan key the right size!
One of those issues that sounds much worse than it is (initially anyway, left alone something will break eventually)
Thank you! I have this problem for two days. I'll try to fix by myself tomorrow.
Hey Cyd. Thanks so much for your helpful videos. Wondering if you have any ideas for a door that got flung open in the wind. Now it pops when I just open in a few inches, no real pop when closing. Any ideas?
Perfect! It worked! Thank you so much. You saved me a trip.
Great to hear!
My wife's car does this all the time, only when I started to question why I noticed when she opens the door (we live on a steep drive) she throws the door open putting massive strain on the check arm and fixing. £10 socket and a word in her ear and all fixed however I feel like this will only happen again as remember her having same issue on other cars and passenger side on mine. Usually this is because it has worked free but remember just sometimes it is down to driver error! :)
Great video! Have Liked & Subscribed!
Last week this cracking sound started on my Citroen Cactus and first thoughts were of faults inside the door and some internet searches said the same. Fortunately, I found your video on YT. My bolts to the A pillar were solid but the 2 nuts recessed in the door frame were over a turn loose. They are recessed and not easy to see but a 10 mm socket fed in easily. A 2 minute job - I am so pleased! Thank You.
Thanks for the sub! Welcome aboard
DS4 owner here, same sound started coming from my door as well and WD-40 didn't help. My A pillar bolts are also not loose, so I was wondering what it might be. I guess I will check the others hidden in the door frame and hopefully they are not that big of a pain to reach.
Same on Citroen C4 second generation hatchback, driver door.
Brilliant video, just fixed the door on my car with no problems at all
awesome
Thanks for your video so helpful saw the bracket move slightly tightened it up fantastic .Vauxhall corsa. Thanks
The brackets barely have to move for the arms spring action to cause this kind of 'cracking' noise
Just earned a sub. Thanks mate.
Thanks for the sub! Welcome aboard. I hope there are other videos of interest for you.
Thank you so much, video was really helpful...I have 1996 Rover 600
Glad it helped. I'm ex Rover Door Sytems Engineering❗ and I had a 96 800 Vitesse Sport in Nightfire for 10 years.
Thank you🎉
Great advice
Thanks for the video I will do this to my citroen! Random question on another note, but do you live in a Bryant homes estate? :D
Useful information 👌
Stay connected. Thanks Sandeep
Thank you Cyd! Ciao!
Stay safe. Ciao
Thank you!
Thank you! That was perfect!
Happy to help
Thanks! mine was loose nuts on the door side. Very helpful video!
Great to hear!
Tried oiling the hinges but made no difference. Googled the problem and found this fix and sure enough the nut was loose.
Quick fix, thanks for sharing
thank you just got a newer ford and hopeful its covererd thank for makinbg this video bud , have a great day yippee yahoo
Thanks, you too!
Thank you so much, this was my issue as well 😎
Glad it helped
Legend 🎉
Love the helicopter rotor sound close by where you live... must be a constant pain lol... im joking. Good video.
Nice 👍
My 2008 mini Cooper started making this sound out of blue. And whenever i tried to Open the door more than one pin it feels like im gonna break it off. Can it be because of loose screws as well? Because when i looked at the body screws they were fine. The movement is happening inside the door.
Just that easy. Wow!
Ha ha, I know, it sounds loads worse than it is
This was annoying the hell out of me on my Navara, now fixed but the bolts were on the door side....thanks :-)
wow. fixed. thanks
Excellent, thanks for your feedback Mark.
Thanks for posting another helpful video. Might be a good idea to go around the other doors on the car and check their fasteners are up to torque?
Hi Ray, yes indeed. I actually loosened the screws to engineer this problem, but you are quite correct, check all the doors while you're at it. It's a common problem on loads of cars and I have actually known people strip their doors down to change check arms when this was the problem.
Exactly what I did...
Thanks m8!
👍👍
In my mustang, it was the door hinge bushing, a cylindrical part that's around the pivot on the bottom hinge that kept making a loud creak. From what I understand, it's supposed to rotate freely, when brand new, but over time it may become stuck, and the hinge starts filing away at its side. I was troubleshooting something completely different and sprayed all the hinges with silicon spray. It loosened that bushing! And since it's worn and no longer round, it now catches and makes a horrible sound! I put some thick grease around it, and it sort of helps, but it needs to be replaced. So there you go! SN 95 mustang.
Is it a little 'top hat' bush made of a sort of fibrous material with what look like threads of brass running through?
I wish this fixed mine :( Mine is the strap. It's made of steel and has developed a ledge that catches and pops. As far as I can tell, it has to be replaced. Only problem is Isuzu hasn't made my vehicle in 20 years and there are no replacement parts. Every one of these vehicles door straps pop in the front. It does appear that they used the same straps in the front and back, and a lot of the back doors don't pop on these. I'm going to try to put back straps in the front, then I'll let you know if it works. The simplest and cheapest option if to unpin the strap, push it inside the door and then use a piece of nylon band(like a piece of a ratchet strap cord) to attach the door to the pillar. You lose the intermediate catches but at least the pillar won't twist if the door opens too hard. Jeep used this method for decades on the Wrangler.
Outstanding as always mate. Kind regards Mike c1 owner!!
Thanks Mike, did you see my follow up on the C1 split airbox?
ruclips.net/video/KM_YYvbOr7A/видео.html
@@CycloneCyd yes. Very imformative ta. Water leaks where the. bain of my life, until. I watched your video, s. Still very small leak. Kind regards Mike. Norfolk.
@@mikesaul8711 have a look at my Saab 9-3 boot leaks video. See ow I seal the seal carrier to the flange - do this on your C1 tailgate seal and door seals. Let me know how you get on
@@CycloneCyd will do Cyd . Many thanks as always. Mike. Norfolk.
I have the same problem with opel astra h.
I have to screw the bolt only? Thank you very much
You're welcome.
I have a similar issue with my 1988 e class, the driver side door makes a loud snap sound when I open it to a certain degree. I've tried looking at what might cause it and notice that the arm suddenly moves up or down when the sound occurs
Thanks
Welcome
thanks great advice though would say check the spec on the torque before just going hell to leather on tightening
Good tip! especially for novice DIYers
Otherwise known as 'FT'
Strange because I tightened mine because I noticed they were loose and the sound started.
Perhaps the checkarm is worn and needs replaced
Mine cracks like this but the outside panel moves away from the glass. How do i fix this
the guy has a look of kirk/ out of randel and kirk
👍👍
ment randel and hopkirk lol
It's okay, gibberish is my second language
Do you have a Tech 2 scanner?
No. For generic engine related codes I use Torque Pro
@@CycloneCyd Is it good enough for saab? Alot of people say Tech 2 is a must for saab owners. My car is in limited performance mode. Its a 1.9 tid 2008 vector sport. Would that torque pro find all the problems?
I tried tightening it, it just wouldn't budge. Do i need a special torque wrench instead of an electric screwdriver with the correct bit?
An ordinary 1/2 inch ratchet will do just fine. An electric screwdriver is unlikley to be strong enough.
What needs to be addressed is the poor design of the friction surface in these check stays. I had a dealer that sold me a ACR30R Previa whose driver's stay failed and I pressed for him to replace it under warranty. The new stay lasted exactly twelve months. Money spinner!
This design has been around since at least the 1950s and has ALWAYS been cheap-and-cheerful (actually, shocking), and I have owned half-a-dozen cars with it. I put golden syrup on mine for stickness (my stays are tight) rather than spend a fortune replacing them. If the stay makes a cracking noise in the sun, I know the syrup is working. If not, more syrup, lol.
I'm not familiar with the Previa, but our C1 has a cheap-shit Toyota designed check arm too. The Saab ones are really good.
Unfortunately in my case there is a problem with those inner plastics.
Inner plastics?? Do you mean the plastic coating on the check arm?
Mine keeps doing it and I've tightened it aswell
The little pivot point rivet might be worn.
Seems to be coming from the part coming out of the door so will try tightening it again
Maybe you need a new door checker then. Door casing off job.
Wow I just fixed my car in 30 seconds with only my fingers
It didn't work for me. The problem persists.
It may well be the pin at the bracket then. If it's never cleaned and lubed it will wear and produce the same sort of noise. You could drill the pin out and replace with a short bolt.
@@CycloneCyd That's it, I have figured it out on my own. Thanks :)
Thank you!
You're welcome!