Audi Q7 Suspension Fault 01772, 01400, 01583
HTML-код
- Опубликовано: 10 май 2020
- Join our community for invested professionals at www.simplydiag.net
Don't forget to Subscribe, comment and hit the notification bell :)
Support the channel:
paypal.me/simplydiagnostics
SimplyDiag/
Twitter / picoflu
email for video enquiries: info@simplydiag.co.uk
email for business enquiries: info@simplydiag.net
Artimini available from www.diagnosticconnections.co.uk
Technical information supplied and used under authorisation from www.app.alldata.com
Thanks for watching :)
Steve
* Disclaimer: Neither Simply Diagnostics nor Steve Scott accept any liability for any loss, injury or damage to any person, property or vehicle as a result of techniques, tools or methods shown on this channel. Always follow the manufacturers instructions and abide by all local and national laws regarding safe working and environmental hazards* 
Авто/Мото
Yet again another super diag session from legendary Steve Scott , you have made me love my job more and more everyday, thank you for great educational video
Thank you Steve. Have a blessed and safe week to you and your family.
Another great video by the happiest diagnostician on the internet
Living the dream Steve. 👍
Thanks once again for another interesting video. You make learning a lot easier.
A good system breakdown and ensuring the single wire is capable of carrying the signal, interesting to see if you have a leak or internal fault
Great work
Just in time this case study! working on a 2006 bentley continental gt with the same faults... my gess is a bad compressor....
Will be nice to see the outcome! Thanks for your great videos! Chears from Quebec Canada!
Watch Hoovies videos of his continental. It totaled its self sitting there in electrical repairs. Great lookin cars and I'm hoping the best for youm
Thank your mr.Steve this is helping so much can’t find any info here I’m the states to figure this out!!
Nice video! Subscribed.
Great video. 1 question. Do you know reprograming control camera module for audi a8 2011? Thx
First.....HOT COFFEE! You need a garage. Even if it's not heated for work use, it helps!
I don't see many Audi's here in California. I've seen older Lincoln's with Air Ride. Good diag, now to locate the culprit!
Thx for this great video 👍. 1 question... I change my suspension and i have a problem. The problem is. When start the car in the screen show the yellow light and a couple min, show the red light. Do you have idea whats the problem? Thx
Hi great video am after bit help mate I’ve got a q7 2008 tdi 3.0
I’ve have a nock clunk noise from front end drivers side.I’ve changed lower arm upper wishbone and track rod ball joint and drop link and am still getting a clunk going over bumps it sometime rattles like metal on metal?? Any help in right direction would be appreciated
Like the banana plug on ya test light 👍👍top job
did you find the fault and fix it think i might have the same prob but both lights on
Nice
Good jub👍👍👍👍👍
Great video as always steve. Just reading others comments...so is it safe to have my led test light that pulls 10mA connected to battery positive to test a signal wire and then look at the reading on scannner?
Yes mate, obviously that's my opinion and I take no responsibility for you letting the smoke out if you get it wrong 🤣
@@SimplyDiagnostics okay. Can you make a small video showing testing of 5v circuits showing you putting 12+ to the ecu and it showing the results etc would be great
Any concerns with using the test light on battery + at 12v to test the signal of a 5v sensor? Another great video 👍🏻
Not with mine, it pulls 150mA inrush, 120mA constant.
Never doubted you, just wasn’t sure how it worked being 12v instead of 5v, will be more confident using that method now 👍🏻
Check the current draw of the testlight before using this method Ross 👍
I’ve got an OTC on order from America but I’ll check what my cheap eBay light draws in the meantime, what would you say is a safe limit? Cheers
No more than 150mA, if there's any doubt then you can use an LED testlight which should draw between 5 to 20mA
hi steve which scanner are you using at the start of the video ? paul
Topdon Artimini as stated in the video mate, link to purchase in video description. Hope this helps 👍
Hi mate do you do work up west Yorkshire it's luke at s&j vehicle services having a very similar problem
👍
Cooler that than a penguins snow globe
You could pick the weeds from under there.😂
Hi mate, what scanner tool/app are you using?
It would have been the artimini from Topdon, link in the video description 👍
Thanks bud, evidently I'm being blind over here
80 degrees here:)
Come warm up your blood
Thank you for the videos
هاي ياريس مافي شرح عبربي انا بشتغل كهرباء واريد ان تعلم من شغلك😢👍👍👍👍
Get your hands dirty when it's grey and cold is more difficult, you'll need some bacon!
Mate whats that scanner called
Topdon Artimini, I tell you in the video and there's a link in the description 👍
@@SimplyDiagnostics cheers i dident heat tat sound👍
No worries, reading back, I was a bit sharp, apologies for that.
1:47 Sexual healing
Slightly concerned about what CD is playing!!! Lol.
Never noticed tbh? What was it? I turn the volume down before filming so I don't get a copyright strike 🤣
CD 6 Sexual!?
🤣🤣🤣 definitely not mine open.spotify.com/playlist/1mBuUioXQDniCYKdHAXwwh?si=rg5iyj8_RVmdQecR2gYS7g