Trying ghost pigments in my resin coasters!!!!! Video #61
HTML-код
- Опубликовано: 1 окт 2024
- The product's that I used in this video are:
Enviro tec lite resin mixes 8oz for the top and 6oz for the bottom
Casting craft opaque pigment white 9 drops in 1.5oz of resin
Black diamond pigment sapphire ghost blue 1/8 tsp added to the above mixture
Blue mini confetti tubes 1tsp with resin
DecoArt Americana decor Metallics Deep Sapphire
Recollection Chunky Glitter Marine blue
***********************************************
Here is the link to my Amazon store.
Canadian
www.amazon.ca/...
USA www.amazon.com...
***********************************************
So gorgeous. Being stuck at home I'm binge watching so many new ideas (for me). I want to try everything, lol.
Thanks so much and thanks for watching 🥰 would love to see what you make 🥰🇨🇦
Me too. Lol. Ive seen so many new and cool things
me too, I buy all the stuff I would need then I never end up doing it. if I do its weeks later. lol
tip from one artist to another: try using plastic bottles with little nozzle caps- they come in all different sizes and when youre done you just remove the caps turn them upside down and let the resin drip out, and peel it out after it has cured then you can reuse them and you wont be using and throwing away so many plastic bags. beautiful effect by the way!
Thanks so much and yes I have ordered some silicone cups I do have some of the little squeeze bottles I will have to try that thanks so much and thanks for watching 🥰🇨🇦
I just found this channel and I am loving it. But I have a question (I am new at this so maybe a stupid question) - why do you remove the top (with the white flower) and then add it back later? Why not just pour the blue glitter on top of the first piece after it is cured?
Thanks so much. Well I quit using this mold because it was leave a rim/lip so when I was trying this method I thought if I turned it over I then have 2 good sides and NO lip lol I now alot of work hahahaha but love the end results. Thanks so much for watching 🥰🇨🇦
So pretty...
I was able to pick up a few containers of resin at Michael's. Try searching up resin specifically but if not try your local home depot I found resin there as well. Love your work🥰
Thanks sooooo much I'm glad you found some..... Have fun creating 😍🇨🇦
I know you were not sure what you did different with the blue ones.... the hole was a little bit larger because the circles are a little bit wider.
Thanks yes I think your right. Thanks so much and thanks for watching 🇨🇦🥰🥰🥰
Sherry you let ur Resin sit a bit B4 adding the pigments? the reason I ask so far I been using Epoxy resin from UV Resin and I really Like Epoxy Resin better, but I been using my 24mm and some 20mm Ball Orb Mold i been trying Alcohol Inks the Lets Resin Inks nag they hardly give and effects for me, but Pinata yes are good, but the Ink when I drop in in my resin gives this running effects mainly on the sides not even being able to see the center on the orb, I saw many videos and they get some gorgeous effects. Now I do rush and drop my inks right after I add my Resin in, and my thoughts tell me maybe I should wait 15-20 minutes when I add my resin in my orb's or juz let it sit for that long so the inks won't fall and run down the sides to fast, thas my Theory at least maybe wrong, well hopefully you can help my love my runny inks LoL and Ur pieces came out sooooo Beautifully Muah Lovely😘 hope you can give me Advice TY 4 got to add sherry whats the work time of the resin Ur using?
Thanks so much and thanks for. Yes from my experience with alcohol in when you drop it in right away it will spread if you do wait a bit they will not spread as much. Hope this answered your question. Have fun creating 🥰🥰🥰🥰🥰🇨🇦
@@SherryMoulton : thank you Sherry, it sure did answer my question Deary😊 don't get offended me saying dear, I'm an older fella all out of respect, i'' still astonished of Ur work you did really stands out you know when you add a picture to ur video just an eye-catcher or it will make you look twice. forgot to ask after I mix it and in case there are bubbles i leave it sitting for 5-10 minutes, How much longer should I let it sit after the 5-10 minutes? you know I thought Exopy Resin have longer work time or pot life, but mostly some Resins have 20-40 minute work time B4 it starts getting gel like I thought one had hours to work, really new to Epoxy Resin used UV Resin for a bit, but Epxoy Resing is much better despite the long cure wait its worth it.
When I clicked on this video, I had no idea that it was one of your earlier tapes. After listening to it for a few minutes, I realized that it was, the famous, SHERRY MOULTON! I have the ability to remember faces and voices, but not names. So, in that way, Sherry, I'm special too. I've followed you for a year+. Love your videos. Sorry to hear of your husband and your deep freeze. I'm sure you'll make a ver cool 'cup' holder for your hubby.
I never played with epoxy. This video was recommended to me. I guess because I make soaps and such. Now I’m interested in other projects. 😩I’m crying because my house isn’t big enough for me and my experiments.
Hahahaha I know the feeling to many things not enough room, time and of course money lol. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦
What name is the glitter to match the fire opal please
Thanks sooooo much and thanks for watching. The glitter is Martha Stewart Confetti glitter color fire opal. Now this was bought at Micheals Canada. 🥰🥰🥰🇨🇦
Beautiful! Cool technique.
Love this technique, and now I'm thinking a snowflake pattern in the white with the interference in it would be to die for!
Thanks sooooo much 🥰 I'm just in love with these even with all my miss happenings hahahahaha 🥰🇨🇦
These are GORGEOUS (per usual with your coasters!)! I have a quick question...you stated you put a tbsp of blue glitter in with the resin but list it as tsp, is it actually a tsp? (Just FYI....it’s pronounced reck-ollections, not ree-collections 😊)
That is amazing that you can put a cured piece inside a non cured piece and the meld together like one!!! super cool!
Thanks so much and thanks for watching 🥰 I thought it turned out pretty good 🥰🇨🇦
Omg 😳 luk so Amazing ❤️👌🏻Waoooo
Plz plz can u explain for Beginners. What we need & How many resin I mean measurements.
In another video you mentioned that the reason you got such a beautiful flower effect this time is probably because you heated the resin, how much did you heat it and for how long?
Thanks sooooo much and thanks for watching. Yes actually it has to do with leaving your resin set for a bit. I now leave my resin set for 15 min before I start piping the white and it makes a huge difference. Once its piped you can use the heat gun to move it around but not for long. Hope this helps 🥰🥰🥰🇨🇦
Sherry Moulton thank you!!
Hi sherry
is that a tourch or a blow dryer?
This is a heat gun . Thanks so much and thanks for watching. 🥰🥰🥰🇨🇦
I just found your channel and I’m loving your work!!! So beautiful these coasters 😍😍😍
Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦
Thank you, I loved this video! They all are beautiful so honey, stop being so hard on yourself. The ghost pigment was a great idea!
Beautiful! Was wondering, why not just do the blue layer first, let it cure and do NOT remove from molds. Then pour the clear/white/blue flower layer directly on top and let it cure, then remove from mold?
Could u please help me? When i pour white resin like a flower then after aome time whole white settles down at bottom and there is no 3d effect like yours.. what may be the reason?
Thanks sooooo much for watching 🥰 Yes I've also been having issues. I've discovered when my resin is cold it does not work as well. So today I did another set and I warmed my resin first and it worked . Also I found when it was gone to long it didn't turn out either. Hope this help's 🥰🇨🇦
I Love watching and listening to your videos!
You are GREAT. 😻😻❤
They are beautiful. I can't buy Castin' Craft in England but I'm using alternative pigment pastes..trial and error - I won't give up until I get it right x
Wow just watched your channel for the first time. Oh yes! Gotta try this! You must be my long lost sister! 🌞❤️
Thanks so much and thanks for watching 🥰 lol well hello sister 😍
If some of the bottom gets onto the top, do you sand it off?
Thanks sooooo much and thanks for watching. Yes you can sand it off. 🥰🥰🥰🇨🇦
Hello, I loved your video and I found your superb coaster 💞 I have a question I live in Quebec Canada is there another product that I could find here to replace casting craft opaque white pigment ? thank you and i will continue to learn some tricks with you! thanks 💕
🤩👏🏾👏🏾👏🏾👏🏾 just watching and realized “how am I not subscribed to this chic??” I have now rectified that.
Lol welcome to my special world lol. Thanks so much and thanks for watching and subscribing 🥰🥰🥰🥰🥰🇨🇦
Hi Sherry, I am loving that you use a lot of canadian products. Have you tried the mica powders or pigments from Windsor plywood. The few that i have used are awesome!
Hi Sherry. Why did you take the flowers out of the mold vs pouring the blue onto? Thanks!
Love watching your videos. Thanks for sharing. Every time I try these I get an air bubble between the two layers. I press them down just a little - not too much. I swish them around. If my touch is to heavy the bottom layer comes up over the edges and I have a mess. Any tips or suggestions?
Boo... tried buying from your Amazon store but they don’t ship here in Cali! 😢
Put some charcoal in your freezer and basement it will absorb Oder's. Love the coasters
Thanks so much smell is gone thanks goodness 🤮🤣🥰 Thanks so much and thanks for watching 🥰🥰🥰🇨🇦
Love your video and your work
Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦
For your husband's pudding cup thing you are making use a rubber or silicone it will grip the cup better, maybe it is just a thought.
Hi, thank you for the video. Im trying to do the same design as you did here. However having issues with the white resin. A little while after the design is completed, the white resin sinks and all the design blends together. Any tips on how to avoid this from happening?.
I think try sucksion cups
Thanks so much and thanks for watching 🥰 will have to give that a try🥰🇨🇦
Just found your channel. Those coasters are beautiful. The interference or ghost colors are fun to work with. I find they show up better on a darker background, like that gorgeous blue you have.
Thanks so much and thanks for watching 🥰 yes I'm excited to play this them a little more 🥰🇨🇦
Looks wonderful, but why not take yellow or Orange for the inside of the flower? Now the inside of the flower falls away becouse the outsider is the same color?
So pretty Sherry !!! Like always ! 👏👏🤩👏👏👏😍🖼💫👏👏🕊👩🎨😘
Thanks soooo much 🥰 Happy Easter 🐇🐰🐇🐰
Hi sherry I love your video and I am happy I found you .would you please tell me what glitter you used in the center of flower ? I try to find in Michaels but I did not find it .
Thanks so much I'm glad that you found me🥰🥰 the glitter in the center is called confetti tubes now I got these ones at the Dollarama here in Canada . I know that micheals sells them but not sure about the colours. Thanks so much for watching 🥰🥰🥰🇨🇦
Thanks sherry for response. What can I use instate conffite tubes ? I live in united state and I checked dollars tree and Michaels but i didn’t find it.
You could use any glitter . I just had them on hand. Thanks 🥰🥰🥰🇨🇦
You know... if you refrain from demolding the first part and just pour the second resin on top of the cured one you don’t have to struggle so much
Sherry, I was watching this video, and seen how much of the white resin you use for the flower. Why don’t you make a flower only with the left over, then when it is cured, do some clear or coloured resin over the top of it! Or if it would all run together, add something else to it, like the curly cues in the flower loops, you wouldn’t need to much! I don’t know but it would use up the left over white! Just some thoughts! Are you by any chance from Canada? When you mentioned Master Craft, gave me the idea! Love your videos, learn a lot from you! As for your freezer been there done that!
Thanks so much for watching and yes I'm from Ontario Canada 🇨🇦 Yes I've now started making the full 6 coasters will have another video up sometime tomorrow. Not the first time for the freezer wow it was gross hahaha🤢🤮 So where are you from and I hope your being safe with all this crazy stuff going on 😍
If you notice when you heated them with the heat gun they didn't move at all like they do on your newer videos so I think that it will work for you. When I don't want things to sink or move I wait till it's pretty warm before I start to use it.
Thanks sooooo much next set I will be trying this 🥰🥰🥰 thanks so much for watching 🥰🥰🥰🇨🇦
I’m sorry for what happened to your husband The same happened to me but Imanage to make some coasters with my good arm I hopevhe will be able to do more with his usable arm It takes time ,but in the end it’s worth the effort
May I ask directions on mixing the white, also where did you get the white? Beautiful
Beautiful! I tried this technique and ended up with air pockets on the bottom side when I put the flower top on creating the sandwich of the resin coasters. Any tips?
I tried your method of the double pour, first one worked fine, took that one out and did the second pour, well when I put the first pour on top, there was places that I couldn’t get the trapped air out so I have soft spots, any ideas what to do to fix it?
How many layers of resin are put in the coasters? Can you tell me the process of putting in the things? Is it resin, glitter, pigment, and then resin? Or is it resin, pigment, resin, glitter, resin, pigment, then resin again? I just wanted to know. Btw I love your videos.
For the first part of the coasters before the glitter at the bottom.
So for the first part I put clear resin in the mold then I add a small bit of glitter in the center then I put the white on. Leave it set for 24hr then I remove them from the mold add your glitter resin mix the mold then put the first layer on top. Hope this helps thanks so much and thanks for watching. 🥰🥰🥰🇨🇦
@@SherryMoulton Thank you so much!
Your welcome 🥰🥰🥰
Impressive! The flip and no lip. Subbing!
Thanks sooooo much and thanks for watching and SUBSCRIBING 🥳🥳🥳🥰🥰🇨🇦
Another cool project! I am wondering if you've ever used a color other than white for the petals? Do you use the white for a particular reason, like, does it's density have something to do with the way it keeps its shape or? Just wondering. Thanks!
No I've never used a colour but willing to try lol thanks so much and thanks for watching 🥰🥰🥰🇨🇦
might be a help if you make up clumps of your center for the flower ahead of time and let them cure,and then add them to the resin later when you start your project.
Ok.....what do I do if the back doesn't attach all the way and there's an air pocket
the group of four look like chrysanthemums 💜💜💜
Thanks sooooo much and thanks for watching 🥰🇨🇦
Sherry, I love these!! You have inspired me to try to make some for myself. Thank you!!
Thanks so much and thanks for watching 🥰🇨🇦
Great idea! I love the way the blue background shows through the flower
Thanks so much 🥰 thanks for watching 🥰
I absolutely love your coasters. I have a question, do you let your resin sit (particularly the white) so it's thicker and stays put?
Thanks sooooo much and thanks for watching 😍 Now the first time I tried it I didn't wait at all and they turned out amazing that's the black ones, the second time was the blue set and it turned out , now I did another set and I warmed my resin up and that was not so good I could hardly hold the bag it was that hot in this set the white did not spread and was like a bunch of 3D lines I didn't like this lol. Now with the pink set I did not warm the resin but I think I over heated the white it was a lit toooooo spread hahaha ... such a trial and error 😜 can be expensive....... hope this helped a little. 🥰🇨🇦
And no I don't wait , I mix all the resin and then hit record to video so you see when I do the white i dont wait ...
Beautiful !! Do you let your resin sit, how long ??
That’s such a cool idea love them❤️
Thanks so much and thanks for watching 🥰
I have one question what this casting craft does together with rasin
Beautiful Sherri, how long do you let your resin sit
Hey, sherry I am new to this field of resin art. Please explain few things if possible-
1 where we use pigments?
2 where we use alcohol ink?
3 where we use mica powder?
I'm kinda new as well learning as I'm going lol. You can use any them anytime and I even mix them together. I find the mica power usually gives a non transperant colour. The alcohol is used when you want a little bit of colour. I also use acrylic paint when I want a solid colour. I think pigments are matt and the mica powders a shimmery. I hope this helps.🥰 Thanks for watching 🥰🇨🇦
@@SherryMoulton thanks..much clearer picture for me
Glad I could help anytime 🥰🇨🇦
What makes these flowers float and layer like that ??
Yes I’m from Alberta, we are doing real good! Live in the rural area nw of Edmonton about 50 Klms. Where do you buy your glitter and Black diamond hues? I’m kind of tired of having to buy from the US, sometimes it takes forever! Would like to get some suppliers here in Canada! You keep well! Going to try these just love the flowers!
That's good we are safe as well . I get my pigments off of Amazon and the glitters I get from micheals.
@@SherryMoulton where can I find the molds. You make me want to do these
I have these in my Amazon shops here are the links
Canadian www.amazon.ca/shop/sherrymoulton
USA www.amazon.com/shop/sherrymoulton
I looooove these. Just curious, do you use any other ppe or ventilation besides gloves and an open window?
Wait,wait,wait until your sire the wet resin is cool before you drop the cured pieces on top. I saw how the steam was sealed on other coasters you did. These are pretty but save yourself the wonder in why you have steam and the wster it creates.❤
Thanks I will have to remember that for the next time 🥰 Thanks for watching ❤❤❤
Please, please tell me where you found your silicone molds. I am so excited to try this. All of your coasters have been gorgeous!!!!
Beautiful
Thanks sooooo much and thanks for watching 😍😍😍🇨🇦
These are gorgeous, I can't wait to try this myself. :)
Thanks so much would love to see them when you do 🥰 thanks for watching 🥰🇨🇦
Gorgeous
Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦
Can you use primary elements in your resin to make coasters?
Love watching you create. Always lovely results. Can I ask a question please? Is that a 30ml cup you were using to put the initial resin in? Thanks!
Thanks sooooo much and thanks for watching. Yes it is. 🥰🥰🥰🇨🇦
Happy accidents.. as bob ross would say. Dont worry when. You make a happy accident. It can be fixed. I got art resin from hobby lobby and I ordered one from amazon that was called art and glow both are very similar
Thanks sooooo much. Yes I agree with Bob Ross hahah. Yes I can get here as well in Canada. Thanks so much for watching 🥰🇨🇦
Fabulous work. What are the metallic curly-cues actually called? I’ve been looking for something like that and can’t find it.
Thanks sooooo much and thanks for watching. They are called mini confetti tubes. 🥰🥰🥰🇨🇦
Tres originale
Thanks so much and thanks for watching 🥰🇨🇦 Merci 🥰
I love your older videos too
Very pretty Sherry. My top edge always has a lip. Does yours? How do you get rid of it?
Thanks so much and thanks for watching 🥰 Yes this is why I tried it so both sides are smooth 🥰🇨🇦
Wow! Those are really beautiful!
Thanks sooooo much 🥰
Beautiful 🦋🌹❤️❣️
Are you related to Pam moulton
Love watching to learn more about resin pouring. Thank you
Thanks so much and thanks for watching 🥰🇨🇦
Hi,
I have subscribed to your channel, you make beautiful coasters
Thanks so much 🥰 thanks for subscribing and watching 🥰🇨🇦
i don't know if you answered this yet but what are the names of your fire opal glitter match??? and where can i find them
???
thank you
The glitter is Martha Stewart confetti glitter colour is fire opal. Be careful you wont be able to buy just one lol its soooooo beautiful. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦
Curiosity got me, had to see the blue ones also.
Lol I got you addicted hahaha. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦
When I have extra left, I always have an extra little project to dump my extra resin in, a bookmaker or something
Yes for sure.... I hate to waste the resin soooo expensive... Happy Easter and stay safe 🥰
A book-marker not maker lol dang autocorrect
Lol I hate auto correct 🤣
What resin do you use?
Turned out beautiful
Sherry have you ever tried a different color other then white. I ordered the white castin craft op but I got yellow and blue.
Thanks sooooo much and thanks for watching. No I have it and I just recieved my new one its blue .so will be playing around with it. Hopefully it will be the same as the white. 🥰🥰🥰🇨🇦
So pretty 😃❤️💙
Thanks sooooo much and thanks for watching 🥰🇨🇦
@@SherryMoulton you most welcome Sherry!!! Great job 👍👏👏👏💕
🥰🥰🥰
They look great! Happy Easter!
Thanks and Happy Easter to you as well🥰
It's blue Pearl. Pretty ❤️
Thanks sooooo much and thanks for watching 🥰🇨🇦
Do you seek your art? Didn't see a link to an etsy store, just an Amazon store with stuff you make it with.
Thanks so much for watching. I reopened my etsy shop not much in it lol
Here is the link www.etsy.com/ca/shop/SherryMoultonArt
Now I can sell my art on Amazon? Did not know that . Thanks so much. 🥰🥰🥰🇨🇦
Had that happen to me too, with my freezer.
Great Job Sherry. I’d like to give a shout out to Julia Cutts, “Pouring Your Heart Cut” in New Zealand... she also does the floral coasters and generously shares her expertise. I loved the blue coaster in this video... it’s one of my favorites. Blessings!💙
“I am special” I love it!!!
What is the white?
Thanks sooooo much and thanks for watching. The white is casting craft opaque pigment white. 🥰🥰🥰🇨🇦
@@SherryMoulton I thought so. Just got my shipment today.
interesting what you did that the pigment`s resin didn't mixed with basic resin?
Well I know that the casting craft opaque pigment white there must be some chemical thing lol Thanks so much for watching 🥰🇨🇦
My day with resin is a day with a lot of brain freeze! Love the video just found your channel. Very nice,I watched you put the white pigment in your resin and of course yours worked! I myself did the same thing twice now and both two ounce have not set up. I know it was mix correct because I use the remaining resin which was about 10 ounces on another form and it did set up fine. The two ounce came out like a piece of rubber. Same brand of pigment went into both projects. Green pigment fine white did not set. And the two ounce got one drop of white and green at least five drops. My resin was stone coat casting epoxy. Would you have any suggestion ? Is it just the white pigment. And the pigment is compatible with resin I bought it together. Thanks for your time!
Great video and technique! Thank you so much!
Thanks so much and thanks for watching 🥰🇨🇦
😀
Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦
Beautiful...they are called beads, for jewelry or any other craft you need them for. I love your creativity, thank you for sharing. So much love.
Can I ask why you pop them out and then put them on top of the background resin instead of just letting them cure and putting the background glitter on top? Just curious. Your coasters are gorgeous!
Thanks for watching 🥰 I hate sanding so if I flip them both sides are nice and smooth......
Sherry Moulton ahhh! Makes sense! Thanks!
Not everything I do makes sense lol 🥰
Sherry Moulton lol too funny!
Sherry Moulton I love this. Thank you. Where did you get those large molds