How to Replace Front Lower Control Arm 2013-17 Nissan Sentra

Поделиться
HTML-код
  • Опубликовано: 3 авг 2024
  • Buy Now!
    New Control Arm with Ball Joint Set from 1AAuto.com 1aau.to/ia/1ASFK06044
    Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. This video shows you how to install a new quality TRQ lower control arm in your 2013-17 Nissan Sentra.
    • Buy TRQ at 1AAuto.com: www.1aauto.com/yt/i/1ASFK06044
    • Check here for more videos on the 2013-2019 Nissan Sentra: • Nissan Sentra 2013-19 ...
    This process should be similar on the following vehicles:
    2013 Nissan Sentra
    2014 Nissan Sentra
    2015 Nissan Sentra
    2016 Nissan Sentra
    2017 Nissan Sentra
    2018 Nissan Sentra
    2019 Nissan Sentra
    Tools you will need:
    • Pry Bar 1aau.to/oa/1AXAA00020
    • 14mm Wrench 1aau.to/oa/1AXAA00010
    • 18mm Wrench
    • 14mm Socket 1aau.to/oa/1AXAA00015
    • 18mm Socket 1aau.to/oa/1AXAA00043
    • 21mm Socket 1aau.to/oa/1AXAA00043
    • 22mm Socket 1aau.to/oa/1AXAA00266
    • Pickle Fork
    • 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
    • Swivel
    • Torque Wrench 1aau.to/oa/1AXAA00044
    • Rust Penetrant
    • Center Punch 1aau.to/oa/1AXAA00055
    • Hammer 1aau.to/oa/1AXAA00091
    • Rubber Mallet 1aau.to/oa/1AXAA00413
    • Sledge Hammer 1aau.to/oa/1AXAA00091
    Subscribe: / @trq
    Check out our playlist:
    Nissan Sentra 2013-19 7th Generation: • Nissan Sentra 2013-19 ...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто/МотоАвто/Мото

Комментарии • 29

  • @TRQ
    @TRQ  3 года назад +2

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
    √ *Do it Yourself*
    √ *Save Money*

  • @CrisTc86
    @CrisTc86 2 года назад +10

    This is so awesome. Thanks for the vid. Better than paying dealership $1,000 + to do it.

    • @DannyGruesome
      @DannyGruesome Год назад +2

      Be sure to get an alignment immediately after

  • @BPoweredLove
    @BPoweredLove 2 года назад +2

    4:15 You're right, so that why I jack it up without the wheel on to load the suspension up.
    Great video!

  • @thelittlehelper749
    @thelittlehelper749 3 года назад +3

    It's not a Pathfinder but the idea's the same and right to the point thank you

  • @cha-ka8671
    @cha-ka8671 2 месяца назад

    Thank you TRQ for all your videos!!!

  • @gregcarter3830
    @gregcarter3830 3 года назад

    Really appreciate the how to videos! Thanks

  • @cha-ka8671
    @cha-ka8671 2 месяца назад +1

    That’s the fastest lower arm change I’ve ever seen. Only 6 1/2 mins 😂

    • @TRQ
      @TRQ  2 месяца назад

      +@cha-ka8671 Thanks for watching our video! 1aau.to/m/Shop-TRQ

  • @Godisangry
    @Godisangry 4 года назад +2

    i wish my ball joint stud would come out as easy as that one.

  • @coldjava
    @coldjava 2 года назад

    Great how to video! Thank you!

  • @Yuta3677
    @Yuta3677 22 дня назад

    If u are having trouble putting the bolts in, make sure to clean them since if the threads are rusty u probably won’t be able to get it in

  • @jawedabdul6928
    @jawedabdul6928 3 года назад +3

    Hi very good explanation +torque sequence i like it the most.

  • @7gooo
    @7gooo 4 года назад +1

    well done Andy

    • @TRQ
      @TRQ  4 года назад

      Thanks 👍

  • @thehegt
    @thehegt 2 месяца назад

    You tighten the lower control arm bushing on the air like that does it will be damaged when you put the tire on

  • @FionaRipley
    @FionaRipley 3 месяца назад

    only 42 ft lbs for the ball joint bolt? that seems a bit light. I cant find the spec anywhere, hope your right just followed this video yesterday!

  • @quentinchambers5148
    @quentinchambers5148 2 года назад

    What was the second bolt you removed

  • @NRASUPPORTER1911
    @NRASUPPORTER1911 5 месяцев назад

    Will this car need an alignment after changing the lower control arm? Or will it affect anything

  • @Epoajo
    @Epoajo 5 месяцев назад

    What’s a good source for those torque specs?

  • @shakeyaduarte4859
    @shakeyaduarte4859 Год назад

    Can you post how to replace cv axle on nissan Sentra 2015

    • @TRQ
      @TRQ  Год назад

      +Shakeya Duarte We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

  • @tristanbaijnauth3686
    @tristanbaijnauth3686 3 года назад

    Do you need to align the vehicle after changing the arm

    • @TRQ
      @TRQ  3 года назад +1

      +Tristan Baijnauth Yes you should perform an alignment after replacing any steering and suspension parts.

  • @tunnel419907
    @tunnel419907 2 года назад +1

    How to replace Nissan 2013-2019 sentra alternator?

    • @TRQ
      @TRQ  2 года назад

      +tunnel419907 We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ

  • @cha-ka8671
    @cha-ka8671 2 месяца назад

    Little tap tap taparooo

  • @williammueller3308
    @williammueller3308 3 месяца назад

    It should be noted that every single part of this is harder to accomplish than shown here

  • @timotheuskanguatuago6416
    @timotheuskanguatuago6416 Год назад

    👍👋☝🙏