Hi same problem audio got board out and the Capacitor don’t look good not got of board yet see it’s a 470 uf 10v what would be a good replacement upgrade thank you
i enjoyed the video very much very helpful to me , and I have a Kenwood ts 450s the capacitor in c104 is discolored it look the same as the one you showing your video but it does look like bulging out on top or bottom would you thing it would be bad thanks very much from W5ESH
I have the 450s and on the lowest setting on FM the power is around 8 watts . Can you tell me which pot will turn the FM output down to around 4 watts on its lowest setting Many thanks Andy
Hi Breton, I am facing a problem on audio. I have a kind of QRM and it seems that audio output lost its power. By the way frojm you video I am not able to understand if you are fixing the same problem. Thanks
The PCB under my C104 was dissolved, or otherwise stripped, down to copper, so I replaced C104 even though it was within spec. I still have low power on TX. I removed and tested C99 and C101 as well, and they're within spec. Is there another common cause of low (10 or less wattage) output on a TS-450S besides C104, C99, or C101 leaking?
This fix is for issues with audio output from the internal speaker. If you have issues with low TX power you need to look for faults in the Transmitter circuit.
Good morning,how are u?I have the same problem,i would like if possible to let me about the capacity of the three capasitors...thanks a lot,spyros sv8gth
What is that caps capacitance? and the other two larger ones? I have a audio output problem where it blanks out the audio output, same if you put too much audio into it. Thanks, No Sign.
yes, pin 4 is the output of the audio ic, so this is a very typical situation, Audio IC has plenty of output is being blocked by dead capacitor. cheers Brenton vk3cm
Can anybody tell me how to adjust the HF for am stations, I own a Kenwood TS-140s, When I use my scanner, am is fine, but the Kenwood will pickup the am stations. Thanks
Ciao Breton, volevo chiederti se conosci un software per gestire un kenwood TS690 SAT. Puoi darmi qualche notizia, ti ringrazio e ti saluto Alfredo IU0NIB
Thanks for the extensive explanation, today I fixed my TS-690 thanks to you ...73
Hi same problem audio got board out and the Capacitor don’t look good not got of board yet see it’s a 470 uf 10v what would be a good replacement upgrade thank you
i enjoyed the video very much very helpful to me , and I have a Kenwood ts 450s the capacitor in c104 is discolored it look the same as the one you showing your video but it does look like bulging out on top or bottom would you thing it would be bad thanks very much from W5ESH
Hi Brenton, having the same issue with the tx, 10w all bands, all modes- didnyou manage to sort this one?
What is the going price to totally recap a kenwood. TS-140s ? Thanks
I have the 450s and on the lowest setting on FM the power is around 8 watts . Can you tell me which pot will turn the FM output down to around 4 watts on its lowest setting
Many thanks Andy
Hi Breton, I am facing a problem on audio. I have a kind of QRM and it seems that audio output lost its power. By the way frojm you video I am not able to understand if you are fixing the same problem. Thanks
İ Have low audio problem.it is Due to c104 too??
I have a 590sg with no audio. Would this be same fix?
The PCB under my C104 was dissolved, or otherwise stripped, down to copper, so I replaced C104 even though it was within spec. I still have low power on TX. I removed and tested C99 and C101 as well, and they're within spec. Is there another common cause of low (10 or less wattage) output on a TS-450S besides C104, C99, or C101 leaking?
This fix is for issues with audio output from the internal speaker.
If you have issues with low TX power you need to look for faults in the Transmitter circuit.
Will this also effect transmit audio?
Good morning,how are u?I have the same problem,i would like if possible to let me about the capacity of the three capasitors...thanks a lot,spyros sv8gth
Where can I get.the.power.cord for a 690s
Were can I find if unit for Kenwood ts450s
Would that also cause low audio output locals tell me I sound like I'm far.away
What is that caps capacitance? and the other two larger ones? I have a audio output problem where it blanks out the audio output, same if you put too much audio into it. Thanks, No Sign.
470uF 10v
so if you have loads of output on pin 4 is that correct or incorrect?
yes, pin 4 is the output of the audio ic, so this is a very typical situation, Audio IC has plenty of output is being blocked by dead capacitor. cheers Brenton vk3cm
@@brentonmeadowsvk3cm thank you for clarification. i have a ts450 so far so good but i will know what to look for in future
Same problem for the 850?
Can be a capacitor for sure in 850, but 850 has a few possibilities. cheers Brenton VK3CM
Can anybody tell me how to adjust the HF for am stations, I own a Kenwood TS-140s, When I use my scanner, am is fine, but the Kenwood will pickup the am stations. Thanks
Ciao Breton, volevo chiederti se conosci un software per gestire un kenwood TS690 SAT. Puoi darmi qualche notizia, ti ringrazio e ti saluto
Alfredo IU0NIB
My 850 gorgles
thanks for the video de garth zs5gmw