Moro, sulla oli tko600 tässä? Itellä swappi tulossa kans niin tarvis kipeesti tietoa kaikista muutkoksista mitä tarttee.. Omani fordin 26 uranen 18,30cm kytkinakselilla ja aattelin adapteri levyllä ton naittaa niin saa alkuperäseen kepinreikään suoraan. Miten tuo akselin mitta lie passaa?
Kampiakselin päästä neulalaakeri pois ja holkki tilalle niin sopi tremec suoraan. Muistelisin että vaihdekeppi jäi hieman eteen, pienen kolon joutui kepille tekemään. Saattaa jäädä akseli vajaaksi jos paljon taaemmas vie, en ainakaan muista että olisin akselia lyhentänyt. Tuo on kohtuu tarkka laatikko "linjauksista", eli kardaaninpäästä. Romisee ja rämisee helposti, shimmailin kauan linjaa sopivaksi että sai turhat rominat pois.
@@timorauhala4102 Nii laatikon kannatinta jouduit säätelemään ylös alas? Mulle tulossa libertyn faceplate versiona tuo nii varmaa rämisee jo valmiiksi mutta ei pikku melu itteä haittaa. Eli tuhlaan ilmeisesti 425 puntaa turhaan tohon adapterilevyyn. Sipasu kepinreijjästä ja kytkinkopalle hitsaus ja koneistus?
Ee und die anderen beiden sind ja auch noch ein paar Bilder zu machen und die anderen beiden sind ja auch noch ein paar Bilder von der Firma und die anderen beiden sind
This video will never get old.
And thats how you drive a Cossi.
That's not just an engine it is a monster!
awesome cossie!!!! cars like that never made again!!!
wow,good power for an old car like that
That turbo is ridiculous lol, engine bay is cleaner than my house 😅👍, got to love the cosworth, not seen any on road for ever
I like the extra pulley on the cam belt 👌......must help stopping the turbo sucking it off🤣
I haven't seen a bigger turbo on any Cosworth before - it scares you to even look at it! lol
A friend of mine has one in storage, I go drool over it from time to time 🤤
Big power you got there!
that is one f#*cking massive turbo
We need more video's of this monster on full chat! Very impressive although the turbo seems a little overkill :P
Crazy cosworth monster!!
so....turbo gets on boost at 6000rpm because its as big as a human head.......sounds good to me!
Makes no difference he can still keep it up on the pressure
Bang - tidy. More power than USS Enterprise. Flame - spitting gnarl fest 🔥
that is the best saph i ever seen!!!!!!!!!!
Amazing!! 👌🏼
That's sounds so good
Make a right yorkie pudding in that turbo housing
Luv a Fast Ford RS Cosworth all day oh yes
insane!
What EGT thermocouple you are using ?
what a badboi of a sierra! BOOM!!
Holset hx40 super? Forged connecting rod? Porting?
Love the deaerator design, who's made plenum ? Seen before somewhere..
Watching this in 2022. Is it still around?
Its a Yb so probably 😂
It's a beast wot a car
Now that is a car! Wtf is that turbo wow shes a monster.
The turbo is almost the same size of the engine!
what turbo you running?
I like it.
original this car is better than an audi s2 !
Holy shit, she's a beast
nice intake manifold, where did you buy it ?
needs more numbers on the rev counter! lol. about 10,000rpm?!
very good!!!!!!!!!!!!!!!!!!
big turbo! :D
Nice more vids please
Зачьотно!!!!
Where did you get this engine??
sempre e solo sierra cosworth!!!!!!!!!!!
Let's go!
Madness
Nice dose
Speedo was off the dial there.
Timo,what gearbox and rear diff you have? thanks
+ThanasisGR, Tremec Tko600 gearbox, alcon twinplate clutch and BMW M5 rear diff.
+cossu500 Thank you
That’s going to go pop sometime soon 😬
It lasted him three years before he sold it still working :)
LOOOL!
Bad ass
no mortal FORD o nada !!! :D
How long did it last before chucking a rod through the side of the block?
+slug Face Three years without opening the engine, and then sold out to other car as fully working condition.
Is that a T25 turbo ?? Throw some serious boost out them babys
LOVE the color what is it?
Magenta 👍
Che turbo ai messo di un Scania v8
OMG ! now just put wings to start flying !
Godfrey?
Cossie, Latin for "no cambelt".
motor motor :D
Tämä on se oikea teiniuhoamista kossu sierra jota kehuttiin.
wow can do that in my ford fiesta 1.3
wht year
stroj strojeva
держака не хватает
Moro, sulla oli tko600 tässä? Itellä swappi tulossa kans niin tarvis kipeesti tietoa kaikista muutkoksista mitä tarttee.. Omani fordin 26 uranen 18,30cm kytkinakselilla ja aattelin adapteri levyllä ton naittaa niin saa alkuperäseen kepinreikään suoraan. Miten tuo akselin mitta lie passaa?
Kampiakselin päästä neulalaakeri pois ja holkki tilalle niin sopi tremec suoraan. Muistelisin että vaihdekeppi jäi hieman eteen, pienen kolon joutui kepille tekemään. Saattaa jäädä akseli vajaaksi jos paljon taaemmas vie, en ainakaan muista että olisin akselia lyhentänyt.
Tuo on kohtuu tarkka laatikko "linjauksista", eli kardaaninpäästä. Romisee ja rämisee helposti, shimmailin kauan linjaa sopivaksi että sai turhat rominat pois.
@@timorauhala4102 Nii laatikon kannatinta jouduit säätelemään ylös alas? Mulle tulossa libertyn faceplate versiona tuo nii varmaa rämisee jo valmiiksi mutta ei pikku melu itteä haittaa. Eli tuhlaan ilmeisesti 425 puntaa turhaan tohon adapterilevyyn. Sipasu kepinreijjästä ja kytkinkopalle hitsaus ja koneistus?
@@timorauhala4102 millä turbolla oli. oli meinaan iso
@@weebi4204 holset pro 52.
@@timorauhala4102 juu millä siivillä?
I want to buy it. Will you sell it to me? Hahaha :D
🤔🤔🤔🙉😁😁😁🙃🙃🙃
its oryginal Ford's engine ?
Yes, a DOHC pinto reworked by Cosworth, implanted into the 3 door Cosworth, Sapphire Cosworth and Escort Cosworth.
Wtf is going on the size of the turbo 😂
she's no cossie replica!
not much grip :D needs 4x4 or slicks :)
1:13 OH! that explains alot!!
It's a shame.
τοο σεχυ
Ee und die anderen beiden sind ja auch noch ein paar Bilder zu machen und die anderen beiden sind ja auch noch ein paar Bilder von der Firma und die anderen beiden sind
Incontrollabile!!! Non buono..
Boring boring boring
Too much power and a 4x4 Cosworth with 500bhp would smash that around