Christy, I hope everyone appreciates the lengths you go to when you get those close up shots. I would not want to be hovering over that spinning blade while trees are about to come down. I think there are some issues to be addressed with operator safety. I know that when I start to go through brush with my open operator station tractor I usually get pricked and poked until I cut out half of the tree or bush to get where I'm going. Even with the backhoe pushing the way ahead of me (backwards of course) I still catch branches from the side. I also noticed that the blade rides up as you try to get the stump down to the ground. I wouldn't worry about the stumps if I had a stump grinder, and as you said, a grapple is a must with this attachment, so buyer plan ahead. I hope to see it on smaller tractors to see if it can run with those smaller machines. From this video I think you may have it paired to the right machine as it is.
I have a DFM LT3200 I use on my 2038r. With that and the grapple on the loader, I can clear cedars and other trees with serious efficiency. One of my most used tools at the moment.
I really enjoy watching your videos and the scriptures you add. I always want to make comments when I first start watching, and as usual, you cover what I am thinking before the video is over. I thought you needed to have a grapple on when you were still in your yard, and you mentioned why you didn't. Jumping from tractor to tractor I guess you would notice the difference, but I loved the E-Hydro on the 3320 I had. You do spin tires more without feeling it as you did in this video. I messed up selling that tractor to go bigger. I also let my Millonzi grapple go with it. Nobody else has produced a grapple like that one. Only a few guys on Tractorbynet got them maybe 14 years ago. It was kind of curved on the bottom and it would hold more and allow you to get better leverage under roots. Light weigh and just 48" it worked great on the 3320. I have a Titan grapple on my Kioti 4710 and it works but it is heavy. Keep up the good work, and if the economy ever gets better maybe I can get one of these tree saws.
I need one of those cutters, that is nice, the best use for this one seems to me is a tag team, one cutting then the other comes right behind with the grapple and removes the debris so you can cut more again plus clean the stumps to ground level so no one damages their tires,
Tim, thanx for the honest assessment… warts and all! It is apparent that the tool requires its own operating techniques. I can see that it can definitely be useful. Your point about clearing in yards/fields where mulching is unwarranted is well stated. And pairing a plunge cut with a grapple pick would not only be more productive but likely yield a more groomed look. Cap’n Kleeman built one out of an old brush cutter. His Whoppa-Choppa won’t cut the bigger trees but otherwise operates the same. Thanx to you and Christie for the excellent demo!
Have the TurboSaw which is very similar and have used it for several years to cut brush, drop trees to 12" diam, and shaves the stump off to below ground level. No problem with rocks. Cannot do at the same level at the ground with a chainsaw.. unless one does not care for their chain. Leaves an area that is easy to mow over with a lawn mower. Works much, much better with an hydraulic top arm to adjust the angle of the saw blade. Very useful tool as you have demonstrated so well on the video.
interesting attachment. seems to cut fast, add on a hydraulic claw above the cutter wheel and just close it around what you cut and drive away with it. of course, you could not likely do that with big trees, but brush and small trees would likely be no problem.
I have a battery powered brush cutter. Whenever the blade gets hot when cutting through a 2+ inch tree I get the same smoke you were getting. I makes me feel like I need to oil something but there is no mention of oil in the manual.
For a lot of these cool new PTO attachments a hydrostatic transmission and independent PTO are a must. I can’t imagine trying to use this, or a stump grinder with a gear drive. That being said, I actually like my old gear drive machine over hydro for most of what I do.
A guy with an old WD Allis , that Knows how to us the wet hand clutch, can slip it all day long and not hurt it. That might be the only case where a gear drive could be used without a lot of trouble. 😎
I like this tree saw. If you had one person on a tractor with the tree saw and another running a tractor with a grapple, then you could get brush cleaned up in a hurry. Pretty awesome. Thanks for showing the tree saw to us viewers.
Took a trip to Tipton today getting ready for the blacksmith conference on 3,4,5 Jun and on the way back I drove by so as to go around the street work in town. We couldn't help but notice the deck of cards barn up the road from you. What amazing strength those couple of beams have that are still holding that roof. 🙂
I truly enjoyed watching you work that new cutter especially on the tower property. That cutter, a grapple and...a match, I believe would work just fine. Thanks again.
We have about 5 acres of 8"-12" trees which all grew around the same time so they are have very few branches and would be perfect to bring down with that type of saw. Other videos I've seen show it working very well with trees that are less "bushy" that you can get right up to without branches interfering.
Good video folks , that said , Tim if you make a 1 hole down adjustment on the push bar that will help you out and as your backing in to the material to be cut turn the steering wheel left or right to lay it down and later come back with the mulching attachments and mulch IT up that's how we get it done quickly and efficiently
Same concept as a feller/buncher that's used in timber cutting, only a lot smaller. You just have the cutter. Very interesting attachment and very informative.
I have been wanting a "TurboSaw" brand name for years, Now that Baumalight has come up with a competing product it will be interesting to see the price difference. Could not find it with your link, but found it on the Baumalight website. It seems pricer than that of the "TurboSaw". I know you promote Baumalight products and not to sell them short, it looks like a very good product, but to be fair, the "TurboSaw" seems to have a beefier push bar along with a hydraulic model for grabbing trees. It was hard to tell if the Baumalight push bar will stand up. As you had mentioned and ask years back on your channel, if you plan to plow the field, then you would have to plan on removing the stump completely. Great video and will look into the alternative. Will have to look and see if Daugherty Forestry still makes the TurboSaw. Thanks
Very cool attachment and good video of its use is several different situations. I think you "hit the nail on the head" with how a grapple would compliment this attachment VERY well and/or a second tractor with a grapple. Would make such fast work of it and reduce the area of "mess" that the forestry mulchers throw EVERYWHERE. Plus this could just about replace a stump grinder completely (maybe not in every circumstance or if grinding it 6" deep was wanted, but...) and it would reduce the "mess" that stump grinding creates. Cut the stump at ground level and create "cookies" above, and if too large to do in one pass, cut as deep as possible, pull back out and break the "partial cookie" off and out of the way with a sledge hammer, axe or break it off with the grapple. Then go in for more, repeat.
is their not any front mount attachments for brush an mulching an such, we made one back in the day from a old brush deck mounted a motor on top took off the bucket an attached the deck to the front an it worked great an we didnt break our necks looking back wish i had pic's of it to show might be a good thing to go on the market better then messing ur neck up front attachments
a fella could get a lot of clearing done with that setup, and like you mentioned, a grapple as well. the big plus to this over a mulcher is being able to move the debris to a different location on site to dispose of. like you said, might not always want the mulcher mess where you are clearing. very cool.
Wow!, I've got to agree with you I too love the result. It would be nice if that upper push bar could be easily adjusted towards the tractor (some sort of quick link) to allow for cutting down larger trees that don't flex much and are vertical or have multiple branches angled outwards all around it. You'd still want the bar there to push the trees over and away. I'm dealing with this same job right now - today (I'm actually just now procrastinating and watching videos on this before going out to do this same work). I'm converting an area from treed to flat & mowable so I can install a couple of portable shelters (tractor accessories...). I've tried different things and currently: - cut down trees using sharp chainsaw chain. - saw and remove using grapple. - install my sacrificial chainsaw chain and cut down to ground level. I'm surprised how well the Oregon 72LPX chain survives dirt and grit (I bought it because reviews claimed it didn't dull with dirt and grit). - use flail mower to cut and shred remaining brush. - for areas inside shelter I plan to remove the stumps using the 1025R backhoe so they don't sink. I've never tried removing stumps with my 1025R yet. I was spoilt in my youth using large backhoes and large excavators. - bring in fill to ensure accessories stay dry (right now the area is low and wet). I might also add gravel inside the shelters.
It would be interesting to compare the complete cycle time using that cutter, then grapple, moving it, stacking it and either chipping or burning it vs using either a flail mower or brush shredder to slowly cut/grind up the brush, in one step.
This seems like it's great for larger trees, for brush clearing demo the baumalight cp572. Max diameter is 4 inches they say but that's more brush vs trees
Tim you guys make awesome videos. The tractor saw needs to vertical grappler to bring the first tree or two away from the other one so you can saw it off. It's awesome how low it cuts them off. Thanks for the awesome video you and your wife are doing a awesome job.
@@TractorTimewithTim you are quite welcome. The last thing you where doing back in and cutting them down. The bar that pushes them back. Maybe if you would put one on it. That angle's to the left. Maybe they wouldn't full out on the right where you are cutting next. Just a thought to try. Good luck 👍
I've seen this Baumalight product on Farmer's Daughter N.C.'s channel. Only difference was they were using a Kubota 2650. One big benefit this product has aside from the weight, is the ability to use a quick hitch like with the smaller stump grinder. At least it can cut at ground level which can reduce the time to grind stumps.
How much debris does that thing throw? Seems like it would be prudent to not get too close to that without eye pro, a face shield, and heavy clothing to pad any impacts from thrown bits of brush. Looks like it'll do quite the number on the brush. Great vid as always.
Is it possible (or feasible) to but the cutter on the front of the tractor? I know it needs a PTO… Can you connect the grapple to the rear? I will have a serious “crick” in my neck if I have to clean up 70 acres ~
Cool attachment but I'd be hesitant to cut a large with it. And what happens if the blade gets pinched it a large tree? Probably best for smaller stuff.
You’ll not be able to cut a large tree….it wouldn’t go more than say 8” in. If tree can’t be pushed at that point, ya can’t cut further in. As for pinching, pretty hard to do so. The bar at the top will push a tree if small enough. If too large, it wouldn’t cut far enough to punch anyway. Wish you could operate it…would be easier for you to visualize than for me to describe in words.
@@TractorTimewithTim maybe I can stop by sometime 🤣 I have thousands of small fir trees I need to cut (6 inches max I'd say). This would be much faster than the chainsaw.
hey can you change the angle of the push bar above the saw head..? I've see the push bar on forestry heads set much more fwd. to push brush over more..
Finally you got to the second tractor with a grapple idea! Sounds like a great combo. However, I would suggest two things: eye protection and a good pair of gloves. Always think safety!!😜
Regarding the clumps of trees... I wonder if in cases where the trees are limb locked if you could raise the cutter and cut the first layer of stems and then lower the cutter and take a section off the bottom of the cut stems' stump. Then allow the blade to move those sections off to the side as it spins. Being limb locked the cut stems may stay up such that you can then reach the stem behind them... I suspect that it would be faster than moving the tractor and might be worth a try.
@@TractorTimewithTim what do you suggest being on stumps that are over the 2 feet. I really need a good way of getting below The surface and to be total honest I would trust what you said over a lot of people.
How much money are you willing to invest? And what is the desired final result? Saw as close as possible then A stump grinder would get it below grade so that you could drive over…but likely not grow good hay. For best results, rent or hire a full sized excavator. Dig out the stumps. Then, pile and burn them (which may take LOTS of effort since there will be dirt on them. I would recommend the latter. Dig em out and be done with them!
Wonder what would be faster, mulcher by itself or this cutter then mulching the dropped trees. IIRC, the slowest part of mulching was getting the trees on the ground.
I'm finding with my 3046r that the reverse peddle is to me to aggressive maybe be the word. To me it needs a finer action in the first 1/3 to 1/2 of the peddle travel. Then can ramp up and go. I didn't like the feel to the point I called the dealer to see if there was any adjustment in the electronics. Doesn't sound to be much if any they can do.
Tim, I have a video idea for you. I've read the loader manual several times and I'm sure I'd figure it out but I learn best by reading and seeing. Could you do one with the info for removing the 320 loader and making sure it's in proper adjustment?
@@TractorTimewithTim I guess I thought the 3R series had a pedal adjustment like the Grand L?🤔 See now you have another reason to go to the finance committee to see Neil Messick. Lol 😆
Great job Christy getting the awesome video while having mud thrown at you. My vote is for getting a tractor for Christy too. Oh wait, who will film it. Let's make it a family affair and get everyone involved. LOL 😆
That would work great with a grapple on the front of the tractor so as soon as you cut it down you could just pick it up with a grapple and haul off to debris pile. I have a small spot at my yard that needs this done. Can you bring it to Pennsylvania? It would only take about 1 hour to do. Lol. Just think of all the scenery you could take in coming over.
Wow, Tim I like it! I am also curious. I’ve been dealing with larger ash trees leaving stumps that were cut a foot or so tall. As you point out, using the stump grinder in this situation is a slow process. I see you cut one tree about 12 inches in diameter. With larger stumps, could one come in from another direction to cut a 24 inch stump? Cutting at ground level in the woods would eliminate using the stump grinder. Does it seem like that would do it? Again, kudos and thanks to Christy on great camera work that allows us to see how it works. Blessings.
Were you in 4 wheel drive? saw the back wheels spinning and it didn't look like the front tires were moving. I could use something like that, but can't do it right now.
This strikes me as the sort of attachment that can do some specific tasks REALLY well, but for broader applications there are better solutions. That said, I can think of some tasks on my property that this thing would be PERFECT for! Thanks for another great video!
Interesting. It has less teeth. It is lighter. Not sure either of those are good…but it does have a larger diameter cutting wheel. I would be concerned about trees as large as the one in their video…what if it decides to fall your way??
I have a woodland mills wc88. I like it but i dont love it. It works alright. If the stuff is real branchy you have to do a lot of annoying and time consuming trimming …. If you can make a fire somewhere and use a grapple to pile it up you might be better off …. The chipper is very manual labor intense ….
@@TractorTimewithTim I can generate a lot of brush around my land every year and mulching or burning is not always practical. I also just ordered a sawmill so some of the scrap will be chipped for mulch to rot down for the garden.
Think the smoking is just the tree after being cut riding on top of the spinning disc getting hot. Looks to do great on ones you can get to the stump fairly easily. When you really have to bury the tractor and yourself into a huge deep bush to get to the stump don't think would like that. However I do think it has it's special place in certain jobs.
Good assessment @18:00 minute mark, Tim. Looks like a solution looking for a problem. Most of what you went over, a good brush hog can handle and pulverize, except for the bigger trees, but a chainsaw and excavator, or stump grinder would take care of them. Nice demo though.
Tim that saw with another tractor with a grapple would clear that insanely fast. And the good thing is you already have another tractor operator / camera lady. 😂
While it might be big for a 3series. A 60" Brown Tree cutter could do the site prep level tree removal and breaking up of material. Think they need 50hp min. Maybe a five series.
Tim, not to be Safety Sally, however you should have some sort of glasses on for sure, be it sunglasses or safety glasses. Especially when you go back into the brush with limbs sticking everywhere, I would hate to see a branch stick you in the eye, or a piece of wood! Safety First! 😎👍
I noticed that you chose a bit larger tractor than your "usual" 2035R tractor. Good lookin' tool. I hope the local equipment rental company considers adding this tool to their inventory.
Great video Tim. Seems the attachment almost needs some teeth on top and bottom of the blade and maybe offset to one side would be nice to keep the tractor out of the branches.
Are you going to do a 3rd function or a diverter on that tractor? Might be a good opportunity for a side by side comparison... Honestly, I love the 3rd function, but if I had it to do over again, i might be more inclined to get a diverter valve instead. The tree saw looks AMAZING, by the way.
When you mentioned backing into it then turning around to clear it with the grapple, I thought the dream team would be 1 tractor backing in with the tree saw and 1 perpendicular to that to sweep away the cut trees each time you pulled forward to reposition for the next run, and sure enough, you mentioned the possibility nearer the end. :)
Maybe you could feature a Mirror attachment that allows you to not have to twist your spine around to cut behind you!!! ...There has to be one out there right?
Yes, but the mulcher attachment has the same problem, just in reverse order. Seems to me if you were buying 1 attachment this would be a much more viable solution as so long as you had the pto hp you could probably cut up to 18"-20" diameter trees. You ain't doing that with even a $30k mulching head on a 100 HP track loader.
During most of the video I was wondering why you weren't using one of the 1025r's with a grapple. Isn't your trailer large enough to carry both machines? Of course, a grapple on the one machine would make it so much easier. Do you get the impression that the 1025r could handle this new cutter? (not talking about Johnny X)
It seems that this machine isn't so much as a thick brush type of clearing, but more accurate going after single trees, something like a feller buncher a logging company would use. Maybe use this in tandem with the mulcher. Use the mulcher first and clear the small stuff first then go after what is too big for the mulcher with the saw.
We love ya'll Tim and Kristi. Kelli and I would like Kristi to wear eye protection, maybe a welder's mask or a medieval knights shield getting that close to that thing! Hahaha!
That cutter along with venny would clear that beautifully
Christy, I hope everyone appreciates the lengths you go to when you get those close up shots. I would not want to be hovering over that spinning blade while trees are about to come down. I think there are some issues to be addressed with operator safety. I know that when I start to go through brush with my open operator station tractor I usually get pricked and poked until I cut out half of the tree or bush to get where I'm going. Even with the backhoe pushing the way ahead of me (backwards of course) I still catch branches from the side. I also noticed that the blade rides up as you try to get the stump down to the ground. I wouldn't worry about the stumps if I had a stump grinder, and as you said, a grapple is a must with this attachment, so buyer plan ahead. I hope to see it on smaller tractors to see if it can run with those smaller machines. From this video I think you may have it paired to the right machine as it is.
Tim, thank you for picking up a 3 series tractor. They are a good size tractor for so many tasks! God bless my brother and sister!
I have a DFM LT3200 I use on my 2038r. With that and the grapple on the loader, I can clear cedars and other trees with serious efficiency. One of my most used tools at the moment.
Also, Definitely wear safety glasses...At least with my saw.
I really enjoy watching your videos and the scriptures you add. I always want to make comments when I first start watching, and as usual, you cover what I am thinking before the video is over. I thought you needed to have a grapple on when you were still in your yard, and you mentioned why you didn't. Jumping from tractor to tractor I guess you would notice the difference, but I loved the E-Hydro on the 3320 I had. You do spin tires more without feeling it as you did in this video. I messed up selling that tractor to go bigger. I also let my Millonzi grapple go with it. Nobody else has produced a grapple like that one. Only a few guys on Tractorbynet got them maybe 14 years ago. It was kind of curved on the bottom and it would hold more and allow you to get better leverage under roots. Light weigh and just 48" it worked great on the 3320. I have a Titan grapple on my Kioti 4710 and it works but it is heavy.
Keep up the good work, and if the economy ever gets better maybe I can get one of these tree saws.
Tim great video. As always, I appreciate the insight to attachments I haven’t seen before as well as them actually being used.
I'm going to buy this. That attachment with my grapple and stump grinder and last flail mower will do it all!! Thanks for the video,
I need one of those cutters, that is nice, the best use for this one seems to me is a tag team, one cutting then the other comes right behind with the grapple and removes the debris so you can cut more again plus clean the stumps to ground level so no one damages their tires,
Agreed. Two tractor team would make this fast!
Tim, thanx for the honest assessment… warts and all!
It is apparent that the tool requires its own operating techniques. I can see that it can definitely be useful. Your point about clearing in yards/fields where mulching is unwarranted is well stated. And pairing a plunge cut with a grapple pick would not only be more productive but likely yield a more groomed look.
Cap’n Kleeman built one out of an old brush cutter. His Whoppa-Choppa won’t cut the bigger trees but otherwise operates the same.
Thanx to you and Christie for the excellent demo!
Have the TurboSaw which is very similar and have used it for several years to cut brush, drop trees to 12" diam, and shaves the stump off to below ground level. No problem with rocks.
Cannot do at the same level at the ground with a chainsaw.. unless one does not care for their chain. Leaves an area that is easy to mow over with a lawn mower.
Works much, much better with an hydraulic top arm to adjust the angle of the saw blade. Very useful tool as you have demonstrated so well on the video.
interesting attachment. seems to cut fast, add on a hydraulic claw above the cutter wheel and just close it around what you cut and drive away with it. of course, you could not likely do that with big trees, but brush and small trees would likely be no problem.
I have a battery powered brush cutter. Whenever the blade gets hot when cutting through a 2+ inch tree I get the same smoke you were getting. I makes me feel like I need to oil something but there is no mention of oil in the manual.
that would be soooo productive having a second tractor grappling the brush as another one did the cutting! great idea
Using two machines will help..... nice video Tim, Great attachment.... 👍👌
love watching you guys premier and demo new attachments!
Thanks for watching!
For a lot of these cool new PTO attachments a hydrostatic transmission and independent PTO are a must. I can’t imagine trying to use this, or a stump grinder with a gear drive. That being said, I actually like my old gear drive machine over hydro for most of what I do.
Hydrostatic required for this attachment.
A guy with an old WD Allis , that Knows how to us the wet hand clutch, can slip it all day long and not hurt it. That might be the only case where a gear drive could be used without a lot of trouble. 😎
I like this tree saw. If you had one person on a tractor with the tree saw and another running a tractor with a grapple, then you could get brush cleaned up in a hurry. Pretty awesome. Thanks for showing the tree saw to us viewers.
Agreed 👍🏻
Took a trip to Tipton today getting ready for the blacksmith conference on 3,4,5 Jun and on the way back I drove by so as to go around the street work in town. We couldn't help but notice the deck of cards barn up the road from you. What amazing strength those couple of beams have that are still holding that roof. 🙂
I truly enjoyed watching you work that new cutter especially on the tower property. That cutter, a grapple and...a match, I believe would work just fine. Thanks again.
Awsome attachment for sure.
TTWT, That was a cool video showing the disc saw. I like the variety of videos with different attachments and projects. Thank you!
Thanks Hugo!
I think it would work great for someone who owns a wood lot that has a lot of brush to clean up . thanks again for your insight Tim...
We have about 5 acres of 8"-12" trees which all grew around the same time so they are have very few branches and would be perfect to bring down with that type of saw. Other videos I've seen show it working very well with trees that are less "bushy" that you can get right up to without branches interfering.
Good video folks , that said , Tim if you make a 1 hole down adjustment on the push bar that will help you out and as your backing in to the material to be cut turn the steering wheel left or right to lay it down and later come back with the mulching attachments and mulch IT up that's how we get it done quickly and efficiently
Interesting! Thanks.
Same concept as a feller/buncher that's used in timber cutting, only a lot smaller. You just have the cutter. Very interesting attachment and very informative.
I’m wondering if a ‘vertical grapple’ like the Buncher would work on this unit?
@@TractorTimewithTim I think so. As long as you have enough ballast weight to handle it.
It's cool that you have a playground for these implements. The evolution of bigger, faster, stronger is on full display👍
I have been wanting a "TurboSaw" brand name for years, Now that Baumalight has come up with a competing product it will be interesting to see the price difference. Could not find it with your link, but found it on the Baumalight website. It seems pricer than that of the "TurboSaw". I know you promote Baumalight products and not to sell them short, it looks like a very good product, but to be fair, the "TurboSaw" seems to have a beefier push bar along with a hydraulic model for grabbing trees. It was hard to tell if the Baumalight push bar will stand up. As you had mentioned and ask years back on your channel, if you plan to plow the field, then you would have to plan on removing the stump completely. Great video and will look into the alternative. Will have to look and see if Daugherty Forestry still makes the TurboSaw. Thanks
Very cool attachment and good video of its use is several different situations. I think you "hit the nail on the head" with how a grapple would compliment this attachment VERY well and/or a second tractor with a grapple. Would make such fast work of it and reduce the area of "mess" that the forestry mulchers throw EVERYWHERE. Plus this could just about replace a stump grinder completely (maybe not in every circumstance or if grinding it 6" deep was wanted, but...) and it would reduce the "mess" that stump grinding creates. Cut the stump at ground level and create "cookies" above, and if too large to do in one pass, cut as deep as possible, pull back out and break the "partial cookie" off and out of the way with a sledge hammer, axe or break it off with the grapple. Then go in for more, repeat.
All good observations!
is their not any front mount attachments for brush an mulching an such, we made one back in the day from a old brush deck mounted a motor on top took off the bucket an attached the deck to the front an it worked great an we didnt break our necks looking back wish i had pic's of it to show might be a good thing to go on the market better then messing ur neck up front attachments
a fella could get a lot of clearing done with that setup, and like you mentioned, a grapple as well. the big plus to this over a mulcher is being able to move the debris to a different location on site to dispose of. like you said, might not always want the mulcher mess where you are clearing. very cool.
Leave the mulched material a year or two and it will have improved the soil.
Wow!, I've got to agree with you I too love the result.
It would be nice if that upper push bar could be easily adjusted towards the tractor (some sort of quick link) to allow for cutting down larger trees that don't flex much and are vertical or have multiple branches angled outwards all around it. You'd still want the bar there to push the trees over and away.
I'm dealing with this same job right now - today (I'm actually just now procrastinating and watching videos on this before going out to do this same work).
I'm converting an area from treed to flat & mowable so I can install a couple of portable shelters (tractor accessories...).
I've tried different things and currently:
- cut down trees using sharp chainsaw chain.
- saw and remove using grapple.
- install my sacrificial chainsaw chain and cut down to ground level. I'm surprised how well the Oregon 72LPX chain survives dirt and grit (I bought it because reviews claimed it didn't dull with dirt and grit).
- use flail mower to cut and shred remaining brush.
- for areas inside shelter I plan to remove the stumps using the 1025R backhoe so they don't sink. I've never tried removing stumps with my 1025R yet. I was spoilt in my youth using large backhoes and large excavators.
- bring in fill to ensure accessories stay dry (right now the area is low and wet). I might also add gravel inside the shelters.
It would be interesting to compare the complete cycle time using that cutter, then grapple, moving it, stacking it and either chipping or burning it vs using either a flail mower or brush shredder to slowly cut/grind up the brush, in one step.
This seems like it's great for larger trees, for brush clearing demo the baumalight cp572. Max diameter is 4 inches they say but that's more brush vs trees
Tim you guys make awesome videos. The tractor saw needs to vertical grappler to bring the first tree or two away from the other one so you can saw it off. It's awesome how low it cuts them off. Thanks for the awesome video you and your wife are doing a awesome job.
Thanks for the kind words. I agree….a vertical grapple would really help!
@@TractorTimewithTim you are quite welcome. The last thing you where doing back in and cutting them down. The bar that pushes them back. Maybe if you would put one on it. That angle's to the left. Maybe they wouldn't full out on the right where you are cutting next. Just a thought to try. Good luck 👍
Get some hi vis covers for the guy wires. The second or third year when you are complacent is when they are good to have.
Love your videos! Look forward every Sunday morning to watch TTT! 👍🏻🇺🇸
can you raise the auto connect for the mid mower, looks like a stray tree limb could easily damage it
Not very high. Unfortunately.
Another great reason to get a skid steer.
Yup, just add $100k to cost
It does the job intended; I was thinking about your back being twisted back around , cant it attach in the front
Unfortunately, no. Not with a small tractor.
I've seen this Baumalight product on Farmer's Daughter N.C.'s channel. Only difference was they were using a Kubota 2650. One big benefit this product has aside from the weight, is the ability to use a quick hitch like with the smaller stump grinder. At least it can cut at ground level which can reduce the time to grind stumps.
Tim you were like RAMBO with that thing. Had me laughing 😂… The speed you went through that brush was incredible
How much debris does that thing throw? Seems like it would be prudent to not get too close to that without eye pro, a face shield, and heavy clothing to pad any impacts from thrown bits of brush. Looks like it'll do quite the number on the brush. Great vid as always.
Thats really cool Tim and Kristy.
Tim that attachment works well for cutting and stump grinding
Is it possible (or feasible) to but the cutter on the front of the tractor? I know it needs a PTO… Can you connect the grapple to the rear? I will have a serious “crick” in my neck if I have to clean up 70 acres ~
Interested in knowing how you are going to stop that from growing back. That's my problem. Great video. Skip McCain
Gonna mow right over it weekly :-)
Cool attachment but I'd be hesitant to cut a large with it. And what happens if the blade gets pinched it a large tree? Probably best for smaller stuff.
You’ll not be able to cut a large tree….it wouldn’t go more than say 8” in. If tree can’t be pushed at that point, ya can’t cut further in.
As for pinching, pretty hard to do so. The bar at the top will push a tree if small enough. If too large, it wouldn’t cut far enough to punch anyway.
Wish you could operate it…would be easier for you to visualize than for me to describe in words.
@@TractorTimewithTim maybe I can stop by sometime 🤣 I have thousands of small fir trees I need to cut (6 inches max I'd say). This would be much faster than the chainsaw.
@@stephenphilbrook6239 you are near me?
@@TractorTimewithTim unfortunately no. I'm in Maine.
hey can you change the angle of the push bar above the saw head..? I've see the push bar on forestry heads set much more fwd. to push brush over more..
There are 3-4 different settings. It is NOT movable by hydraulics.
Are you concerned cutting it high that you might punch a hole in tractor tire? Nice piece of equipment.
I’m cutting at ground level, so no.
It would be nice to see the grapple grab the trees with he limbs o and how it grabs and lifts them
Finally you got to the second tractor with a grapple idea! Sounds like a great combo. However, I would suggest two things: eye protection and a good pair of gloves. Always think safety!!😜
Regarding the clumps of trees... I wonder if in cases where the trees are limb locked if you could raise the cutter and cut the first layer of stems and then lower the cutter and take a section off the bottom of the cut stems' stump. Then allow the blade to move those sections off to the side as it spins. Being limb locked the cut stems may stay up such that you can then reach the stem behind them... I suspect that it would be faster than moving the tractor and might be worth a try.
I like what I see. we had our property logged about 18 months ago. what do you think it would do on bigger stumps? We are turning it into pasture.
Might work on larger stumps. Not sure. It can only go in 10” or so…. I suspect a 20” stump would be max.
@@TractorTimewithTim what do you suggest being on stumps that are over the 2 feet. I really need a good way of getting below The surface and to be total honest I would trust what you said over a lot of people.
How much money are you willing to invest? And what is the desired final result?
Saw as close as possible then A stump grinder would get it below grade so that you could drive over…but likely not grow good hay.
For best results, rent or hire a full sized excavator. Dig out the stumps.
Then, pile and burn them (which may take LOTS of effort since there will be dirt on them.
I would recommend the latter. Dig em out and be done with them!
would a hydraulic toplink aid in final stump removeal to a lower level?
Nice job. Great audio! Really like the variety of videos.
Wonder what would be faster, mulcher by itself or this cutter then mulching the dropped trees. IIRC, the slowest part of mulching was getting the trees on the ground.
Yep. Had the same thought.
I'm finding with my 3046r that the reverse peddle is to me to aggressive maybe be the word. To me it needs a finer action in the first 1/3 to 1/2 of the peddle travel. Then can ramp up and go. I didn't like the feel to the point I called the dealer to see if there was any adjustment in the electronics. Doesn't sound to be much if any they can do.
Tim, I have a video idea for you. I've read the loader manual several times and I'm sure I'd figure it out but I learn best by reading and seeing. Could you do one with the info for removing the 320 loader and making sure it's in proper adjustment?
Yes. The pedal is not perfect. The delay combined with the ‘aggressive’ behavior you mention makes it difficult to backup gently.
@@TractorTimewithTim I guess I thought the 3R series had a pedal adjustment like the Grand L?🤔 See now you have another reason to go to the finance committee to see Neil Messick. Lol 😆
I wonder if a hydraulic cylinder in place of your top link would allow you to lift and lean the trees over once cut?
Love your all’s videos.
Thanks for watching, Ross!
Great job Christy getting the awesome video while having mud thrown at you.
My vote is for getting a tractor for Christy too. Oh wait, who will film it. Let's make it a family affair and get everyone involved. LOL 😆
That would work great with a grapple on the front of the tractor so as soon as you cut it down you could just pick it up with a grapple and haul off to debris pile.
I have a small spot at my yard that needs this done. Can you bring it to Pennsylvania? It would only take about 1 hour to do. Lol. Just think of all the scenery you could take in coming over.
Will be in PA today :-) …but not with tractor
@@TractorTimewithTim you going to be at somewhere your meeting people? I’m not far from the dealership you did the mower race at.
No. Personal trip this time. Katriel graduating
@@TractorTimewithTim no problem in joy your time.
Wow, Tim I like it! I am also curious. I’ve been dealing with larger ash trees leaving stumps that were cut a foot or so tall. As you point out, using the stump grinder in this situation is a slow process. I see you cut one tree about 12 inches in diameter. With larger stumps, could one come in from another direction to cut a 24 inch stump? Cutting at ground level in the woods would eliminate using the stump grinder. Does it seem like that would do it? Again, kudos and thanks to Christy on great camera work that allows us to see how it works. Blessings.
Yes. I think 20” or so would be the max diameter…but I think it would do the job.
We can bring it up and try it if you like.
@@TractorTimewithTim That would be great. It would be interesting (for me anyway) to see how it would work. Thanks!
Were you in 4 wheel drive? saw the back wheels spinning and it didn't look like the front tires were moving. I could use something like that, but can't do it right now.
Yes. 4wd
Would love to see both the grapple and the tree saw working together
Yea. We’ll try that next time.
That tool works great !
Awesome looking machine nice job 👍👍👍👍👍👍👍
Thanks for the demo Tim. That little saw is bad to the bone. Great for when trees and woody growth are too big for rotary cutters.
Love your content Tim ! I have a John Deere 990 . You are very informative about products. Look forward to your videos thank you from New York .
This strikes me as the sort of attachment that can do some specific tasks REALLY well, but for broader applications there are better solutions. That said, I can think of some tasks on my property that this thing would be PERFECT for! Thanks for another great video!
Nice video tim and kristie and I like that machine, it makes very nice work
Tim, looks like a great attachment. Somewhat concerned with the lack of safety glasses. Never know when you'll get a branch in an eye!
I clicked the link for greendealer, but I don’t see the listing for the tree saw. Do you have another link?
Give me a few days. Sorry.
@@TractorTimewithTim No problem!
Hey Tim, do you have an opinion on the Sidney Arrow Tree Saw? It seems like it can cut wider diameter trees with the same amount of HP.
Interesting. It has less teeth. It is lighter. Not sure either of those are good…but it does have a larger diameter cutting wheel.
I would be concerned about trees as large as the one in their video…what if it decides to fall your way??
@@TractorTimewithTim These are all good points! Thanks Tim, I appreciate it!
@@TractorTimewithTim Last question, could this Baumalight model technically cut tree wider than 10 inches if I cut from both sides?
Yes.
I would like to see a test of a PTO wood chipper. I have a bunch to cut and chip. I have been looking at the WOODMAXX WM-8H.
I have a woodland mills wc88. I like it but i dont love it.
It works alright. If the stuff is real branchy you have to do a lot of annoying and time consuming trimming …. If you can make a fire somewhere and use a grapple to pile it up you might be better off ….
The chipper is very manual labor intense ….
That is my experience with a chipper. Way too much work! :-)
@@TractorTimewithTim I can generate a lot of brush around my land every year and mulching or burning is not always practical. I also just ordered a sawmill so some of the scrap will be chipped for mulch to rot down for the garden.
Think the smoking is just the tree after being cut riding on top of the spinning disc getting hot. Looks to do great on ones you can get to the stump fairly easily. When you really have to bury the tractor and yourself into a huge deep bush to get to the stump don't think would like that. However I do think it has it's special place in certain jobs.
Seems like having a grapple on at the same time would be ideal. Pull the first trees cut out of the way and go after the others.
Awesome video Tim thanks for sharing buddy 👍
Good assessment @18:00 minute mark, Tim. Looks like a solution looking for a problem. Most of what you went over, a good brush hog can handle and pulverize, except for the bigger trees, but a chainsaw and excavator, or stump grinder would take care of them. Nice demo though.
Disagree on the bush hog part. have already done all I dare with my brush mowers. Cannot get this bigger stuff.
Tim, you neglected to mention anything about the adjustable push bar (black) above the saw blade.
Tim that saw with another tractor with a grapple would clear that insanely fast. And the good thing is you already have another tractor operator / camera lady. 😂
Yep! We put a grapple on this machine and that helped a lot
Nice camera work.
While it might be big for a 3series. A 60" Brown Tree cutter could do the site prep level tree removal and breaking up of material. Think they need 50hp min. Maybe a five series.
I like it. I don't need it. Enjoyed watching you play with it.
Tim, not to be Safety Sally, however you should have some sort of glasses on for sure, be it sunglasses or safety glasses. Especially when you go back into the brush with limbs sticking everywhere, I would hate to see a branch stick you in the eye, or a piece of wood! Safety First! 😎👍
Cut out what you need and then come back with the mulcher. Mulcher taking care of the trees that are on the ground.
I noticed that you chose a bit larger tractor than your "usual" 2035R tractor. Good lookin' tool. I hope the local equipment rental company considers adding this tool to their inventory.
I’ll try it on the 2038r sometime in the future.
Great video Tim. Seems the attachment almost needs some teeth on top and bottom of the blade and maybe offset to one side would be nice to keep the tractor out of the branches.
The only thing I think would make it even better is if there was some gear box protection. It looks pretty vulnerable.
Maybe, but it is HUGE! Looks crazy tough!
Are you going to do a 3rd function or a diverter on that tractor? Might be a good opportunity for a side by side comparison... Honestly, I love the 3rd function, but if I had it to do over again, i might be more inclined to get a diverter valve instead. The tree saw looks AMAZING, by the way.
When you mentioned backing into it then turning around to clear it with the grapple, I thought the dream team would be 1 tractor backing in with the tree saw and 1 perpendicular to that to sweep away the cut trees each time you pulled forward to reposition for the next run, and sure enough, you mentioned the possibility nearer the end. :)
Maybe you could feature a Mirror attachment that allows you to not have to twist your spine around to cut behind you!!! ...There has to be one out there right?
MuddsCustoms.com use code ttwt for a five percent discount!
Tractors also need a front end PTO so many of these attachments can be run in front of you not always behind you.....
Does it look like it works better for larger trees and not as good with small 1" but densely populated brush?
Not sure. I need more practice. It was so muddy that day. I think the mud contributed to the challenges
Yes, but the mulcher attachment has the same problem, just in reverse order. Seems to me if you were buying 1 attachment this would be a much more viable solution as so long as you had the pto hp you could probably cut up to 18"-20" diameter trees. You ain't doing that with even a $30k mulching head on a 100 HP track loader.
During most of the video I was wondering why you weren't using one of the 1025r's with a grapple. Isn't your trailer large enough to carry both machines? Of course, a grapple on the one machine would make it so much easier.
Do you get the impression that the 1025r could handle this new cutter? (not talking about Johnny X)
We’ll try it.
adjust the frame back a couple of positions will help alleviate the problems
Seems to do a fantastic job!
It seems that this machine isn't so much as a thick brush type of clearing, but more accurate going after single trees, something like a feller buncher a logging company would use. Maybe use this in tandem with the mulcher. Use the mulcher first and clear the small stuff first then go after what is too big for the mulcher with the saw.
That might be a good way to handle it!
Thats the same concept as a feller buncher there are some good ones made by john deere the model 859m is a really cool machine
Just curious, were you not using the anti stall function on the 3r or was it just not working as it should?
We love ya'll Tim and Kristi. Kelli and I would like Kristi to wear eye protection, maybe a welder's mask or a medieval knights shield getting that close to that thing! Hahaha!
That looks real handy. I would love to demo one in the fall