Skirting board, non 90 degree internal corner, obtuse angle scribe/cope cut. Bay window conservatory
HTML-код
- Опубликовано: 22 янв 2020
- In this video I demonstrate how to scribe/cope one piece of skirting board over another in a non 90 degree angled wall. Otherwise known as an obtuse angle. Step by step instructions.
Blog to accompany this video.
spendtimesavemoney.com/index.p...
Visit our website for more DIY tips and step by step articles.
spendtimesavemoney.com/
If you would like to help fund this channel and help me to make more and better videos then any donations would be greatly appreciated via paypal or Patreon.
paypal.me/spendtimesavemoney?...
/ spend_time_save_money_diy
Are you a keen woodworker? Try the link below. You won't be disappointed. stsmdiy.tedsplans.hop.clickban...?tid=track
Like, share, comment and subscribe.
If you are a youtuber yourself try this link to Tubebuddy. It really helps boost you videos and channel!!!!! www.tubebuddy.com/Spendtimesa...
Tools used
Mitre saw
amzn.to/2RXkGtJ
Panel saw
amzn.to/30Nf7Sx
Coping saw
amzn.to/38z2Zaj
Coping saw blades
amzn.to/2RLimpu
Sliding bevel
amzn.to/2RjELem
Combination square
amzn.to/2tzHvLP
Clamps
amzn.to/2GonxpP
Roller stand
amzn.to/2RkPsgI
Tape measure
amzn.to/3aEOzaH
Spirit level
amzn.to/2TV9Dnd
Comment and let me know how you get on with your projects and if my videos helped you at all. After all that's why I make these videos!
paypal.me/spendtimesavemoney?...
/ spend_time_save_money_diy
/ spendtimesavemoney
/ spend_time_save_money
pop up courtesy of: ruclips.net/channel/UCF0z... 
Хобби
Thanks for watching my videos 👍🏼
Please leave a comment and be sure to like, share and subscribe to help the channel out 👍🏼👍🏼👍🏼
You sir are a magician thank you for your teachings
What an absolute star you are! I have been struggling to do this very carpentry thing all afternoon (the language was getting a bit choice…). Thanks to your excellent and clearly explained video, I’ve now successfully done it! Thank you so very much.
Great video, straight to the point, no guff or messing about, clear and precise information and explanations.
I try to just give out the information that the viewer is looking for.
Thanks for watching and if you'd like to subscribe to my channel that would be great 👍🏼
Great vid will help alot when I come to fit around bay window area 👍
I'm a carpenter of 17 years and this video is excellent, I specifically like the drawing of parallel lines to get the exact angle
I used your video to help me fit picture rail last year. Back again to freshen up my skills for a different room. Thanks. Great tutorial.
Returning customer. Great to hear my videos are helping you 👍🏼
Perfectly explained, good speech rate. you are so well controlled in all aspects of this video. very skilled and taught me exactly what i needed to know. thanks friend, if you were here i'd throw you a beer.
That's a beautifully looking inside angled corner there. Saving this video for future!
It took me a LONG time to find this video. I’m installing baseboards for the first time in my life and I have an obtuse inside corner like this
Ashley Meltcher before I made the video I was surprised I couldn't find another video for obtuse angles. I hope my video helped!? Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
You've helped me out a lot with my house renovation.
Retromeccanica glad to hear that! Helping people like yourself is why I created the channel. I have also created a website/blog which you may benefit from. The link is in the description.
Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼
Did this tonight, worked a treat! Cheers mucker.
Cheers mate hav flooring and skirting all ahead of me feel a lot more confident now with your help
Glad my videos have given you confidence and when you've done a great job you will have a whole lot more confidence 👍🏼
Hell bells is that how you get an awkward corner done. Hope I never have to do one but at least I now know where to look. Your videos are brill Mate.Good tip with the tape measure!
Jeff it's not as difficult as it seems. Glad you liked my tip with the tape measure. Thanks for watching and remember to like share and subscribe to help the channel grow 👍🏼👍🏼
Fantastic, you keep it simple, love all your skirting videos, best I have seen on RUclips.....
spud murphy73 thanks for the compliment. I try to make it clear for anyone to follow no matter what their ability level is. 👍🏼
Your hand cut is more accurate then saw itself. Love your videos mate
Very nice of you to say so. Glad you enjoy my videos, hopefully many more to come.
Thanks for watching 👍🏼
Thank you for making this video. Now I can tackle my bay window. 👍🙏
Mark C good luck and let me know how you get on 👍🏼
Looks so easy once you know how. Great video 👍👍
Dark Farang thank you, it's not the easiest job to do but it's the right way to do it.
Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼
This is what I have to do at college, very helpful 👌
Very well explained as usual
The proper way to do it! Well done
tomnikesb thank you my friend. It's not the easiest job to do but it's the right way to do it.
Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼
these are the best vids on this by far. bought a double bevel evolution today and been practising with some cheap ogee from wickes. so far so good. cheer fella top stuff!
Glad you found my video useful. Let me know how you get on 👍🏼
Super helpful, cheers
👍Good instructions, saving this in my playlist📥
Best wishes
Pete.
pete T. Thanks for your comment and putting me in your playlist.
Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼
I have no idea what you did there mate, but it was brilliant... 😁
Some great tips! Thanks
Alun Allcock Glad you liked my top tips.
Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼
Very well explained well done.
Glad you think so! Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
This accent is just pure joy! Also good content, mate!
Glad you like my scouse accent and my videos.
Thanks for watching and don't forget to like share and subscribe to help the channel grow 👍🏼
This is good stuff! Its helped me. Thanks for sharing and have a good weekend 👍🏼😎
Thanks for the video, been very helpful
Glad you enjoyed my video. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
Wonderful. Thanks.
Glad you enjoyed my video.
Thanks for watching and don't forget to like share and subscribe to help the channel grow 👍🏼
Realy good video especially how to divide the angle i only knew how to do with a compass and your way is easier
Martin O thank you, everyday is a school day my friend. Glad I could show you something new.
Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼
Spend Time, Save Money, DIY keep up the good work already subscribed mate I enjoy the videos. Always good to learn different ways of doing these jobs
Fantastic
Garviel Loken Glad you enjoyed the video.
Be sure to like, share and subscribe to help the channel grow 👍🏼
Nice.
Glad you enjoyed my video.
Thanks for watching and please consider subscribing 👍🏼
Very interesting😀
Glad you found my video interesting. It's one of the more difficult jobs.
Thanks for watching and don't forget to like share and subscribe to help the channel grow 👍🏼
Top fella thanks very much mate. For the first time in my life I actually understand how to fit ANY type of boarding into a difficult corner. Tried it on my man cave fitting thermal boarding on to the walls......Cock on son. 👍👍😀😀😀
Glad I could help you out! Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
Hi mate great video, I had a job today fitting skirting on a 5 side bay window, each were less than 30° angles on each corner, I was told by the owner that they had carpenters out that wouldn't even touch it, I now realise why 🤣 very very difficult, also didn't help that the walls were bowed and twisted slightly and had to scribe behind each each edge about 35mm
To me this is basic level 2 carpentry. But it's amazing how many people call themselves carpenters and they can only do billy basic work.
Thanks for watching and don't forget to like share and subscribe to help the channel grow 👍🏼
@@spendtimesavemoneydiy will do, thanks for the video.
@@spendtimesavemoneydiy how many levels are there?
Really well detailed description. This will give me the confidence to follow your advice for when I come to do this. It's also given me a much clearer understanding of the usel of the bevel.
Many thanks for taking the time to do this. I have subbed.
Super helpful - thanks for the vid
Glad you enjoyed my video.
Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
DIY question: Apologies if I missed it but what is the purpose of making the very precise bevel cut (from around 4 mins) prior to scribing? The cut is a perfect dissection of the internal angle, achieved through the very neat drawing trick with the level, but, if it’s going to be back cut, would a 45 degree cut not been just as effective at exposing the profile prior to cutting? Super helpful video though so many thanks!
If it's cut at 45 degrees then it will fit neatly into a 90 degree corner. The amount of profile that is cut away changes with the different angles. So the bevel cut to expose the profile is half the angle of the corner. Hope that makes sense.
Thanks for watching and don't forget to like share and subscribe to help the channel grow 👍🏼
Keep the vids up there a good watch angles are my downfall I do alot of jobs myself around the house are you doing any videos on fitting a kitchen
I am about to build an extension for our kitchen so I will be making and videoing the new kitchen.
Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
Great video! I'm confused at 50 sec when you said the angle was 45 degrees. Am I missing something because it is clearly an obtuse angle? I have a sliding bevel, but I didn't know how to use it; now I do! Nicely paced video. Thank you!
I think I understand now. It's 45 degrees beyond the 90 degrees.
If you cut a piece at 45 degrees it would fit the angle to simplify for viewers. If I'd have said 135 degrees I think it would have confused people.
Glad you enjoyed my video though.
Thanks for watching and don't forget to like share and subscribe to help the channel grow 👍🏼
Hi
This video is really helpful
I’m just not understanding the measurements for when you turn the board over.
And from the 22.5 degree when you use the bevel to draw the lines.
Any more info
Would be appreciated
Thansk
If you have a look on my website I go into more detail. The link is in the description. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
Great video, im still struggling.
A 45 cut fits flush to the wall.
Im striggling to get the back cut right.
What kind of saw did you use to get the straight cut?
Thanks
I just use a bahco fine toothed saw from screwfix.
I'm sure you'll do a great job.
Let me know how you get on.
Thanks for watching and please consider subscribing 👍🏼
nooice!
I'm stuck on this exact angle, kept trying to cut the degrees to meet with a waste piece but just cant get it right. Going to scribe it now and get it right.
It's not an easy cut but it's worth doing right. Let me know how you get on.
Thanks for watching and don't forget to subscribe 👍🏼
genius
MrZedKay thank you my friend.
Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼
Wow
Giulio M glad you enjoyed my video. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
Pure coping magic. None of this flap disc on grinder or coping foot.
Old methods are sometimes the best. Using a flap disc just creates too much dust. I've not heard of a coping foot before.
Thanks for watching 👍🏼
Sir what is the material of this skirting? And In window casing, same material is being used ?
Have anyone told you that you look like a young andy sugden from emmerdale.
Hard Worker haha yes I have been told that a couple of times and the drummer from Linkin Park. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
Is there a power tool or power tool fitting that would replace the coping had saw?
Eddie Warren many people use a jigsaw to replace the coping saw but a jigsaw would struggle to get the angle needed hear. My advice is master the coping saw and it will be just as fast as a jigsaw! Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
@@spendtimesavemoneydiy Thnsks for the advice.
Eddie Warren no problem, anytime 👍🏼
Sorry couldn’t really see pencil marks on back of skirting but still enjoyed video 👍
Alan Turner apologies for the faint lines. When I was filming I didn't realise the lines weren't showing up too well.
Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼
you can get a brick behind that skirting board you gunna fill it with dec chalk. lol.
Try your best and caulk the rest 👍🏼
How did you fix it to the wall did you glue or nail
Glue and pin . But looks like may be brick behind the wall so would have to plug and screw
It's a brick wall but I always recommend to plug and screw skirting boards to walls. I actually have a video about it.
Thanks for watching and be sure to like, share and subscribe to help the channel grow 👍🏼
Spend Time, Save Money, DIY I bought Mdf skirting from online pre primed , the company recommended using adhesive, it’s an old 1970 house and the guy that fixed it drilled out some very big holes and countersunk the screws ,they do not manufacture a good filler for MDF only the two part mix which is difficult to use, I rang the company that makes the skirting to see if they had any ideas They said no ,so I have quite a few big holes to fill any ideas ?
Joyce Millichip if you watch my video on how to paint mdf skirting boards that should tell you all you need to know.
Let me know how you get on 👍🏼
Spend Time, Save Money, DIY thank you I will I bought them like that because I didn’t want to paint them as I have a lot of other stuff I am doing in the house. I will find the video and watch it thanks
Why not do a straight cut on both using the angle of the wall?
Bolter99 if you were to do it like you suggested the joint would always open up. This is the correct way to do an internal corner. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
@@spendtimesavemoneydiy Yeah. That's what caulk is for!
Hello pal.. do I use the same technique for pencil round on an internal corner ? Cheers 👍🏼
Scott Kinder yes, it is exactly the same method for all profiles of skirting board. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
Is this the guy from emmerdale
You're not the first person to say I look like Andy Sugden 😂
Great video but cant see your pencil lines at all 🤤
Sorry about that. I'm still learning about video making so I'm learning from these mistakes. Thanks for pointing it out and thanks for watching, don't forget to subscribe 👍🏼
do you have a contact plz I'm in liverpool and need some skirting done? thx
Sorry I don't work for other people. Thanks for asking though
Traducirlo en español
Why would you measure the angle and cuttng it the first time if all you need to do is cutting it to any angel up to 45 and scribe it?! Excuse my English
It's killing me slowly hearing you call an obtuse angle 45° lol
I know I'm not the best at talking to a camera but as long as I help people to get the job done well I'm happy. Thanks for watching and be sure to like share and subscribe to help the channel grow 👍🏼
Wood filler mate