Stanley SharpShooter Manual Staple and Brad Gun close look
HTML-код
- Опубликовано: 21 фев 2015
- Get it here www.amazon.co.uk/gp/product/B0...
Heavy-duty anti-jam staple & brad gun
Equipped with an Aluminium cast housing
Greater durability and long lasting qualities.
Easier to store in toolbox etc.
Aircraft Aluminium
Accepts Brad nails 12mm-15mm
and 6-14mm Type 4/11/140 or G types staples
Model No: 0-TRA700 
Наука
Hey guys to load staples: open the cartridge thing, drop the staples retangle in, then push the cartridge thing back in place! HOPE this helps!! Lol, I hadn't used my Stanley gun in a WHILE & forgot... this video didn't help directly, but the instructions portion, allowed me to figure it out! GOOD LUCK!!😆
For first time to me this video helps a lot.
I'm dumber than you. I totally forgot how to put the staples in. I kept thinking I'd lost the little spring thing that goes in after the staples do; the old style. Just for showing how to fill the dang thing you saved me $15. Most appreciative. It's yet to let me down... ...now that I can refill the sucker again. Last used it two years ago.
Thanks
U don't bother showing how u install the nails!!!!!
Yeah it's kinda weird how you put a rack in.
THANK GOD 4 comments, NEXT VID!!!!
I'm new in this, so this video helps me a lot. Is only nails but for me is a whole world 🗺. Small things count too. Now my chair will looks like a new 🆕.
Where did you get the carrying case? I can’t find it in Amazon
Thanks for great video! 10/10! 👌
I just found a stapler gun..without instructions,the tricky part for m.is loading the nails..wud love to know tht..
This video took waaaaay longer than necessary…
I have arrow etf50 how change from staple to nail gun
waste of time...
9 minutes of review and you use not even 1 staple to show a staple gun...
6:50
6:32 he shoots one
He loses it the wrong way 😂
Tienen algún video para la puntilla mejor explicado no entiendo donde van puestas
you have not reviewed the same product that you have provided the amazon link to. this is the tr250 model NOT the tr150 model you have provided the link to
Buen video! Gracias
Haha were you being serious trying to load the staples from the back?!
Sirve pra pared?
How the hell did u get the staples in? Just cuts to it already inside seesh the one time im stuck without real tool
*s
Hola, podrías decirme cómo se colocan los clavos? No se ve en él tutoríal. Gracias?
.
7:42
Los deja echados a los costados con la punta mirando para fuera.
How much
It's not the machine that matters.
staples and dimensions that are important in the video...
What’s the + and - button do in the rear ?
+/- will adjust gap on top of the nail/pin or how much nail remain out of the wood. Like if you staple a cable.
@@boogiewoogie2979 gotcha so it sets the depth to be counter sunk or not
Is this supposed to be a demonstarion
Et 9 minutes plus tard je ne sais tjrs pas où il fait mettre les pointes 🤦♀️🤦♀️🤦♀️🤦♀️
And the nails like heck do they put on it? if it can be known ...
hi Unpack Guy. is there a repair manual for the Stanley SharpShooter manual stapler. my won't engage anymore. thanks in advance.
Tukky Mann Okay I was hoping I could also find someone whose broke that at least was recent. How did yours break? I’m trying to fix my dad’s but I don’t know which way the spring goes. I can elaborate later if you want; just wanna know how yours broke so maybe we can collaborate.
you have to watch 5 mins of packaging before you see the cartridge being opened.
I want 5 mins of my life back.
thanks
This video helped because I don’t have my instructions, but this video is just to much showing the staple gun before it’s even used
So you decided you wanted to read the instructions on a video?
@@Chewy_GarageBandDadm
Get on with how to load the stapler!!
Please and thank you?!!! Thee ONLY reason I am here!!
the staples dont go inside
Grazina Venskaviciene Exactly, showing the staples on top of the slide is just confusing as thats not how they load (unless I'm missing something!). Then to add to the confusion you never see the gun being properly loaded with slide back and staples loaded into the cavity.
That's the wrong way to load it. You have to put it inside and then close it. If you need help let me know.
@@mr.torrestv THANK YOU SO MUCH
Exactamente corta la imagen cuando mete las grapas a la engrapadora
i rather watching a photo of this staple over 10 minutes than this videos.
thank you for showing the instruction paper
No se muestra cómo cargar los clavos
Las grapas no van hai
Cómo desarmar
Showing wrong loading method. Dont mind.
I watched this video and was so mad!!Aparently I wasn't the only one who felt this way!! Lmao
This dummy didn't know how to load the staples.. He cut the tape.. The staples do not go in that way at all!!!!
Then how does it go in cause my dumbass doing it his way and got staples flying everywhere 😂
Call this a review????
tbk
I didn't hey the nice case...🤔
Ma a che serve questo video?
Waste of time video, don't bother watching.
BIG THANKS!!!
Some verbal instructions would have been helpful.
Wrong way to load it. That is NOT the way to load it! You have to put it in and then close it.
Who is videoing this? Shakes the clown?
at 6:03 you load the staples incorrectly. Afterwards at 6:14 you shut the staple slider without showing how you properly loaded it by dropping the staples into the open chamber. Thumbs Down.
Y los clavos.
8 minutes too long.
Equipo lo. Compre y ya no.Me funciona. Tenía una pieza de plástico y se cristaliza totalmente destrozado... perdida de dinero...
No sirve para clavos
6 minutes for us to get to the point...
My Stanley broke at 5 months old. I occasionally used it. Do not buy one!
I've had mine for more than 5YEARS and it just broke after lots and lots of upholstery and other crafting work. Just loved mine
better do nothing
wtf!
Dumb staples won't fit, guess it only uses 3/8 sizes, so stupid!!
This video was like pulling teeth I'm sorry to be negative but you're going to show over 6 minutes of the package and the gun itself and then you don't even speak about loading you just put it in and you're done
En este vídeo no se ven como se colocan la ágrafas y los clavos !!! No sirve para nada !
Vuélvelo a hacer 🎯😹
Note: Aircraft Aluminum. In order for Aluminum to be "Aircraft Aluminum is must be tested by the FAA and then you get a Type Certificate Data Sheet so you can use it on aircraft. This process costs about $900 to $5500 why would the Stanley Moron engineers go thru this process?
stanley probably paid that in one go for their product. and not per each tool
Why do you do reviews if you don’t show loading staples or brads.....lol useless review.
You waste to much time showing the package.
Just trying to consume our time thats all
God, this is rubbish. How not to make a video.
You talk too much
Dumb music sucks
What a waste of time
Terrible vid