00:00 Intro 00:14 Creating a sketch on a base plane, explaining differences to global coordinate system 01:32 Part: Extrude to create example geometry 02:00 Attaching a sketch to an existing face 03:31 Moving the sketch 04:02 Attaching a sketch normal to an edge 06:11 Moving sketch to other end of edge 08:06 Attachment error example 09:21 Translating sketch to a vertex 10:03 Sketching example loft path 10:55 Attaching and orienting example loft profile to path 11:30 Clearing sketch attachment while maintaining placement 12:31 Sketching example loft profile 12:55 Translate Origin on detached sketches 14:23 Creating scaffolding sketches as attachment points for another sketch 16:35 Attaching sketch with Plane by 3 Points 18:39 Part: slicing object with newly attached sketch 19:25 Changing sketch to change the slice 20:20 Abbreviated process of 01:32 - 20:19, but using Part Design (extremely similar) 25:20 Outro
First time I actually paid money to author after watching a video. But the contents here are so valuable to my FreeCAD learning journey that it was well deserved.
Hi Darren, Your FREECAD videos are amazing. Actually, for a freecad beginner as me, your tutorials are pretty useful. Thanks so much for your help, I really appreciate it. 😊👍
This video and the Global/Local Coordinate video should be mandatory viewing before thinking of any designing. Getting a solid understanding of these fundamentals will save a lot of head scratching when your designs become more complex.
I used to enjoy freecad when it was more intuitive (older versions), but would have given up on it as it gets more complicated if not for the help of your videos. Ta Thx!
Thank you, glad you enjoyed. I will doing some more videos in the future that will be using this a lot. Come to think about it, my next surfacing video will be 😊😊
@@MangoJellySolutions I think my over all problem was trying to loft between two sketches which would have created two parts at once using the Parts Work Bench. Once I deleted half of the sketch, the problem was solved. I was trying to create two parts at once from the loft between the two sketches. I lofted the one part then duplicated it rather then creating two more sketches for the other half.
That's great to hear, I was in two minds to post this one first before posting my next instalment of learning freecad for beginners as this gives the basics of what is going to be used in my next video. I am now thinking it was a good choice. Great to hear you wil make use of it. And thank you for your comments.
Darren, I have been watching your helpful videos for a while now, I have come a long way because of your easy to follow tutorials. I have been working on modelling a Lancaster bomber using 3 blueprints. I am slowly getting there, but I know with your knowledge, you could do so much better than me. Any chance you could show us how you would create this model? I'd understand if you can't because you must be awfully busy.
You can save a step by drawing the sketch with one line selected from Sketcher, then you'll only need to add the 2nd reference, which will be line 2. But it was good to see the full explanation for a complete understanding.
Thank you, that's really helpful! I've never noticed 'offset' in the bottom of the 'Create Sketch' window before. I've tried it and it adds to 'Z', e.g. normal to the plane, and sets the attachment to 'Deactivated'.
It is not clear to me, why @3.06 the center of XY axes is off the top ridge of the block and then @ 5:30 the center of XY has moved to the end of the mapped line whereit meets the end of the top ridge. When the map mode was flat surface, why the center was positioned on the same edge as the edge which was later re-mapped but just little bit off the end of that line/edge. From what I have learned in the school, the plane runs from infinity to infinity in any direction.....so unless you specify the center and the direction of XY axis for the potential sketch the plane doesn't have any center and axes. Same goes for the line. The edge is actually not a line but a line segment and so I would understand the center of the XY axes is at one of the end points...but you did not specify which one and you did not specify XY orientation....So it is obvious, that the system(FC) runs under some sort of assumptions and we need to find, what these assumtions are or at least have a link to where these assumptions are explained! Without that it looks to me very ambiguous.
I think this topic is very confusing, (good job on the explanation though). I wonder if as a video topic you could create something that would absolutely need these techniques.
Thanks, it is very confusing as there are so many options. So, little story, my next learning freecad video uses it. I create this one after and realised how closely related they were. I was in two minds which one to release first. It was originally to follow on from a previous video regarding LCS and GCS. I am thinking of placing these videos in the learning freecad playlist at the points we're they are needed.
A QUESTION: In the model tree the hierarchy is unnamed -> sketch. The sketch is then extruded in Part workbench and a second sketch created (the circle). I lost track of what I was trying to do but it wouldn't permit a modification to my circle because it wasn't 'attached to a body'. There are some youtube tutorials where the model tree is unnamed -> body -> sketch, and then I don't get that 'unattached' error message. Why is this tutorial missing the 'body'?
00:00 Intro
00:14 Creating a sketch on a base plane, explaining differences to global coordinate system
01:32 Part: Extrude to create example geometry
02:00 Attaching a sketch to an existing face
03:31 Moving the sketch
04:02 Attaching a sketch normal to an edge
06:11 Moving sketch to other end of edge
08:06 Attachment error example
09:21 Translating sketch to a vertex
10:03 Sketching example loft path
10:55 Attaching and orienting example loft profile to path
11:30 Clearing sketch attachment while maintaining placement
12:31 Sketching example loft profile
12:55 Translate Origin on detached sketches
14:23 Creating scaffolding sketches as attachment points for another sketch
16:35 Attaching sketch with Plane by 3 Points
18:39 Part: slicing object with newly attached sketch
19:25 Changing sketch to change the slice
20:20 Abbreviated process of 01:32 - 20:19, but using Part Design (extremely similar)
25:20 Outro
First time I actually paid money to author after watching a video.
But the contents here are so valuable to my FreeCAD learning journey that it was well deserved.
Thank you for the support and kind words. I am glad your finding these videos useful.
Hi Darren,
Your FREECAD videos are amazing.
Actually, for a freecad beginner as me, your tutorials are pretty useful.
Thanks so much for your help, I really appreciate it. 😊👍
Thank you so much for sharing your experience. I really appreciate that :) :). Welcome to the journey.
Mango.Jelly is my favorite workbench
This video and the Global/Local Coordinate video should be mandatory viewing before thinking of any designing. Getting a solid understanding of these fundamentals will save a lot of head scratching when your designs become more complex.
So glad it was found to be useful. I was in two minds wether to do this video. Glad it's helped.
Darren, once again, thank you so much for your help.
My pleasure! It's one of the tricker areas of freeCAD.
Thanks a lot for all these explanations, i realise that Freecad is a real super power software (sometimes buggy if you don't use it normaly).
I used to enjoy freecad when it was more intuitive (older versions), but would have given up on it as it gets more complicated if not for the help of your videos. Ta Thx!
This video is always a great refresher. It should become a primer for CADing.
Thank you, glad you enjoyed. I will doing some more videos in the future that will be using this a lot. Come to think about it, my next surfacing video will be 😊😊
@@MangoJellySolutions I think my over all problem was trying to loft between two sketches which would have created two parts at once using the Parts Work Bench. Once I deleted half of the sketch, the problem was solved. I was trying to create two parts at once from the loft between the two sketches. I lofted the one part then duplicated it rather then creating two more sketches for the other half.
Thank you, I didn't know it was possible to attach a sketch to an edge or a vertex; a new world of possibilities!
I have so many things to share regarding this package so watch out for more. Glad you enjoyed 😊
Wow
This video, alone, transformed the way I use FreeCAD.
Thank you!
That's great to hear, I was in two minds to post this one first before posting my next instalment of learning freecad for beginners as this gives the basics of what is going to be used in my next video. I am now thinking it was a good choice. Great to hear you wil make use of it. And thank you for your comments.
Thank you !
Excellent video. Every time I watch one of your videos I walk away with more confidence and ability
Great to hear! This is what it's all about, accelerated learning so you can get stuck in and start creating, thank you for the kind comments :)
Very helpful!
Darren, I have been watching your helpful videos for a while now, I have come a long way because of your easy to follow tutorials. I have been working on modelling a Lancaster bomber using 3 blueprints. I am slowly getting there, but I know with your knowledge, you could do so much better than me. Any chance you could show us how you would create this model? I'd understand if you can't because you must be awfully busy.
Good timing for this topic as I was just thinking that I needed to understand it better.
Great to hear 😁 The next learning freecad for beginners video will be using it for a practical application
You can save a step by drawing the sketch with one line selected from Sketcher, then you'll only need to add the 2nd reference, which will be line 2. But it was good to see the full explanation for a complete understanding.
Thanks!
Thank you so much 😊👍
As always, I learned something new from watching your videos. Thanks for these!
Great to hear 😁👍 thank you for the kind comment
Thanks! You cleared up more things for me.
Great to hear 😁
Excellent video.
Thank you, that's really helpful!
I've never noticed 'offset' in the bottom of the 'Create Sketch' window before. I've tried it and it adds to 'Z', e.g. normal to the plane, and sets the attachment to 'Deactivated'.
THANK YOU!
Thank you 🙂
It is not clear to me, why @3.06 the center of XY axes is off the top ridge of the block and then @ 5:30 the center of XY has moved to the end of the mapped line whereit meets the end of the top ridge. When the map mode was flat surface, why the center was positioned on the same edge as the edge which was later re-mapped but just little bit off the end of that line/edge. From what I have learned in the school, the plane runs from infinity to infinity in any direction.....so unless you specify the center and the direction of XY axis for the potential sketch the plane doesn't have any center and axes. Same goes for the line. The edge is actually not a line but a line segment and so I would understand the center of the XY axes is at one of the end points...but you did not specify which one and you did not specify XY orientation....So it is obvious, that the system(FC) runs under some sort of assumptions and we need to find, what these assumtions are or at least have a link to where these assumptions are explained! Without that it looks to me very ambiguous.
MJS ! King of Cad ! Thank you ! I so needed this movie ..I was so confused lol So mapping a datum plane would use the same method......?
Glad I could help, yes if you wanted to use datum plane would use the same method for mapping. Great to hear things are making sense.
Awesome
I think this topic is very confusing, (good job on the explanation though). I wonder if as a video topic you could create something that would absolutely need these techniques.
Thanks, it is very confusing as there are so many options. So, little story, my next learning freecad video uses it. I create this one after and realised how closely related they were. I was in two minds which one to release first. It was originally to follow on from a previous video regarding LCS and GCS. I am thinking of placing these videos in the learning freecad playlist at the points we're they are needed.
Question: How is this attachment mode affected by the topographical naming problem?
thanks, super helpfull!!
You're welcome!
Is a "scaffolding sketch" a specific thing or just a use convention?
A QUESTION: In the model tree the hierarchy is unnamed -> sketch. The sketch is then extruded in Part workbench and a second sketch created (the circle). I lost track of what I was trying to do but it wouldn't permit a modification to my circle because it wasn't 'attached to a body'. There are some youtube tutorials where the model tree is unnamed -> body -> sketch, and then I don't get that 'unattached' error message. Why is this tutorial missing the 'body'?
Valeu!
Thank you so much 😊😊😊👍🌟