The really interesting thing about the 365 XL and now the 'Macro' variant is that it's only an inch wide on the frame end and 1.1" wide at the magazine end of the grip. I've got a couple of Wathers - P99 and PDP - as well as an FN 509T for reference. The Sigs feel like a full-size gun in the hand, but its widths allow Appendix and even OWB strong side cayy that almost disappears. Theres nothing wrong with full-size duty guns, and for open carry, they're great - I know. However, concealed carry is the default in my state, and itty-bitty concealed carry pistols in past have been an exercise in compromise.
Honestly, I'd love a DA/SA micro-9mm that uses the same magazine family as the p365. I'm sick of buying a whole new universe of accessories for each gun I buy.
no kidding.. seems the only one that comes close is the Beretta cheetah but that's in 380. there's also the cz Rami. but a p226 in micro 9 size that takes 365 mags.... perfect
I love it, but difficult to find a solid holster for it. All of the macro holsters are too thin. Red Hill Tactical and Black Scorpion Gear are the only ones I've seen verifiable purchases from that can actually fit it. The more well-known brands like T.REX ARMS, Alien Gear, and Tier 1 do not carry an IWB holster for it.
Yes! These are both dead on. Remeber that was the point of the FCG?! Now they just make new guns instead of frames haha. Like they realized "selling less guns isn't the point bois"
Can y’all please make an updated SP2022! Would love to have a polymer hammer fired gun from y’all that comes optics ready! It would also be incredible if y’all could make it have a fcu
@@0DSantiag0 I hope so because if it’s mass produced then hopefully the price will come down. I know they sell them on Sigs website but always out of stock
Sweet.... I mean, $1300 is steep for the average Joe. I'm still trying to trick out my P229 Legion. For that price I can get a threaded barrel, modified slide, and romeo optic. So if I fall into some extra $$ I'd most definitely get one of these for my daily carry.
I am not at all familiar with sig sauer so is it at all possible sig could say what caliber these ads are? This is the 3rd ad I’ve seen here for different guns, no mention of caliber, etc! How about a little more information?
Damn time to spend more clams lol right my edc is the regular p365xl I was planning on just buying all these parts and just remodeling my pewpew on my own
That's the only thing that held me back from buying this. The AXG grip is cool, but otherwise, I basically have the same gun already. Except my slide is the spectre comp version.
For only 3 times the price of the base 365 You get a cool coin and a membership to the legion club we're you can have the privilege of buying SIG Sauer legion brand stuff YAAAAAAAAAAAY
Or just get a 320 axg at that point cuz how long do u even want your carry gun? 4.5 inch barrel, super-carry-duty, legion, tac ops, elite, nightmare 24/7 is what they call it… the plus sized micro, for the heftier marksman who feels left out
@@XrayMike17plus1 why release a 4.5 in barreled gun that’s marketed towards carry, any barrel longer than 4 in isn’t even a carry gun so why not just get a full size, who would want a tiny “duty” gun if it’s for duty just go big or go home guy. Then how would it even be a “tac ops legion” when it’s already got everything the tac ops has? This thing is already a smaller Glock 19 “I gotta idea how about just make it a lil bigger so it can be like a Glock 19” -this guy
It's not difficult to chamber a round fully loaded, nor is it difficult to load all 17 rounds unless the mags are brand new. Sig includes a mag loader in the box. If you have issues with brand new mags you should be able to get at least 15-16 in it with the loader, then leave it for several days or a week and finish topping it off. I was able to load 17 in all four of mine when brand new but they were stiff, use the mag loader.
26oz unloaded (almost an M18), comp which it doesn't need (give me barrel length instead), $1300 which is fine, but... Maybe just sell the grip module? Kind of the point of the FCG? Remember your marketing..."Buy 1 gun, make it many guns" is that not....not a thing anymore?
Y'all not gone like this one but how about we stop coming out with a million different variants of the same gun and figure out this p320 issue if there really is one cause I want to buy one but it's getting hard to believe all these discharges are user error
Believe it. The P320 has long been fixed but it is mass produced and rides in lots of cops holsters and a lot of them are not gun people or particularly safe around firearms. Cops ND all the time. I've not heard of this "issue" with the militaries M18, that version has a manual safety. I don't like manual safeties on handguns but they can be beneficial when you're equipping a vast number of people with differing levels of firearms proficiency and general good sense.
i remember when yall used to be a for the people company. Now your just another company letting a military contract get to your heads. 1200 dollars for this? your damn mad.
@@jamesgarrison5546 I wouldn't buy either, but that's not a logical train of thought 🤣 "it's ok this is way over priced because they have one that's less over priced"
Take my money Sig Sauer 😍I guess it's time to replace my regular Sig P365 XL 🙌
Check out the Tacops module & a couple updated mags first
Heck with the hype, save ya some cash
Man just wait for the grip module to come out and your golden 👍🏼
I put a xmacro grip module on mine and love it
I want just the frame !!! Pretty please.
Excited for when the frame is sold separately
The original point of the FCG...YES! Give us the GM Sig!
Just give us the axg grip module already!!
This is exactly what I’m saying!!!!
Yes.
Fantastic Pistol Sig Sauer ❤
Been waiting for an AXG grip for the 365, and i love my traditional sigs in legion guise, so this checks all the blocks
I just got the macro comp last week now they drop this 🥲
@@mjparker504go register for the free magazines from sig
I have the TacOps. I'm definitely going to do a comparison of the grips.
The really interesting thing about the 365 XL and now the 'Macro' variant is that it's only an inch wide on the frame end and 1.1" wide at the magazine end of the grip. I've got a couple of Wathers - P99 and PDP - as well as an FN 509T for reference. The Sigs feel like a full-size gun in the hand, but its widths allow Appendix and even OWB strong side cayy that almost disappears. Theres nothing wrong with full-size duty guns, and for open carry, they're great - I know. However, concealed carry is the default in my state, and itty-bitty concealed carry pistols in past have been an exercise in compromise.
Going to get this as my first firearm lol
get a 229
Dis you get it?
I was wonder when they would make a P365 Legion model. Now I get to join the club.
Word
Idk what I'm going to do with my P365XL Spectre Comp after this - but - I'm definitely purchasing this the day it hits the shelves.
Just ordered mine!
Honestly, I'd love a DA/SA micro-9mm that uses the same magazine family as the p365. I'm sick of buying a whole new universe of accessories for each gun I buy.
likewise
Well said.
no kidding.. seems the only one that comes close is the Beretta cheetah but that's in 380. there's also the cz Rami. but a p226 in micro 9 size that takes 365 mags.... perfect
Yes if they would update the SP2022 to be optics ready and take P365 mags that would be awesome
Sig, the iPhone of the gun industry !!!!!!
ok now make the legion grip module available for the other sizes please and thank you
I love it, but difficult to find a solid holster for it. All of the macro holsters are too thin. Red Hill Tactical and Black Scorpion Gear are the only ones I've seen verifiable purchases from that can actually fit it. The more well-known brands like T.REX ARMS, Alien Gear, and Tier 1 do not carry an IWB holster for it.
don't want an integrated comp, but a longer barrel would be nice.
Or just a grip module.
Yes! These are both dead on.
Remeber that was the point of the FCG?! Now they just make new guns instead of frames haha. Like they realized "selling less guns isn't the point bois"
Man, that's great, but I love my P365 X Macro TACOPS. In these crazy times, I'd rather purchase more ammo than have another gun.
Or just have them release the AXG grip module. Like they have with the 320 so I can slap that on my Macro Comp
Can y’all please make an updated SP2022! Would love to have a polymer hammer fired gun from y’all that comes optics ready! It would also be incredible if y’all could make it have a fcu
Now we need that X TEN to match that!
YES!!!! PLEASE MAKE A 365XL metal grip!!!!!!!!
I heard it through some channels Sig Sauer is working with Icarus Precision to mass produce the grip modules. Time will tell
@@0DSantiag0 I hope so! They are sold out constantly, and whenever they are in stock it’s just not a good time to spend $500 haha
@@0DSantiag0 I hope so because if it’s mass produced then hopefully the price will come down. I know they sell them on Sigs website but always out of stock
Thanks for the update video 👍🏻
Will Sig Sauer offer a non-compensated Legion version of the p365 X Macro?
Just saw Shaun RYAN give this to Nick IRVING on his podcast. Sweet... ❤
In my edc rotation and will be for years to come
Txg frame macro would be interesting
What holster would you recommend?
Already have an X-Macro and X-Macro TacOps. Just release the AXG X-Macro grip module.
I hope I get it by Christmas. Pre order said 8-10 weeks.
That’s what I’m hoping 🤞🏽
I would love to have one.
Good thing I already have a macro I'll just wait for the grip to go on sale.
Sweet.... I mean, $1300 is steep for the average Joe. I'm still trying to trick out my P229 Legion. For that price I can get a threaded barrel, modified slide, and romeo optic. So if I fall into some extra $$ I'd most definitely get one of these for my daily carry.
Needs a 5.7 caliber kit then it would be perfect
What about a p365 or p365XL legion version?
Great there goes 1200
Perfect
This is sweet.
Looks solid as all Legion's should. Offer this version with a manual safety and I'm in.
I second that
I've got 6 365's, all have the manual safety option.
🤮
take my money!!!!
Wish it was all Black Camo that would be super cool my opinion only !!!
I just bought 2 xmacros and now I see this days later 😢
I am not at all familiar with sig sauer so is it at all possible sig could say what caliber these ads are? This is the 3rd ad I’ve seen here for different guns, no mention of caliber, etc! How about a little more information?
Only problem I’ve had with this is gun is plastic piece that connects to mag button. It broke loading a mag so I had to get another
Finally
Damn time to spend more clams lol right my edc is the regular p365xl I was planning on just buying all these parts and just remodeling my pewpew on my own
Please accept my pre-order already, I need it 😭😂
Where do you pre order
Omg I want my 365 back!!!
Now that is what I call a spicy based ball
available in illinois?
Will there be a manual safety version?
🤣🤣
@@maximusjoseppi5904 Are you old enough to have a YT account?
@@TheDw07 would have never guessed someone asking about a manual safety would say something else like that
@@maximusjoseppi5904 I don’t know who hurt you, but I hope you recover brother. 🙏🏻
I have the 365X manual safety. I fully agree with having an option with a manual safety.
Bad ass
whens it release?
Sheksay!!
So an extra $500 for a different grip module? Do y'all at least do a QC process on these?
That's our job. Remeber? Haha
So an X Macro dolled up?
Is this xl or macro size?
I honestly love sig, but they did nothing to the trigger on this model. If they did some trigger work, I could see buying it.
That's the only thing that held me back from buying this. The AXG grip is cool, but otherwise, I basically have the same gun already. Except my slide is the spectre comp version.
@@MrAtr0309 it is the same trigger
Are there any extra bells and whistles? Besides being legion
For only 3 times the price of the base 365 You get a cool coin and a membership to the legion club we're you can have the privilege of buying SIG Sauer legion brand stuff YAAAAAAAAAAAY
The aluminum grip module is the main one
@doublepiedavid8908 Icarus, in my opinion, is better. Plus you could save some cash
With this gun...you are basically John Wick.
@joemo1033 how is that?
Now if this was a hammer fired da/sa id buy 2.. wish sig made a hammer fired in this size
Where is my no comp model?
Great. Now make an X-Macro TacOps Legion - preferably a long slide version.
I will hate SIG even more... and by hate I mean love and that I would most definitely purchase both.
Or just get a 320 axg at that point cuz how long do u even want your carry gun? 4.5 inch barrel, super-carry-duty, legion, tac ops, elite, nightmare 24/7 is what they call it… the plus sized micro, for the heftier marksman who feels left out
@@mjparker504 LOL, I'm guessing that made sense to you when you wrote it...
@@XrayMike17plus1 why release a 4.5 in barreled gun that’s marketed towards carry, any barrel longer than 4 in isn’t even a carry gun so why not just get a full size, who would want a tiny “duty” gun if it’s for duty just go big or go home guy. Then how would it even be a “tac ops legion” when it’s already got everything the tac ops has? This thing is already a smaller Glock 19 “I gotta idea how about just make it a lil bigger so it can be like a Glock 19” -this guy
When available
Just ordered an original Xmacro. Could I swap the grip module, or is the slide a different size?
Same size but I dunno if they’re gonna offer just the legion grip, might have to get a 3rd party one from Icarus precision or etc
My one question. Is the slide cut to take other optics than just Sig's line of optics?
You can. You might need an adapter plate depending on the optic you choose, though.
Excellent ?
should be shield rms-c footprint, which is pretty standard for microdot slides.
Shield RMSC
17 round magazine?
If you cram 17 rounds in the mag, you should train as you fight
It's a real b*stard to rack with that loadout
@@whiskeythree1622You would be reloading on an open slide most of the time, correct? Unless you are Paul Harrell...
It's not difficult to chamber a round fully loaded, nor is it difficult to load all 17 rounds unless the mags are brand new. Sig includes a mag loader in the box. If you have issues with brand new mags you should be able to get at least 15-16 in it with the loader, then leave it for several days or a week and finish topping it off. I was able to load 17 in all four of mine when brand new but they were stiff, use the mag loader.
ar 15 rifle is the one from cod. It got similar iron sights.
26oz unloaded (almost an M18), comp which it doesn't need (give me barrel length instead), $1300 which is fine, but...
Maybe just sell the grip module? Kind of the point of the FCG?
Remember your marketing..."Buy 1 gun, make it many guns" is that not....not a thing anymore?
How much???
Updated the XL with the Tacops module
Perfection
When i need anything additional ya self serving a-holes, I'll ring ya
Another great looking handgun but not at that price.
Give me an AXG grip module for my XL🙏
👏❤️👍
Is this the exact same size as the tacops?
At this point, the P365 renders the P320 redundant, if not obsolete.
What’s this chambered in ?
416 Rigby
454 casull
❤️✅
Price????
13ish
Will it go off if I drop it?
Not buying until you make a version without the slide ports.
Shut up and take my money!!!
Y'all not gone like this one but how about we stop coming out with a million different variants of the same gun and figure out this p320 issue if there really is one cause I want to buy one but it's getting hard to believe all these discharges are user error
Seems to be apecific holster /user related.
Tony is correct.
Believe it. The P320 has long been fixed but it is mass produced and rides in lots of cops holsters and a lot of them are not gun people or particularly safe around firearms. Cops ND all the time. I've not heard of this "issue" with the militaries M18, that version has a manual safety. I don't like manual safeties on handguns but they can be beneficial when you're equipping a vast number of people with differing levels of firearms proficiency and general good sense.
I’m waiting for sig to make a p365 in .40cal
Not possible, would have to bump up to p320 platform.
that's preposterous
40 is kind of dead for now brother.
In a few years there will be a .40 SEC (super extreme carry) or some shit.
Ppl will buy this and still modify everything on it
CALI LEGAL PLEASE!!!!!!! Take my money!!
Why you do dis to me SIG?
i remember when yall used to be a for the people company.
Now your just another company letting a military contract get to your heads. 1200 dollars for this? your damn mad.
Sounds like Gran Turismo or Forza background music
I'll wait for drop test first lol
Is it safe to carry?
365 or 1gen p320?
I carry the spectre comp as my edc. So yes.
@@en392 365 I love sig but, because all of the issues I just use mines for the range
Not for you
What issues? The only issues I’ve heard about the 365’s is some people reporting rusting. None of mine have rusted though.
Sell without mags please. So ban states can get them.
Fuc that it looks good, iam glad iam not a gun whore iam perfectly happy with my 365XL for all the extra $$$ my XL wins!
this is the answer
Pretty shitty though it don't fit regular macro hosters
Brown Donna Robinson Mark Thomas Melissa
Moore Eric Walker Linda Thompson Melissa
Can you guys stop playing games, and make a subcompact pistol chambered in 50 BMG with a 10 round mag?
Over $1000 for a carry? Nah. Hard pass
I live in California FML
Bah, too pretty for sure.
Shit😢
What an over priced hunk... We made it metal so it costs 2.5 times more....
Agreed
I replaced my grip module with 1 piece aluminum from icarus precision on my 365XL spectre comp. It was a little over $300
so buy the plastic one for 2.5x less and be happy?
@@jamesgarrison5546 I wouldn't buy either, but that's not a logical train of thought 🤣 "it's ok this is way over priced because they have one that's less over priced"
@@maximusjoseppi5904 so your opinion on pricing of this product is completely irrelevant?
anything legion is a waste of money!
But the color! And you get a COIN!
@@joemo1033 could you just imagine the beat down someone would get at a bar if they tried to pull out a legion challenge coin? lol
@@dwayneelizondomountaindewh6073 not as bad as the guy pulling out the Glock 48