P0299 Underboost - N75 Valve Diagnosis and Replacement - VW / Audi / Seat / Skoda
HTML-код
- Опубликовано: 23 ноя 2024
- Welcome back Bluudies to the channel. In this video I finally track down the fault putting my van into limp mode, bring up code P0299 Underboost. I look and test the vacuum side of things in this video, testing the engines vacuum operations, hoses and the N75 valve. The valve cost me £43 delivered for a pierburg OEM one, not the cheaper £20 Ebay ones. That is what ws fitted previously and caused the issues. The vacuum test cost me £11.50 off ebay.
Hope you enjoy the video.
--------------------------------------------------------------------------------------------------
Want to get your name in one of the videos? Become a Patreon of Bluudys Garage today, all Patreons get there names added in all new videos posted. All your support goes straight back into the channel.
Patreon - / bluudy
--------------------------------------------------------------------------------------------------
Support the Channel;
www.bluudysgara...
Bluudys Garage (Instagram/ Facebook)
Bluudy (Snapchat)
---------------------------------------------------------------------------------------------------
Please take a moment to check out our sponsors!
Sponsored by JDM Plates; specialists in supplying the smallest legal number plates for all UK vehicles - particularly Japanese imported cars.
For 15% off all number plate purchases at www.jdmplates.... please use discount code 'bluudy15' at the checkout!
Sponsored By Seicane - Car Media and Audio Equipment -
www.seicane.com
5% discount code - AFFSC-2305-KGKW0-ANSK
CreativeHill Logo Design Specialist - www.creativehil...
Sponsored By Car Guy Clothing - Use code Bluudy10 to get 10% off awesome clothing - www.carguyclot...
--------------------------------------------------------------------------------------------------
Music in this video by;
Intro Music Epic Hip Hop
• Video
Cartoon - On & On (feat. Daniel Levi) NCS Release
• Cartoon, Jéja - On & O...
--------------------------------------------------------------------------------------------------
Since owning a Volkswagen with a BLS engine I could practically become a VW tech
Same with a bhw
@@pgx452what about brr
Looks like I'm having a very similar issue with my 2010 Touran BLS...
The OEM N75 seems to have packed up...
Once I bypassed the N75 and put the vacuum pipe directly into the actuator, the car is back to being a re-mapped beast as it should...
With the normal setup, she's barely able to pull herself...
Good, and clearly shown content anyway, fair play
Thanks very much
Hi, how do you bypass the N75?
@@giftdube2346 Hi, Just ran the vacuum hose not to the N75, but directly to the actuator... Once you push it onto the actuator tiny pipe, you should see the bar move once the engine is running
@@The30Fazer thank you so much, let me give it a try.
@@The30Fazer thanks a lot, managed to do so and the turbo is kicking inn at revs, even tha actuator movement is visible, now just have to find a way of getting rid of the excess hanging pipes
Very, very useful and practical video. You are smart, man.
Great vid pal my van was doing followed your vid on off chance bought the n75 vacuum valve and solved my problem cheers 🥂
So to recap the troubleshooting process:
1.T test between check valve(black and white thing) and N75
-revving engine to 2000/3000
-if it doesnt hold vacuum the vacuum pump is the problem
-if the arrow goes to max vacuum everything is ok
2.T test between actuator and N75
-revving engine to 2000/3000
-if it doesnt hold vacuum the N75 is the problem
-if the arrow doesnt move and then jumps there is a problem
3.Test vacuum reservoir if it holds vacuum on turned off engine
4.Test actuator if it holds vacuum on turned off engine
Someone correct me if im wrong.
Also please comment if you have another test to add.
Nice! Well done fixing it!😎 I need to grab myself a vacuum tester, although my ECU throwing errors regarding MAF sensor and egr valve. So I think my under boost problems lies with the egr valve. But first I'll start cleaning the MAF, hopefully it's the MAF or else it's going to be a awful lot of work😅
Egr may need a clean too. Be a good fix if you can just fix it by cleaning. :) good luck
Hi mate, got the same van with 120k on it, noticed with way making a noise when changing gear, a quick google and the n75 valve came up, swapped for a pierburgh and the vans going great! Pulls like a train up to 90mph! Cleaned the egr tonight which was clogged up, I’d imagine yours will need doing at some point. Keep the vids coming!
Same haha, it starts making very wierd turbo like noise. my n75 was so rotten i tried changing the hose and the valve literally broke in 2 pieces. Changed it for a new one and issues are gone
Mine makes the Moo noise, when turned off, not really too noisey like some. But i have no boost issues it drives fine so been putting off fixing this.
Hi just watched your video on changing the n75 valve on your T5 finally someone who knows what the noise was after turning my T5 engine off . I've asked loads of people no one ever knew what the noise was mine is a 2010 and been doing it for seems yrs . Just wondering if I can get away with changing the valve and not after mess around with any ECU fault resets
good job where did you buy the pierburg valve one from please do you have a link
hi blundy just bought and fitted n75 valve thanks its working great now . come see me at tatton park vw show this weekend boo's future classics
Thats good. Glad it worked out for you.
Good job using the OEM parts, the copies always fail with these N75 valves.
Yeah. Its not like it was expensive really.
Hi, I came across your video, very informative and guidance is great. I have a VW T5 2007 (56 plate) 2.5 TDI LWB with this issue. Trying to find the N75 valve part is a nightmare. I got the vacuum kit and will be doing the testing this evening following your process. One main thing is I do get smoking, along with Limp mode, lag but only the P0299 code. Would you have any references for the N75 valve I could use? TIA
Nice good fix glad you got it sorted mate 👍
Thanks Mike. Im glad its finally sorted.
@@bluudysgarage your welcome mate yeah I bet your glad can drive you mad trying to find a fault son got a water leak coming in back some were
you "bluddy" love making these "bluddy" video`s dont ya 👌👌👌
Sure do :)
Will this cause my brake pedal to be stiff the next morning or after a few hours the car is off?
My crafter (Named Hitters Revenge) threw up the same codes and performed exactly how your did under load it just goes into limp mode. changed the N75 and no difference so the investigation continues
Well done mate fixing this fault . I loved watching this video it was interesting all the vacuum pipes etc 👍
Thanks dude. Glad you enjoyed it.
I’ve got the same vacuum tester. I’ve used it to change brake fluid 😆
Great idea if it works!
@@bluudysgarageThat’s what the pot is for in the kit. Suck the new stuff through, just keep an eye on the reservoir.
I've got one too. For the brakes. Wasn't impressed so got the reservoir pump.
Not a waste of money now I have been given a new use for it.
Hi, Ive recently brought a t5 2.5 and it has the over boost issue. I've cleaned turbo with oven cleaner and actuator lever moves freely with hand. Only happens when over 2000-2500rpm. Is this down to a faulty n75 valve?
Great videos by the way 🙌
Any joy? Mines same just bought an n75 valve mine goes into limp mode mainly in high gears on the motorway and glow plug light come on flashing
Just rewatched this as my cars throwing up this code now. But am I right to assume that this fix will only be good for vag group cars as mines a Ford Focus
Having inlet valve stuck and low boost error. I have a bitdi t6 so 3 are ordered piersburg
thank you, your video saved me a bundle!
Thats great!
Is overboost on a BKD engine always the turbo vanes sticking?
When you was testing with the pump, was you plugging it into the top part of the valve which goes down to the turbo?
I replaced n75 on passat.. After testing a lot it seems my valve is constant at full vacuum. All pipes good, everything clean, new valve. Any idea?
I got the same issue with my Passat 2.0 TDI and I’ve done exactly what you did changed the same part Peirburg but the issue still the limp mode goes on and still the same fault code P0299..any advice
I have a 2005 Volkswagen Passat TDI first start the car drive drives good take off is eh once the turbo kicks in it takes off sometimes 10 minutes sometimes 15 minutes sometimes five minutes turbo trans off causing the limp mode put the scanner on there was four codes One for the msf One for that n75 I don’t have a vacuum tester but when I shut the car off turn it on for just a second turbo kicks right back on and then after five 10 or 15 minutes goes back in the lint mode what do you suggest n75 Thank you
Hi there. I wonder if you can help. I have an overboost fault and issue that I can’t seem to solve. I’ve replaced the turbo, as the old one was seized, and boost pressure sensor had been changed. But the van continues to flip into limp mode when driving it (up hill or under load mainly). I don’t know what else to try or do. Any help greatly appreciated.
But or I think the n 75 valve cannot move the A turbo actuator enough
just 1 centimeter. .
Do you think if i change n75 would be ok?
do you think the turbo actuator should all the way up?
when the car start
also i didn't find any holes in vacuum pipes
any idea what should I or could do
thanks
and also this came up from computer 19586 - EGR System
P3130 -35-10- Regulation Range Exceeded-Intermittent
17964- Charge Pressure Control
P1556 -35-10- Negative Deviation-Intermittent
Your videos are sooooo much better to watch when you don't keep doing them silly voices you do 👍👍
Not sure which voices you mean... but I am who I am.
👍👍👍
@@bluudysgarage the silly voices rock dude !!! great content
Greetings from Denmark. Nice structured style video fixing the underboost. BTW The N75 looks for me like a chinese knockoff with a nice label on it. Real N75 Pierburg valves have some numbers, the Pierburg text and the logo moulded in the housing. But its nice that it works.....
The one I removed was a cheap ebay one. I replaced it with a genuine pierburg one.
@@bluudysgarage I will repeat myself. The one you installed looked fake to me....but as long its works, everything is ok.....
Like I said it was genuine part with paperwork to match.
Thanks you. You saved my head from much headache I replaced mine problem solved
Hi, thanks for the video. Is it possible to diagnose the N75 valve fault by disconnecting the air-mass sensor plug?
@AbsoluteModictsSport
Well ive a skoda 2016 ive got the same code there for underboost bug i all so have P13D600 Thats a glow plug with pressure sensor would that cause inder boost
I got the same problem on my t5 bi turbo all was fine then it dropped a vave put a recon engine and new turbo in and now got that same code and problem not even vw no wots up with it
Did u fix it I am a vw specialist but I’m south Scotland
Same story, recon engine new turbo, and same issue :(
Did you figure out what it was? I have a t5 bitdi with the same limp mode crap going on
Congrats on fixing Alan. It does pay to use OEM parts.
Thanks man. Sure does.
Thanks for this video man! A week after I ordered a new van for work, my trouble free 2013 T5.1 decided to shit its pants, (I swear they know!) This video has been of great help. 👌🏻🍺
I'm glad :)
How long has it took you to get a new N75 valve from buying the van. Surly it don’t take weeks n weeks to find that out ??
Videos are staggered out. So not as long as the timeliness on youtube. But I bought the van as a camper project not as a daily driver. So most of the time is spent just sitting on the drive.
Have you got a link for that creative code reader please 😇
So I’m confused cause shouldn’t you have less vacuum going to the turbo from the n75 on idle and more as your rpms go up to open the vanes. I have a 2006 1.9bew and I have p0299 code smoke like crazy till I go over 50 then goes into a limp mood kinda. I have 20bars of vacuum on idle and then goes down to about 10 when up to 3k rpm
Not it shouldn't. Your losing vaccum. You have a leak or a faulty sensor
Hi i need help i change n75 and test and it good but still not open?
Would it be possible n75 could be faulty without a code
You telling us what issue it had is like you was describing my van lol. Did the coil light flash by any chance?
No afraid not.
@@bluudysgarage I changed my abs sensors as 2 of them wasn’t working and it doesn’t go into limp mode as often now. I have just ordered the solenoid though hoping it’ll help my turbo lag
Hi mate similar issues with my 08 caddy, 1.9tdi pd105 BLS code. Mines intermittent, fine for miles in 5th on the motorway then all of s sudden stops boosting, if I floor it all the time it doesn't do it. It's only low rpm when engine is probably under load. Turn the engine off and on again and it's fine. Would you suggest a new n75 valve or try the Mr muscle job? I've been using loads of fuel additive s and one where you spray it into the induction hose after the maf but still no joy. The vans booked in for a pd130 swap with hybrid turbo but I need s cheap and easy fix until my engine swap has been done. Thanks!
Did you ever get to the bottom of your issue? Sounds a lot like the issue I’m having on my BLS Caddy. I get no fault codes even when it’s in limp mode.
@@Mac_F87 yes mate the n75 valve was blocked/had no pressure. The engine threw a rod in the end but when I was changing it for a bkd 2.0 and the turbo and n75 could've done with being changed
@@jamestyrrell2225 ah right I'll buy a new N75 then. I'll try that before going to the trouble of taking the turbo off and cleaning the VNT etc. I'm concidering doing the con rod bearings and bolts on mine to stop it throwing a rod in the future.
@@jamestyrrell2225 after checking vacuum from the tandem pump, doing and output test on the N75 while connected to my vacuum gauge and doing and output test while everything was connected as normal it turns out it was my VNT actuator that’s faulty. The rod was only moving 5mm or so while doing the output test.
Is this whats referred to as the ‘moo’ valve due to the noise they can make when turning off engine?
It sure is.
It's also called the boost control solenoid.
Its a N75 valve in the vag community also known as a moo valve.
German efficiency for you, using numbers instead of names. Lol.
Yeah sounds about right.
Can N75 fail without any error codes?
I have a 1.6 tdi Skoda and I have the exact same code exact same problems (when limp mode occurs etc) I changed this part and limp mode still happens in 5th gear where should I look now ? I took to a garage and they tried telling me my turbo has gone but I know it hasn’t
If your turbo is working in the other gears then its most likely not that. If its happening when in your higher gears then its when your engines creating maximum boost pressure for a longer period of time. Id be checking for vaccum leaks on the accurate pipe work or splits in the intercooler or pipework.
@@bluudysgarage great thank you for your help 👍🏾
they will always say turbo everytime because they cba just look into the problem because its not an expensive fix an a new turbo they fitted will rack up a bigger bill for them
Do u know if audi a6 c7 has this part?
Thank you !
It’s this the same for overboost?
Do u know if audi a6 c7 has this?
Is the camera recording 60hz? Our electric is 50hz so maybe that
It sure was and we are. This has been sorted and any new videos I've filmed since dont flicker :)
Did this completely get rid of the P0299 fault?
Yes as this was the fault on the van.
Thanks changed mine done all sorts just won’t stop throwing the underboost code up😢
I got The same p0299 but i hear noise grom The smak.turbo
Top name for the van lol
Lol
Hi where can I get a OEM n75 valve please apart from VW dealer
It is possible to get them online just make sure pierburg valve.
@@bluudysgarage thanks for your reply 👍
Anybody knows how to disassembly this kind of n75 ?
Haha i knew it 😀
You damaged it with mr cleaner right? Lame problems from corrosive products inside vacuum circuits
Not at all. Fault was there before and after. Not sure how you think the cleaner can get inside the vaccum system.. hahaha
@@bluudysgarage just asking if there is any relation. Thank you
Yeah no problem. No it can't get into the other system from the exhaust.
Bellend
4.4 benzin
These things are absolutely terrible vehicles, mine costs £4k+ per year in maintenance and can't get 4 months before it lets me down monumentally so bad I have to have a spare vehicle for when I fails. I've wanted to sell it for years but everytime I fix it something else fails. VW are a joke. Do not buy one, actually buy mine its a 2011 it's had almost every single mechanical part replaced Including: engine, gearbox, turbo, intercooler, clutch, clutch bearings X2, all suspension, Egr, dpf, power steering pump, clutch, flywheel, brake calipers, top mounts, drop links, alternator, all wheel bearing hubs twice, discs pads, tons of tyres, water pumps, cambelt, window switches, fan blower resistor, it's non stop I've had 8 drop links in 4.5 years. £12k if anyone wants it, I only do 6-8k per year too!!!!! Always used with shell vmax diesel.