I didn't know Eastwood made these. I have a different brand but if I go for a bigger one I'll see what you guys have. I love love love mine! I only wish it was big enough to put a whole car in. The best use I've gotten out of it is washing stripped down valve body casings and if you do it that way once you will never go back. You could sell these things as brand new if you weren't honest about it. I couldn't believe how clean they get. I mean they look like you just grabbed it out of the mold.
4:36 the carb comes out black, then at 4:42 the next time we see the carb and it's resting in the basket on the towel. But it's cleaner then when it came out. Hmmmmmmmmmmm amazing how stuff like that happens. I'll pass
That's going to depend on your application. But you can find pricing info and more here: www.eastwood.com/eastwood-9l-heated-ultrasonic-cleaner-with-degas.html
For small parts, hard to reach areas, and bolt carriers, ultrasonic cleaners are great. If you clean your arsenal often, these can save you a lot of time. -JD
to be honest the presentation SUCKS, people are using this machines the wrong way, you MUST do some cleaning to the item(s) before put them into the ultrasonic cleaner, if you want real results, this ultrasonic machine are not for removing excessive old grease from parts, but to remove the first layer attached to the part to get real results, stop been lazy clean the part with excessive amount of dirty and grease and then into the ultrasonic machine. YOU MUST DO SOME CLEANING BEFORE FOR BETTER RESULTS
@@SandeepMohammedAliI mean, it's pretty obvious you should clean things first before using the ultrasonic cleaner. I bet you just put your filthy dishes in the dishwasher and wonder why they don't come out clean.
I've never heard of someone using an ultrasonic cleaner to clean carpet. Maybe an industrial-sized cleaner could do it, but you're talking lots of money. Look into the Bissell SpotClean Pro. I highly recommend this for automotive carpets. 10/10. -JD
I'm a student at Bahir Dar university, Ethiopia doing a research. Could anyone help me get an ultrasonic transducer and horn (vibrator) with a variable frequency. The item shall have control and display units.
It’s so annoying to watch videos where the person attempts to point to a link on the screen for a different video but then no one adds the link. Or else the person points to somewhere other than where the link actually is. This video is the former and is the more annoying of the two. Feels like we’re being lied to, doesn’t it? “You can click here to see that!” Ummmmmm, no we can’t. Get it together.
Often times RUclips updates the back end and our links get killed but the video stays active. We have a lot of videos to try and stay on top of. Sorry about the experience though.
These parts were pretty bad to start with. When it comes to cleaning all the little tiny passages in carburetors, you can't get to those with a brush. But an ultrasonic cleaner can. Also, these aren't involved. Fill the tank with water, cleaner, and a part. Set it and forget it. Go do something else. Drain when finished. -JD
I didn't know Eastwood made these. I have a different brand but if I go for a bigger one I'll see what you guys have. I love love love mine! I only wish it was big enough to put a whole car in. The best use I've gotten out of it is washing stripped down valve body casings and if you do it that way once you will never go back. You could sell these things as brand new if you weren't honest about it. I couldn't believe how clean they get. I mean they look like you just grabbed it out of the mold.
They're pretty neat products. They work fantastically well.
-JD
😂😂😂😂
4:36 the carb comes out black, then at 4:42 the next time we see the carb and it's resting in the basket on the towel. But it's cleaner then when it came out. Hmmmmmmmmmmm amazing how stuff like that happens. I'll pass
its wet bro. he probably dried it while waiting for the 2nd machine
Selling them and asking will they work? Would you expect any answer other than yes?
Aren't the cavitation bubbles damaging the components a concern?
Love that cleaner!
So if you could get one which would you get. The is price on them ? Thanks Mike C
That's going to depend on your application. But you can find pricing info and more here:
www.eastwood.com/eastwood-9l-heated-ultrasonic-cleaner-with-degas.html
Don’t u gotta take the carb apart?
Pretty proud of that chinesium
Everything you used to post this dumb comment was made in China.
Do these work well for carbon removal on firearms too?
For small parts, hard to reach areas, and bolt carriers, ultrasonic cleaners are great. If you clean your arsenal often, these can save you a lot of time.
-JD
Best channel
Thank you!
-JD
Use a trash bag for a liner easy cleaning of unit
Nice tip!
@@eastwoodco be careful not to over heat the bag or clean it when hot bag will be soft
@@newsomsr2000 - Use crock pot bags from walmart 😎😎👍👍
@@KlodFather good one 👍 as long as it can hold 7qts it will work
@@newsomsr2000 - Well even a broken clock is right twice a day. That must be the bong I hear in my head about once and hour or so LOL
did not do much more than me soaking stuff in a tub of degreaser, much cheaper.
Don’t ever bother asking eastwood questions, they won’t answer, they just like the comment
We try and answer everything we can but no doubt we miss some questions. You can always reach out to our customer service directly at 800-343-9353.
to be honest the presentation SUCKS, people are using this machines the wrong way, you MUST do some cleaning to the item(s) before put them into the ultrasonic cleaner, if you want real results, this ultrasonic machine are not for removing excessive old grease from parts, but to remove the first layer attached to the part to get real results, stop been lazy clean the part with excessive amount of dirty and grease and then into the ultrasonic machine. YOU MUST DO SOME CLEANING BEFORE FOR BETTER RESULTS
LOL, ok "expert"
@@SandeepMohammedAliI mean, it's pretty obvious you should clean things first before using the ultrasonic cleaner. I bet you just put your filthy dishes in the dishwasher and wonder why they don't come out clean.
@@intensecutn i bet you just let your uncle pummel your behind without washing it first and wonder why his sausage tastes like crap
@@intensecutn mong
@@intensecutn dumb mutt where are you fkhead
Not sure!
How about a list of the liquid you put in the machines??
@1:20.
That’s Fancy
Can ultrasonic cleaner clean a carpet? Or is there an ultrasonic cleaner big enough to fit a carpet?
I've never heard of someone using an ultrasonic cleaner to clean carpet. Maybe an industrial-sized cleaner could do it, but you're talking lots of money.
Look into the Bissell SpotClean Pro. I highly recommend this for automotive carpets. 10/10.
-JD
Carpet may not be the ideal thing to clean using ultrasonic. Carpet being made of soft fibers will absorb a lot of the vibration
1:50 Frankenheit lol
I'm a student at Bahir Dar university, Ethiopia doing a research. Could anyone help me get an ultrasonic transducer and horn (vibrator) with a variable frequency. The item shall have control and display units.
to bad no one makes any that fit whole engine heads that aren't $4k.
what do you expect... $25.00?
That’s a Willy’s Jeep carburetor lol
“It was painted black underneath the rust” 🤨
Eastwood, Nottingham? 🤣
Lol. Paint under rust 😂
😂😂😂I thought the same mate. Rust forms on bare metal not painted hahaha
$400.00? Seriously?
Same Chinese units are $150 on Amazon. Relabel scam.
Dang that much. Yikes. Was thinking 200$ for 9qt
@@advilshenk - Yep if you get it on ebay or amazon. Bezos is rich enough. I buy my shit on ebay mostly.
Pass
Looks same...
It’s so annoying to watch videos where the person attempts to point to a link on the screen for a different video but then no one adds the link. Or else the person points to somewhere other than where the link actually is. This video is the former and is the more annoying of the two.
Feels like we’re being lied to, doesn’t it? “You can click here to see that!” Ummmmmm, no we can’t.
Get it together.
Often times RUclips updates the back end and our links get killed but the video stays active. We have a lot of videos to try and stay on top of. Sorry about the experience though.
@@eastwoodco then just put the link in the description and stop trying to be cute in the video by pointing to it.
Are you demonstrating You or the machine, because we sure saw more of You than the machine. We also saw more of the entire shop. Learned nothing here.
Okay it was an 8 minute free video. Jesus christ you boomers are so insufferable
Mate, either speak in litres or quarts (whatever that is!), it’s confusing when you change metrics!
Unimpressed
because you're clueless and ignorant.
They dont look any different what a lot of involvement for little benefit?
These parts were pretty bad to start with. When it comes to cleaning all the little tiny passages in carburetors, you can't get to those with a brush. But an ultrasonic cleaner can.
Also, these aren't involved. Fill the tank with water, cleaner, and a part. Set it and forget it. Go do something else. Drain when finished.
-JD
88127 Franecki Passage