unlock DCM7.1A. via OBD with Flex programmer. Peugeot/Citroen read/write Delphi ECU thru OBD. AdBlue
HTML-код
- Опубликовано: 25 май 2024
- This is the method I use to unlock this Delphi ECU. You must know that the responsibility belongs to you, I only bring you information, I do not assume responsibility in case you encounter problems.
Video made for informational purposes !!!
As you know, the programmer used is one of the best used in this activity.
Here is the link for those interested in purchasing it:
bit.ly/FlexYOYODiag
at this email address you can ask about and send files for modification EGR,AdBue, DPF etc.:
yoyotuningfiles@gmail.com
thank you for your time and for the details and tips
I wish you success
Thank you 👍
You're really good with explaining! Thanks for the good work.
Thank you 👍
I love you soo much, thank you for everything my man, you are amazing. Real talk and educative. Thank you
👍
One of your best videos so far.
Thank you 👍
Very good information!
👍
You are the best, men!
👍
Super wooow
I have learned how to maintain the ecu not to go sleeping because on renault a had problems în the past ween reading the ecu went off 😄
The 2 section write i had experienced on edc16cp34 on vw touareg.
For now I don't have the hardware to read this ecu hope to upgrade în the future.
All the best
And thank you for sharing.
I'm glad to hear that the information is useful and you learn something new. 👍
You dont need to find the exactly same car/hp/model all that in tuningsoftware, the tuningsoftware is set up to make it easy to find right protocols, if you have problems and you know right protocol the car have ( search HW/SW often helps ), So if you find a peugeot that have same ecutype, you can use it, often as here the same ecu is in other cars with same protocol.
I have done this alot, most often on VAG cars, but also reanult/opel, so if you know its wrong ecu just use same protocol on other cars that share same ecu/protocol.
your theory is okay but my question is how many Peugeot ECUs have you experienced? He knows how to communicate these ECU's from Peugeot and Citroen. I think you know the risk when writing by obd on these brands of cars (Peugeot/Citroen)
Hi again, thank you for another great video. Where do you get the moded ECU file for Adblue off? Does Flex have some sort of data base for files like that? Also as for the scanners I asked you the other time on a comment on your video, thanks a lot for all the info you gave me. I’m going for the Texa because it is much cheaper than Bosch and it has much support in my country. The dealer of Texa says it has all the same functions, activations for solenoids, sensors and everything and in some cases it’s even better than the Bosch one, he said in some vehicles you have more options than the the Bosch. Again thank you for taking the time to advise me!!
All the files I make myself.
Don't believe everything that you heard from the seller's .
@@YOYODiagnostic i would be interested to see how that work, how about if you have time to upload sometime a video of how you make the files, that would be interesting.
You are right 👍
👍
greetings from EGYPT
👍
love your comparisons bro.... thanks... can you make one comparison on ..Formula-Flash ..Vs.. Flex .... please
👍
More one good work
👍
👍
Thanks bro brilliant video. Perfect time i got one to do soon...
Do you have to unplug adblue module or is ok?
The Citroen Ds7 virtual read will it be same for Peugeot expert? So if i send to my master he can adjust ok
You are welcome.
As you saw and I wrote, I have the same engine code and the same HP. It is identical, but I said you take risks when you do it via OBD because the communication with the ECU is not direct. When you connect the programmer in Bench, you are connected directly to the ECU, but through OBD communication is done through the ECU gateway. I have not disconnected anything and everything is OK.
Thank you for the valuable information. But have you tried the Autohex device? multiprog
Hi
No this is one of the few products that I don't try 😕.
can you recomend scaner for dodge 2018-2024 ? to make full diag , read and clear codes
Launch or Autel
Hi, Good Job. Do you use desktop mode or web browser mode with flex software ?
The new software version is on the desktop 👍.
Where can i learn how to do programming
Did u ever use the kess 3 ?
In search on kess3 there are 32 results for DCM7.1a 11 are boot only rest are obd and boot peugeot 308 t9 5008 508 508sw and traveller are peugeot options
2.0 blueHDI Engine model DW10 DIFFERENT BHP
Tor this car if you ask me.
But what do you think, I was curious to try it or not :)) .
Thank you for the info 👍
i meant 11 are boot and rest are obd and bench
@@YOYODiagnostic kess3 is ok i got call yesterday to do adblue delete on 2021 nissan nv400 but its sid321 and its not available yet they said engineers are working on it past month so hopefully soon auto tuner can do sid 321
I love this man so much
👍
I want do a donation on your channel i try do last year but you do not accept you do great work so i want help because i now this tools is extremely expensive. What's best way to do donations
Thank you for your support 👍
FLEX OR KESS 3? which is best?
I'm going for Flex. It's cheaper and does the same job sometimes even better. this is a comment based on my experience with programmers. Everyone buys what they want, but I recommend what I use.
ok thanks for the info king, I have kess 2 o ktag myself, now I'm reading and looking around for a good key programmer and affordable. btw your videos are nice👍
@@jojo3114 thanks 👍.
Hello. I would like to buy flex. Are hardware and software sold separately? What software do you use? Flex reads full flash or only partial? Thanks for the response and the videos.
@@felixrs4939
You have a link on the description when I use Flex.
Better is to ask the company Flex for selling details, I'm not a seller.
With flex was no succes with peugeot 7.1a get message no virtual read for this software
Now you have seen that it is possible. 👍
Great programmer, but so expencive.
👍