Thank you for visiting my channel! If you want to update the latest videos, click the subscribe button and turn on the notification bell. We will meet again in the next video. Thank you very much 🫡🫡
Great job !! The files you are using cut in one direction so when you apply pressure in both directions your flitting the cutting teeth on the file,also run a bead of weld on the flattened surface to build up the missing metal you filed off then sharpen them,
Super jest to odrestaurowane te szczypce stara zabytkowe ale najlepiej to jest z początku piaskować piaskować cały metal a później go podkładem i malować go później tak jak jest najlepiej Pozdrawiam serdecznie. 👍👍👍👍👍
0:37 Cutting that wire was unnecessary. You could have easily just unwrapped the wire, and saved wear on the wire cutters. The cutting was done simply to make it a little more dramatic.
Thank you . very good question. There is no chicken farm next to my house. Those are the chickens I raise. I feed them every day and watch them in my free time 🍻🍻
Just as I liked the video about 3 seconds later 0:12 a notification can be heard in the back round and I swear I was so confused as to what happened! Haha
Thank you for visiting my channel! If you want to update the latest videos, click the subscribe button and turn on the notification bell. We will meet again in the next video. Thank you very much 🫡🫡
Nice workmanship on the cutters, sure hope you put some rubber handle covers on the ends before they are actually used.😊
Splendid restoration job. That cable cutter looks much better and it works like a charm too. Excellent work.
Thank you very much . Have a good day !!
very good video
Thank you 🍻🍻🍻
Such great restoration 😊😊
Thank you very much 🥰🥰
Helo! I Also Do Restoration Of Old Rusty Machinery. I See You Do Very Well
Great job !! The files you are using cut in one direction so when you apply pressure in both directions your flitting the cutting teeth on the file,also run a bead of weld on the flattened surface to build up the missing metal you filed off then sharpen them,
Thank you brother for sharing.🍻🍻
You made more effort than it needed but it turned out ok.
Thank you 🥰
nice resto, a split pin through the castle nut will stop it from unwinding though, nice job.
thanks you .
Good job, congratulations friend 😊
Thank you very much 🥰🥰
What!?!! No sandblasting? I feel robbed 😪
Very nice job. Though get a paint pen for lettering.
Thanks you 😊
👍👍👍
Nice 👍👍👍
Dear your channel is monitize...?????
thank you
👌👍💯
Thank you 🥰
Super jest to odrestaurowane te szczypce stara zabytkowe ale najlepiej to jest z początku piaskować piaskować cały metal a później go podkładem i malować go później tak jak jest najlepiej Pozdrawiam serdecznie. 👍👍👍👍👍
Thank you 🍻
That cutter was probably lying in a toolbox like mine. The bolts and nuts are hardened blue steel
thank you...
Nice but long video
What is the white powder do you add to water to clean the tool ?
Very nice video thank you
It is sea salt after water has evaporated. Thank you very much
0:37 Cutting that wire was unnecessary. You could have easily just unwrapped the wire, and saved wear on the wire cutters. The cutting was done simply to make it a little more dramatic.
thank you 😇
Do you have a chicken farm next to your workshop?
Thank you . very good question. There is no chicken farm next to my house. Those are the chickens I raise. I feed them every day and watch them in my free time 🍻🍻
Just as I liked the video about 3 seconds later 0:12 a notification can be heard in the back round and I swear I was so confused as to what happened! Haha
😆😆😆. thank you 🍻🍻
make the same FASTER . pls.
Разве у таких кусачек, не должны быть калёные ножи ?. А если ножи калёные , то почему так легко, обрабатывались напильником ?
At least he is not committing fraud with it and is genuine ~ unlike the other “financially poor orientals” in Vietnam
Thank you. Wish you a good day
7:55 good soup 🌟
🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍
🫡🫡🫡🍻🍻🍻🍻
Почему то все очень легко откручивается😂😂😂
Доктора Дьюсрочно
Колхоз
Lost me at 0:48 buddy
Audios
Muito lerdo
что ж ты геометрию режущих поверхностей не восстановил, да ещё и хуже сделал? херня , а не реставрация!
Boring....
No sandblusting, dislike, unsubscribe.
😁
no really old the top of threads are too clean with no pot marks. stop lying to people
thanks you .