The Best Toilet/Shower Setup For Vanlife? How to Make Your Own
HTML-код
- Опубликовано: 25 авг 2024
- We designed a sealed retractable toilet design in our most recent van builds! Toilet, hot shower, niche, toilet paper holder, and clothes line all contained in a small footprint. Where space is limited, we think this is the best use of it!
The slide out Cuddy composting toilet is easily stowed behind a stainless steel, gasketed hatch conveniently when not in use. In this video we share the process of how we built it.
Products Mentioned:
Cuddy composting toilet: compocloset.co...
Acudor 18” gasketed hatch
Mapei Ultrabond Eco 350 sheet vinyl glue
Nautilus retractable shower door
MaxxAir Deluxe fan: amzn.to/38brXSE
For business inquiries please contact us via email: triovanconversions@gmail.com
As always, please LIKE 👍🏻 this video, SUBSCRIBE to our channel, and COMMENT if you have any questions or feedback!
Follow us on Instagram for behind
the scenes content: @thetriointransit
Thank you for your support
Much respect to you guys for the great design and workmanship. Your shower is really top notch and better than most RV/travel trailers. It does, though, seem like a royal pain in the butt to go through all the steps just to use the toilet. I guess I'm not cut out for van life, but I admire your grit.
You all kicked ass . Keep these videos coming
I have the same toilet. It's an unfinished prototype at best. Flimsy plastic, they weren't using stainless steel until recently so all of the metal parts are corroded, and it is not "ventless" as they claim. It collects a ton of moisture (inches) if you don't vent it. And to vent it, they don't even make a proper kit. I had to get a kit from a competitor and cut new holes. The price is nice, but can't recommend it.
So great you proved that my idea is right ! I'm planning a van conversion and was toying with this idea. I'm glad someone already tried it 😇.
That’s the best set up I’ve seen
Great work!
Thanks guys! I built mine after seeing one of your earlier videos and really appreciate you sharing this idea. My slides are mounted on an 8020 frame which I secured with bolts through the floor. (didn't want it popping in the back while sitting on it). Two things I learned along the way: the gasket reduces the 18" door opening to only 17" so keep that in mind when choosing a toilet. And, the bench height will need to be about 6" higher than the door height since the slides are above the shower pan. I ended up getting a custom made 18" wide x 16" high door so the bench could be a little lower. This does further limit the toilet selection but it can fit the Trelino Evo M.
Outstanding. I bought Cuddy after your recommendation a while ago and with the concern of what waterproof door to use being answered I can order it and keep moving forward with the build, as soon as my fingers thaw out. Thanks guys!!!
Great video! Watching it again and love it. Note: the hinges are stainless steel. We upgraded the Cuddy in August 2023. The stainless is not marine grade so it is still a good idea to use WD40 just in case.
Excellent Presentation of the Built👏👏👏👏👍🏽👍🏽👍🏽👍🏽💯
Really clever design! Thanks for sharing.
Thank you!
This was a great video. That is exactly the set up I want to go with on my 2019 Sprinter build. Thank you.
It's a nice design, but the door should really be on the right side of the opening so it will allow people to get in and out without having to stow the toilet every time to walk by it out the door. That way it can be converted only to a shower when needed and be a toilet the rest of the time
Wouldn't that interfere with the venting while under the bench and cause odors though?
Nothing wrong with it.
I was looking for shower ideas and you added another dimension 😮.. 💩
Would you mind sharing which brand/type the toiletpaper holder is?
Great design.
Beyond clever 👏🏻👏🏻👏🏻
Are you using the Acudor AS-9000 gasketed 18x18 access door? How large is the gasketed frame inside the access space?
Thank you for the follow up and the informative video. Well done!
Thank you 😊
Looks good but shouldn’t the door opening be reversed? That way you would enter the shower and be in front of the toilet opening, not on top of it and then , when sitting one the toilet , one would have some privacy even with the door open . And you can go in and out even when the toilet is “deployed” :)
1:36 nice idea 4:55
Yes I love 🎉
This is brilliant!!! I’m so impressed. How well does the vinyl shower walls resist water leakage? Thanks so much.
Which shower pan did you use? And where did the plumbing end up for the recirculating shower? Outside/underneath?
Awesome work! I would REALLY love to know the model number for the hatch (or the exact name). Having a hard time finding it. Thanks for the help guys!
I just love it.
I'd like to know the floor size of the van toilet
I’m so glad you posted this video! I’ll try to do this in my van and will add a link to your video 😊
Thank you! We look forward to seeing it 😊
Do you happen to have links to the specific gasketed hatch and rails you used? @@TimKatie
Do you have a video of the recirculating shower design?
I'm planning to convert an eSprinter (electric) and want to save weight as much as possible to minimize the impact on range. Your shower/toilet build looks great but I'd like to reduce the weight further. I'm considering using aluminum angle inside of wood. It weighs about 1/2 what kiln-dried 2x3 weighs. It's also lighter than 8020 and cheaper. I would rivet the aluminum angle to fasten. Do you have any thought about this approach? Gracias.
Brasil 🇧🇷
Can we get a full tour inside and out and all the tech talk and the whole shabang on the design of the sprinter van
Wait nvm I found the video ❤
great video, very helpful! What size is the shower pan?
Thank you! The shower pan is 24”x32”
Curious if you’ve ever thought of using aluminum studs for framing instead of wood? Would that work in a van? Seems like it would be lighter.
Nice job guys. I think I'll use this same design for my bathroom. Did you buy a black Acudor or did you paint it. I can only find them in Stainless steel color. Thank you.
Nice ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Did you have to paint the Acudor panel yourself? If so, did you use spray paint or have it powder coated?
Interesting but even though I am skinny enough to fit there it still looks tight. I wouldn’t mind trying it to see how it would work for me.
1 day I got To see @@@@🎉
Love it, where did you buy or design your Gasketed hatch? can you buy this online?
Thanks. We ordered it from acudor
Seat back end to backend, what is the length of your dinette?
And approximately what is the seat depth?
This is what you have been doing? Hope you took at least a day or two completely off… Quality craftsmanship for sure!