R u able to tie seat belts around the bottom portion of the spindle to the upper control arm to keep everything together if it breaks. I’m running a 1996 dodge stratus and the front suspension looks very similar
Connor Mullaney even though you were drawn second I am going to mail you some stickers please email me your address Zack.mccormack@hotmail.com is my email send it there please
yes thats true 99-98 is when the body style changed. the older ones you can easily remove the take little tip keep your front spindles when the car is dead they can swap inot the new style and are much stronger
got a question on a 01 Pontiac Sunfire. how do u move the brainbox from its Factory location to the safe location? mine Is right in front of the passenger tire.i thought about putting spray fmove around it .
inkZz Clan yes but if you have to know how you want the car to bend because if crease it to bend the same way you want it to bend ( in the back ) Doors and fenders yes 100% it helps To prove the point crease one side and then kick it then kick the other side that is not creased and see the different Even folding the doors helps a lot
I think civics are defferent because I helped make one and after the derby the engine was basically a bumper by the end and that car was stock as stock can be
Derby4life80z Civics are the same 88-2005 ish only difference is that there sub frame does not go to the front of the frame like the accords it's only a k frame not a complete subframe
I'm new to your channel what's your favorite car to run
I have a few favorites but you will have to watch all the videos to see which one i prefer.
I have 93 honda accord
nice good luck
Can i unhook the battery when i do my fuses and bypass the fuses like u did
yes u can just put them back when ur done
Have u ever run a 80s accord bud
No sorry I live in Canada so they are all rusted out
Are they good cars
Or can i leave it hook up
up to you
Can you do a video on how you do the msd coil set up
i do not sorry
How do u by pass the sercurty system
not sure i not a honda guy
Do you now how to get a 2001 Honda Accord with the 3.0 l running my friend lost his key we are trying to bypass it but can't figure it out
i am not a honda guy i am sorry i dont know much
Hey late to the party just crashed my 92 accord and now fuel pump lost power is there a inertia switch on these?
There is not check crank fuse under hood
no there is not
We move the fuse block inside the car because the strut towers bend back and crush them
that did not happen to be a issue it just kept turning off right after it would start in the end
I don't understand the reason for taking out fuses can you explain
less things to go wrong they could arck out and kill battery
So what do you do for the spindel
dont get hit lol
R u able to tie seat belts around the bottom portion of the spindle to the upper control arm to keep everything together if it breaks. I’m running a 1996 dodge stratus and the front suspension looks very similar
Yes you can!
Do you know how to bypass the chip key in a 2001 accord don't have the key and it's in security right now
no sorry i dont know how
Yes
Connor Mullaney even though you were drawn second I am going to mail you some stickers please email me your address Zack.mccormack@hotmail.com is my email send it there please
my 96 accord didnt need the sub frm out inoder to take the tank down
yes thats true 99-98 is when the body style changed. the older ones you can easily remove the take little tip keep your front spindles when the car is dead they can swap inot the new style and are much stronger
looking for bumper coverd for it to keep stuff from track gojng under
an your rite with not many fuses need to be run with um
Do you leave all the factory wiring in or do you cut everything and run you’re own wires
i leave every thing in the accord it was fine
How hard are them ignition coils to wire up? Think I’m gonna grab one for my 95 according. Running it this Saturday.
its super easy to change the fcatroy one or put a aftermarket
zacks workshop ok I’m picking up a MSD one now. I tried seeing how you did it on the 94 accord wagon but couldn’t see it too good.
do you know exactly which fuse to bypass I have a 95 civic
Chance Camden I have never driving a 95 but you are going to buy pass the main battery and the Engine one 80 and 60 I think
Do you know which fuse is the efi on a civic 2000
not off the top of my head hondas usually label the top of the fuse box on witch is witch
got a question on a 01 Pontiac Sunfire. how do u move the brainbox from its Factory location to the safe location? mine Is right in front of the passenger tire.i thought about putting spray fmove around it .
thanks I'll try that.
good luck
10.000
what
Does creasing a car help?
inkZz Clan yes but if you have to know how you want the car to bend because if crease it to bend the same way you want it to bend ( in the back )
Doors and fenders yes 100% it helps
To prove the point crease one side and then kick it then kick the other side that is not creased and see the different
Even folding the doors helps a lot
zacks workshop I always just fill my frame full of steel car never bends!!
inkZz Clan lol can't tell people to do that lol but your right fill full of steel and it will never bend lol
zacks workshop works great then fill it with foam insulation can't see it
I think civics are defferent because I helped make one and after the derby the engine was basically a bumper by the end and that car was stock as stock can be
Derby4life80z Civics are the same 88-2005 ish only difference is that there sub frame does not go to the front of the frame like the accords it's only a k frame not a complete subframe