How to Get Your Car Ready for Drifting

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии •

  • @stijnpeeters8430
    @stijnpeeters8430 8 лет назад +2037

    This is the only channel i can watch a 17 minute video without getting bored
    Nice work!

    • @bluedeffa8226
      @bluedeffa8226 8 лет назад +18

      Same

    • @chrisfix
      @chrisfix  8 лет назад +240

      That is awesome! I put a lot of work into these videos so they are not boring. I have watched this video about 25 times though while editing so I can make sure it is interesting and not boring. I really appreciate the support!!!

    • @sonnybleakley5164
      @sonnybleakley5164 7 лет назад +19

      ChrisFix your the best youtuber you do epic videos and they are not boring like over car channels

    • @reinhardgaming661
      @reinhardgaming661 7 лет назад +12

      ChrisFix show your face

    • @courtneylight2744
      @courtneylight2744 7 лет назад +2

      Stijn Peeters de

  • @maxhacks2942
    @maxhacks2942 4 года назад +300

    here's a simplified guide :
    - Install an advanced stereo system in your car
    - volume 100
    - blast eurobeat

    • @carrieso3853
      @carrieso3853 3 года назад +2

      COOL

    • @TollyKipper
      @TollyKipper 3 года назад +8

      FOREVEEEERRR
      TOGEEEETHEEERRRR

    • @n0b.
      @n0b. 3 года назад +1

      @@TollyKipper CRAZY ON EMOTION

    • @marclucky5210
      @marclucky5210 3 года назад +5

      DEJA VU

    • @Epic_R3K47
      @Epic_R3K47 5 месяцев назад

      DON'T STOP THE MUSIC!!!!

  • @doit_vehicles
    @doit_vehicles 6 лет назад +738

    Only ChrisFix uses a torque wrench for a fire extinguisher bracket

    • @chrisfix
      @chrisfix  6 лет назад +203

      That would be very bad if it vibrated loose!

    • @doit_vehicles
      @doit_vehicles 6 лет назад +18

      agree :)

    • @sarmadqureshi8900
      @sarmadqureshi8900 6 лет назад +4

      true

    • @simenskaar5843
      @simenskaar5843 6 лет назад +24

      im not late i promise, but he didnt torque just the bracket, it was attached to the seat, so really he torqued the seat down not the bracket

    • @sarmadqureshi8900
      @sarmadqureshi8900 5 лет назад +4

      @@simenskaar5843 yes

  • @lynziethompson5611
    @lynziethompson5611 6 лет назад +8

    Y’all I’m a 16 yr old with a big ass boat for a car (Mercury grand marquis). I have no desire to go drifting anytime soon but here I am, 2:30 am, binge watching these videos. I appreciate all of them. Mad respect (:

  • @debbiedoesanything1976
    @debbiedoesanything1976 7 лет назад +40

    As a woman, I wanted to learn basic stuff for automobiles, but you're so nice to watch and hear that I just like to come here and listen to you and see you do this kind of stuff even though I never had to do anything to my car, thank you so much and keep the good work.👌

  • @johnwalthall4937
    @johnwalthall4937 5 лет назад +117

    12:02 they way all the torque wrenches clicked simultaneously 🤤

    • @jacobhanekamp2534
      @jacobhanekamp2534 5 лет назад +1

      I loved that

    • @dowhatyouwantidc7791
      @dowhatyouwantidc7791 4 года назад

      I never realized that and I've watched this a lot I can't unheard that now.

    • @atarvhegde5210
      @atarvhegde5210 4 года назад +1

      That is attention to detail by ChrisFix , he must have wasted 10 mins of his time for that 3 seconds clip.

    • @sobcrazy6399
      @sobcrazy6399 3 года назад +1

      I came

  • @nicholaskoenig1089
    @nicholaskoenig1089 8 лет назад +870

    But wait, no thread locker on the zip tie?

  • @gameduck8959
    @gameduck8959 5 лет назад +238

    11:31 how does that not look like it’s going through his finger

    • @alviyunitasari3737
      @alviyunitasari3737 5 лет назад +3

      yea im confused

    • @korveret9186
      @korveret9186 5 лет назад

      Mind blown

    • @meegel
      @meegel 5 лет назад +5

      Yo what the f?! You can tell he’s pushing it in, then you can clearly see it stops half way but he keeps pushing and it should be going through his finger, then he removed his finger but it’s just the end of the bit. What is going on!? I had to slow it down and watch it hella times but it still doesn’t make any sense

    • @aarongrillo4385
      @aarongrillo4385 5 лет назад +3

      Slow it don’t to 0.5x and it sound like he’s stoned out of his mind lol

    • @1ksubswithoutanyvideoschal213
      @1ksubswithoutanyvideoschal213 4 года назад

      GameDuck because his glove his really loose

  • @jneta9712
    @jneta9712 5 лет назад +3

    Im 34, I've always had an interest in automobiles but never dove in, now I can't get enough info and love your channel and ford tech mokoluco, you guys inspire me to wrench on my own stuff, they way you stay organized and break things down into steps helps immensely. I'm building my l winter beast, my 08 ford f 150 and you've inspired me to start a drift ca project.

  • @franksalazar4576
    @franksalazar4576 8 лет назад +30

    If you want to make the shield look even more pro you can add some rubber plumbing insulation along the perimeter. I did that when i made a heatshield for a air filter. Keep up the good work! excited to see what's next!

  • @elnino4398
    @elnino4398 8 лет назад +101

    Finally! I've been rewatching all month waiting for a new vid.

    • @MrCeDouK
      @MrCeDouK 8 лет назад +4

      Same ahaha

    • @AlexGreenwoodUkulele
      @AlexGreenwoodUkulele 8 лет назад +29

      And now it's time to repeat that process... :(

    • @chrisfix
      @chrisfix  8 лет назад +6

      The last video was two weeks ago but the next one should be in a week. This last video (that you just watched) probably should have been 3 different videos because I had over 9hrs of footage which is what too so long. Plus I filmed at the event over the weekend which took a lot of prep.

  • @natalieg9616
    @natalieg9616 5 месяцев назад +2

    i don’t have a car capable of drifting, and probably won’t anytime soon, yet i’ve been binging this series and i haven’t gotten bored once. ur videos help me learn so much prior to my automotive technology class this fall. makes me feel like i won’t be completely clueless.

    • @chrisfix
      @chrisfix  5 месяцев назад +1

      I'm glad you enjoyed the series and you are learning a lot!

    • @DiscoveryDaily
      @DiscoveryDaily 5 месяцев назад

      Go get you a $2000 BMW 3 series, weld the diff and go nuts, when something breaks, come watch ChrisFix and figure it out, best of luck!

  • @futuresoldiers7534
    @futuresoldiers7534 5 лет назад +18

    This is the channel I really love to watch when I have nothing else to watch keep up the good work man

    • @chrisfix
      @chrisfix  5 лет назад +8

      Thanks for the support

  • @nuc
    @nuc 8 лет назад +721

    Hey Chris, could you do a video on how to clean your engine bay? I'm close to buying a car, and would love to know how to clean it :)

    • @straightsixracing
      @straightsixracing 8 лет назад +35

      i gotchu lmao

    • @chrisfix
      @chrisfix  8 лет назад +253

      Yes I will be doing a video on cleaning the engine bay! Stay tuned!

    • @TTetro
      @TTetro 6 лет назад +6

      ilinnu

    • @TRWFacty
      @TRWFacty 6 лет назад +1

      100. Liker

    • @mrrogamer3281
      @mrrogamer3281 5 лет назад +7

      WHAT THE HELL, u watched dis. u make vids on bakugan and beyblade. i use to like beyblades.

  • @DalV
    @DalV 5 лет назад +51

    I like the energy in your voice. I feel encouraged and I’m not even doing the work!

  • @noahjackson665
    @noahjackson665 Год назад +1

    I watched these when I was 10 im now 16 and building a 2025 mustang for comp drifting I'm so glad that Chris fix made these videos

  • @jetta.josh4
    @jetta.josh4 8 лет назад +166

    Congrats, Chris, your video got on the RUclips trending page!

    • @chrisfix
      @chrisfix  8 лет назад +21

      +Josh _ thanks a lot!!! That is because you guys are awesome and watch the whole video! So thanks for the support!

    • @jetta.josh4
      @jetta.josh4 8 лет назад +3

      I appreciate you! Your videos are very informative but I wish I could find a channel with someone who has an 04' Explorer just as I do. That dash video helped me out but I can't really find much more if I wanted anything else.

    • @chrisfix
      @chrisfix  8 лет назад +3

      The truck I have is the exact same thing as the explorer. Same frame same engine (unless you have the larger engine), same electronics, etc.

    • @jetta.josh4
      @jetta.josh4 8 лет назад +1

      What truck is it if it isn't an explorer? I've got the 4.0L V6.

    • @chrisfix
      @chrisfix  8 лет назад +3

      Ford Ranger, Mazda B3000, Ford Explorer, etc are all on the same frame.

  • @DiyTech99
    @DiyTech99 8 лет назад +1009

    Finally, A Video From Chris fix.
    Who's Excited.

  • @jaferlastname1760
    @jaferlastname1760 8 лет назад +1268

    Why am I watching when I dont have a car?

  • @yatakara7675
    @yatakara7675 4 года назад +1

    I found your channel by searching how to start a sitting car. I needed to know because I mentioned an old 71 mustang to my cousin who has a 66 mustang and I told him I was going to ask for it since it’s been in a field for 7 years..could be there for way more than 7 years and we are interested in getting it in a new shape. Now I’m a huge fan of yours

  • @wifi2166
    @wifi2166 8 лет назад +15

    This channel and vids are so amazing and so underrated. I love the effort and passion you put into your vids. You even go out of your way to show problems we might encounter, alternatives and demonstrations. I really hope you're banking from this and doing well for yourself cause you deserve it.

  • @timmycekovic
    @timmycekovic 8 лет назад +88

    Another amazing video Chris

    • @chrisfix
      @chrisfix  8 лет назад +6

      +Timmy Cekovic thanks

    • @aidanobrien9116
      @aidanobrien9116 8 лет назад +1

      uploaded later

    • @jugostran
      @jugostran 8 лет назад +4

      Mustang?Drifting?Plz don run over the crowds and smash into the tree....
      Good luck...

    • @caesarves
      @caesarves 8 лет назад

      Christopher Repair,
      You have so much molybdenum in your oil that you should get a steering wheel that says Momo on it. Get it? Get it? Because of the molybdenum, see?
      Yes.

  • @Ozziepeck11
    @Ozziepeck11 8 лет назад +107

    you didn't re-paint the drilled holes, rust, lots of it.

  • @phosphorus_2v
    @phosphorus_2v Год назад +2

    My first drift event is March 25th, this video was hella helpful on getting my New Edge ready to pass tech inspection especially since we're both running SN95s. Still a valid video 6 years later!

  • @cesarcantu9001
    @cesarcantu9001 8 лет назад +95

    You forgot Chrisfix stickers they add 35hp+

  • @Reversifyy
    @Reversifyy 5 лет назад +16

    My dad always dreamed to drift, Thanks for uploading dis vid Chris Fix!

    • @chrisfix
      @chrisfix  5 лет назад +6

      Thanks a lot! Hopefully he can start drifting soon!

    • @Reversifyy
      @Reversifyy 5 лет назад +9

      @@chrisfix He started to drift Chris Fix! I was in the car, it felt so amazing!! We messed up a couple of times, but now it was great!! Thank you so much for this video, My dad was going to cry. I appreciate you.

  • @dadoubledeuce
    @dadoubledeuce 8 лет назад +8

    Good job on bending the aluminum. The heat shield came out very nice. Just as a cautionary note aluminum can fatigue over time and the vibration from pushing the car could cause cracking at your bend points. Although not super likely it is something to keep in mind and you may want to check it every once in awhile. Keep up the videos your doing a great job!

    • @chrisfix
      @chrisfix  8 лет назад +5

      Thanks a lot and thanks for the tip! I will keep an eye on it for sure!

  • @TimJmoto12
    @TimJmoto12 7 лет назад

    ill never understand the dislikes on this guys videos.. insanely thorough and no lack of effort on video editing. A+ Chris

    • @chrisfix
      @chrisfix  7 лет назад

      +Tim thanks a lot Tim

  • @Faraonqa
    @Faraonqa 8 лет назад +376

    How to drift. Step 1 get a mustang. Step 2 find crowded area

    • @rafee9442
      @rafee9442 8 лет назад +28

      Only the new Mustangs love crowds (2006+)

    • @aidanobrien9116
      @aidanobrien9116 8 лет назад +2

      ha ha

    • @whoisit9230
      @whoisit9230 8 лет назад +17

      I'm a mustang fan and I find it funny and boring at the same time

    • @DavidScheiber
      @DavidScheiber 8 лет назад +19

      step 1
      get GTR
      step 2
      Tokyo rush hour
      just watch out for a gray Mercedes Benz

    • @slaveOfAllah.-
      @slaveOfAllah.- 8 лет назад

      XD LOL

  • @trashcarfj45
    @trashcarfj45 5 лет назад +95

    Mustangs are a HIT with the crowd

  • @GianniAdduci
    @GianniAdduci 8 лет назад +5

    The production quality in these videos are amazing. Keep up the good work

  • @Naren50
    @Naren50 2 года назад +1

    You're legit the only one that I could watch for half an hour straight without getting bored ;)

    • @chrisfix
      @chrisfix  2 года назад

      I'm glad you find the videos that entertaining! Thanks a lot!

    • @venom_295playz
      @venom_295playz Год назад

      @@chrisfix wait you still heart comments on your old vids. Thats awesome!

  • @neonaffliction
    @neonaffliction 8 лет назад +44

    Why you didn't check blinker fluid?

    • @109number9
      @109number9 8 лет назад +3

      It's a drift car, it doesn't need it

    • @chrisfix
      @chrisfix  8 лет назад +4

      +neon lol it's not required in the rules...

    • @neonaffliction
      @neonaffliction 8 лет назад

      ChrisFix You should give them idea about how blinker fluid is imporant :DD

    • @Liowen
      @Liowen 8 лет назад

      Yes but you need fresh muffler bearing fluid, that is in the rules. Also make sure to drain out all the summer air from the tires if you store the car, don't want the tires exploding from the winter air getting in with the summer air.

    • @joshuamechtly2288
      @joshuamechtly2288 5 лет назад

      I was about to comment the same thing

  • @volche_art9165
    @volche_art9165 4 года назад +5

    Ahhhhh the good ole days it has been already 4 years since this video was uploaded i remember watching it when it came out

    • @chrisfix
      @chrisfix  4 года назад +2

      Thanks for the ongoing support!

    • @EqyanSaeed701
      @EqyanSaeed701 6 месяцев назад

      it's been 7 years.. Love it And I Miss it..

  • @mohammadalnoobi5659
    @mohammadalnoobi5659 8 лет назад +20

    Thanks god I was waiting for your videos daily I check your channel and check what I uploaded am so excited ❤️❤️
    Biggest Fan from Dubai

    • @mohammadalnoobi5659
      @mohammadalnoobi5659 8 лет назад +5

      Thumbs up 👍🏽

    • @chrisfix
      @chrisfix  8 лет назад +1

      Thanks a lot Mohammad! I really appreciate the love and support!!! Thanks for the shout out from Dubai!

  • @CharlieD34
    @CharlieD34 2 года назад +2

    In my opinion the driftstang is the best car he has made and now i like 1999 mustangs more than any other gas coupe.

  • @matthewbowen2345
    @matthewbowen2345 8 лет назад +47

    I think the aesthetics of the tow hooks are pretty awesome I like em.

  • @BeControversialAlways
    @BeControversialAlways 7 лет назад +45

    "Let's see this drift-stang get sideways!"
    Famous last words.

  • @TrippHammer12
    @TrippHammer12 3 года назад

    Im 14 and I watch this just to get knowledge about cars and how to repair, prepair for my future self. This is very interesting and I admire your lifestyle.

  • @Poopeepooo123
    @Poopeepooo123 8 лет назад +45

    1. watch a ton of drift.
    2.get rid of your honda
    3. buy a rwd car
    4. fully built suspenion first.
    5. go race from a roll on the hi way like 99% of the people talking about drift and lose to a stock same car as yours with a intake only mod.
    6. get mad.
    7. go try drifting for real and crash into a tree.
    8. back to stanced out honda jdm like yo.
    FIN

    • @liam3071
      @liam3071 8 лет назад +4

      Whats better than drifting? Vtec yo!

    • @donald_ts
      @donald_ts 8 лет назад +1

      FIN

    • @chrisfix
      @chrisfix  8 лет назад +17

      Sounds like a new series for a TV show!

    • @asmercan3589
      @asmercan3589 8 лет назад

      Тo rеturn bаck tо уоur ех, рrоvеn а grеаt рrоgrаm. I dеееefinitеlу rесommеnd thаt yоu rеviеw. Тhis рrоgrаm is bоth for mааааlе аnd fеmаlееs.. Gо hеrе => twitter.com/683c62ee2285c4dc9/status/790853501416935424 Hоw tо Gеt Yоur Cааааr Rеаdу fоооr Drifting

  • @JaZoN_XD
    @JaZoN_XD 8 лет назад +37

    When will the cleaning engine bay video come out? I've been waiting ever since you've mentioned it >.

    • @nikolasm3300
      @nikolasm3300 8 лет назад +2

      I heard that you can kill sensors on newer engines if you steam, use a rag, be careful not to get dirt in anything.

    • @Stale_Mahoney
      @Stale_Mahoney 8 лет назад

      this is why you dont buy new cars xD

    • @undeadexplorer6074
      @undeadexplorer6074 8 лет назад +1

      Degreaser and some brushes. Its not rocket science. Cover your fuse box and air box. Take a pressure washer to the rest, maintain 8+ inches away, be smart and it'll come out great.

    • @chrisfix
      @chrisfix  8 лет назад

      I am not sure on the date but relatively soon! In the month of October is the goal!

  • @eghty8fox780
    @eghty8fox780 8 лет назад +145

    hey guys Chris fix here and today I'm going to show you how to put gas in your car now the first thing you need to do is look for your owners manual if you don't have one then God help you ok that's it for this week

  • @hauderr
    @hauderr Год назад +1

    i love that you still reply to comments on a 7 year old video, looking forward to the turbo on the del sol and the supercharger on the stang, stay strong king

    • @chrisfix
      @chrisfix  Год назад +1

      Thanks a lot! Stay tuned!

  • @internaltone
    @internaltone 3 года назад +3

    This guy loves his thread lockers 💙

    • @Vennz.V2
      @Vennz.V2 3 года назад

      What an absolute mad lad. Still hearting comments to this day

  • @Najeezusbeats
    @Najeezusbeats 8 лет назад +16

    I have been waiting for a video from you ☺🙂

    • @chrisfix
      @chrisfix  8 лет назад +12

      +Harriis 23 thanks for the support!

  • @aaronpeople101
    @aaronpeople101 8 лет назад +13

    that trailer hitch will also add some rigidity to your frame

    • @seantierney8145
      @seantierney8145 8 лет назад +3

      Make the trailer your self!

    • @ITSTIMETOSTOP
      @ITSTIMETOSTOP 8 лет назад +3

      Not really.

    • @aaronpeople101
      @aaronpeople101 8 лет назад +3

      how come?

    • @M3iscool
      @M3iscool 8 лет назад

      Because it's a tiny bar of steel just bolted on to the bumper with four bolts.

    • @aaronpeople101
      @aaronpeople101 8 лет назад +6

      The bar is thicker than the frame, I find it hard to believe that it isn't offering up some structural support.

  • @Finley-nl6yv
    @Finley-nl6yv 5 лет назад +1

    The best channel to annoy my mom about cars thanks Chris fix

    • @andrewhill1570
      @andrewhill1570 5 лет назад

      Jayden and Finley Football and more same lol

  • @JohnnyBlaze6954
    @JohnnyBlaze6954 6 лет назад +4

    Once again I must THANK YOU Chris for helping me with my car questions! You’re my GO-TO person for my maintenance needs!

  • @superdoge5620
    @superdoge5620 8 лет назад +33

    Thanks for the vid! Can't wait to do this to my Prius

  • @bbminetesting6837
    @bbminetesting6837 5 лет назад +5

    You use a hard drive magnet? Nice! I have loads of those from all the various hard drives I've destroyed.

  • @boarhunter2999
    @boarhunter2999 6 лет назад +1

    Watching your videos makes me super excited for when I get my own car because you show how much you can easily customise your vehicle!

  • @treal512
    @treal512 8 лет назад +5

    Chris, I love the custom aluminum shield!! I've been wanting to buy something (easier than DIY, right?) to shield my non-CAI SRI from engine heat and haven't found anything to help with that. Looks like I'm going to take the same route as you now.
    Btw, your videos rock, man. Very detailed, but not overly (most videos gloss over vital details all day). Coming from an extremely detail-oriented person (detailing, mechanical, etc.), your videos I've seen are absolutely sufficient to get the job done with confidence. Very motivating as well. I'm going to out myself here and let you know I just watched 13 of your videos in one sitting. New sub! GL with the drifting.

    • @chrisfix
      @chrisfix  8 лет назад

      Thanks a lot man and welcome aboard!

  • @jacobhanekamp2534
    @jacobhanekamp2534 5 лет назад +11

    13:23 Adam LZ learned this the hard way

  • @padraigrab08
    @padraigrab08 5 лет назад +18

    I feel old. this video came out 4 YEARS ago

    • @timj.
      @timj. 4 года назад

      And this comment is six months old

    • @yzstormer
      @yzstormer 4 года назад +1

      And this comment is 6 days old

    • @padraigrab08
      @padraigrab08 4 года назад +1

      StormGaming coincidence??

    • @yzstormer
      @yzstormer 4 года назад

      Maybe???

    • @padraigrab08
      @padraigrab08 4 года назад

      NOT

  • @brendan805
    @brendan805 7 лет назад

    I think i can watch these long videos of his because he keeps talking, he doesn’t give you time to get bored and I love that!!

  • @aamir3926
    @aamir3926 8 лет назад +8

    Chris are you going to get a roll cage?

  • @shanawarali911
    @shanawarali911 7 лет назад +4

    I love the driftsting/mustang gt project its fun to watch

  • @igotcrabs101
    @igotcrabs101 8 лет назад +8

    Hey chris, i have a 69 chevelle i got off a guy last year, and the engine is horribly dirty. Oil is all over, and i want to know what your best advice would be for cleaning it? If you want i can take a pic and send it to you some how

    • @dantrr
      @dantrr 8 лет назад +2

      He has an engine supercleaning video.

    • @igotcrabs101
      @igotcrabs101 8 лет назад

      No, i havent seen one on his channel

    • @undeadexplorer6074
      @undeadexplorer6074 8 лет назад

      cover up any electrical/the airbox and use degreaser and small brushes plus a hose

    • @TRX450RVlogger
      @TRX450RVlogger 8 лет назад

      Usually it's not the Oil pump. It's almost always the Rod bearings and Crank Bearings clearances have become much larger and loss of Oil Pressure.

    • @chrisfix
      @chrisfix  8 лет назад +19

      I will be doing that video very soon! Stay tuned!

  • @paulpak1
    @paulpak1 7 лет назад

    I just subscribed and started watching ChrisFix videos thinking, "Hey, I've got a minute or two to kill... Let me start one up!". Before I know it, 45 minutes has passed and I'm late for whatever I'm doing. When watching someone knowledgeable who has the gift to teach and explain (a rare thing), you just get sucked up into watching the whole damn thing. With that said, it was the best 45 minutes of my RUclips life.
    Nice work, ChrisFix. You deserve your subscribers.

  • @Mar093
    @Mar093 8 лет назад +117

    Build your own trailer video!!!

  • @kynhan9863
    @kynhan9863 8 лет назад +24

    Engine block washing video coming up next ???????

    • @marlinkleber8245
      @marlinkleber8245 8 лет назад

      Pretty self explanatory use a brush and hose don't get any electrical stuff wet

    • @kynhan9863
      @kynhan9863 8 лет назад +4

      +Marlin Kleber I meant his driftstang's engine is dirty.

    • @Team_Nico_Motorsport
      @Team_Nico_Motorsport 8 лет назад

      +Marlin Kleber dont use water

    • @sniperer72
      @sniperer72 8 лет назад

      engine degreasers often call to use a hose to wash down the engine

    • @103underwood
      @103underwood 8 лет назад +1

      +Potatolumoc why is it all professional detailers POWER WASH and engine if your not supposed to use water? dont drive when it rains either right?

  • @pdid44569
    @pdid44569 8 лет назад +26

    Chrisfix logic: "I might buy a trailer or just build my own."

  • @VetteDaily
    @VetteDaily 6 лет назад

    Just ordered the helmet for myself. YOU are why I'm taking my car to the track for the first time 4/28!!! Keep it up!!!

  • @3piece_Z
    @3piece_Z 4 года назад +5

    Hey Chris! Great video as always. Your videos are so informative and entertaining. I can't wait to get my car so I can get it ready for drifting! You give me so much confidence on doing projects on my car I'll be getting. Keep up the great work.

  • @ricardoquezada3109
    @ricardoquezada3109 8 лет назад +16

    I mounted the fire extinguisher on the roof it fell and knocked me out

  • @philipthemaddenman
    @philipthemaddenman 8 лет назад +9

    Hey Chris I love watching your videos and doing jobs on my moms and my grandmas car. The two vehicles have scratches and little dents in the car, and both cars haven't really been fixed or had any oil changes so as I get older I'm really starting to like cars and I love to work on them not just to work on them but to save money for the whole family. My name is Philip I'm 14 years old I was watching your tool video and I just wanted to ask what is a good company to by from thanks. Philip

  • @lucasaldrich5949
    @lucasaldrich5949 8 лет назад

    I have a 1980 Yamaha G1 golf cart. I'm trying to make it into a drifter just for fun. It's yellow with black stripes. I don't if this has been attempted yet, but if it hasn't this will be the first properly built drifting golfcart. It has the original 215 CC 2 stroke engine, when I get the money I'm gonna get the engine fully rebuilt or I'll get a bigger engine that makes more power which is what I might do because there aren't many performance parts for my particular golfcart, all I found was a bigger carburetor, light weight clutch, and a loader exhaust that is lighter than stock, all of that won't do much but the clutch will be a big help. It does have a quite long wheel base so I don't think I'll have to worry about flipping over much. I'll try to make a video of the golfcart for you, you'll really like it.

  • @sc5691
    @sc5691 5 лет назад +4

    that tow strap looked like the driftstangs tongue 😂🤘🤘🤘

  • @cjgarcia1100
    @cjgarcia1100 8 лет назад +14

    1:10 THAT TRANSITION THO

  • @iiraiyen
    @iiraiyen 8 лет назад +4

    No hand reveal, he covered his hands he did- Yoda *Love ya vids man*

  • @FREE_ELZ_2
    @FREE_ELZ_2 2 года назад +1

    These videos are old, but are still cool to watch.

  • @dudebar5052
    @dudebar5052 8 лет назад +24

    Hey chris, Are you going to be drifting with an open differential? You should probably swap it fora limited Slip differential

    • @chrisfix
      @chrisfix  8 лет назад +12

      This car has an LSD stock. It is a GT.

    • @dudebar5052
      @dudebar5052 8 лет назад +2

      really?? I didn't know the GTs came with a LSD, my v6 has an open diff :(

    • @dudebar5052
      @dudebar5052 8 лет назад +2

      BTW, you will do awesome drifting! :)

    • @chrisfix
      @chrisfix  8 лет назад +7

      Yea the GTs came stock with an LSD. Thanks a lot man!

    • @pfoxhound
      @pfoxhound 8 лет назад

      Hello! Could you do the video about how to install in line filter for steering wheel or atm, Oil catch can. my car doesn't have easy access to atm filter. so I found that some guys install a in line filter between atm and transmission radiator to partially cover filtering question. Thank you! Your videos are awesome!

  • @theshawnofficial6180
    @theshawnofficial6180 8 лет назад +22

    Why didn't you call it project crowd control?

    • @chrisfix
      @chrisfix  8 лет назад +22

      +Shawn Burnham it is Project Crowd Control but the car's name is the DriftStang

    • @joseespinosa2290
      @joseespinosa2290 8 лет назад

      Clever as hell Chris!

    • @vrintex
      @vrintex 8 лет назад

      It should really be called the Dang though

  • @mr.yeetfixesacar5224
    @mr.yeetfixesacar5224 4 года назад +7

    People when they make a drift car: I call this the supercorvette
    Chrisfix: I call it the driftstang
    The driftstang: hey guys driftstang here!

  • @siddhant4035
    @siddhant4035 7 лет назад

    i am just a 16 year kid I have subscribed because I found your videos oddly satisfying. keep up the good work bro .

  • @JDPlonk
    @JDPlonk 8 лет назад +14

    U need to weld the diff and put in a roll cage next

    • @crysiscontained4421
      @crysiscontained4421 8 лет назад +3

      ya if he want to explode the case and buy a complete new diff, in all seriousness dont ever cheap out and weld the diff unless you have the money to keep replacing it case an all just get a decent LSD they are a shit ton cheaper to just rebuild and last a whole lot longer but the roll cage is definitely a must if you are going to be drifting a lot

    • @Imaboss8ball
      @Imaboss8ball 8 лет назад +6

      +Crysis Contained I've never heard of a welded diff failing. a LSD is more likely to fail than a welded diff.

    • @271production
      @271production 8 лет назад

      A diff that is welded properly doesn't come apart and is strong as shit. Good welds are stronger than metal

    • @weiwu1442
      @weiwu1442 8 лет назад

      OG Japan drifters almost never use a welded diff

    • @COCarDude
      @COCarDude 8 лет назад +1

      Welded is the only way to go. My new LSD got cooked in 2 events of hard driving/drifting.

  • @cuvkiller
    @cuvkiller 8 лет назад +13

    Lol, next project car should be a drag build haha

    • @chrisfix
      @chrisfix  8 лет назад +4

      +cuvkiller maybeeee

    • @xSupra
      @xSupra 7 лет назад

      lol drifting and then drag thats a huge difference but it would be very cool

  • @109number9
    @109number9 8 лет назад +4

    You should meet up with haggard garage!

  • @gavinc8635
    @gavinc8635 Год назад

    6 years later and I still love to rewatch the project car vids!

  • @galraz5037
    @galraz5037 8 лет назад +7

    what abut the turbo install?????

  • @dwolf97
    @dwolf97 8 лет назад +18

    please tell me im not the only one that noticed how bad the front tires were

    • @lukeziom1763
      @lukeziom1763 8 лет назад +1

      nope. youre not alone on that one at least.

    • @spoonyspoonicus4648
      @spoonyspoonicus4648 8 лет назад +2

      he is likely going to put a good set on the front and put them on the rear to be destroyed anyway.

    • @chrisfix
      @chrisfix  8 лет назад +5

      I got new ones (check out the thumbnail where I am sitting on them).

    • @lukeziom1763
      @lukeziom1763 8 лет назад

      Haha true - noticed now when i had a look. I know ure not suicidal anyway. Fact u had em on vid doesnt mean you would drive them anyway.

  • @kurzjames
    @kurzjames 7 лет назад +10

    I started laughing when he started pulling his truck :D

  • @brendancross4655
    @brendancross4655 4 года назад

    Even in fall of 2020 this video is one of my faves, pure classic.

  • @keizu.
    @keizu. 8 лет назад +148

    Rip crowds

    • @vinnylagana2280
      @vinnylagana2280 8 лет назад +3

      Shoduh [Content and stuff] you can't say that if your picture is a roblox character...

    • @keizu.
      @keizu. 8 лет назад +29

      Just did

    • @davidconde1521
      @davidconde1521 8 лет назад +24

      get rekt m8

    • @SFH_Jenkins
      @SFH_Jenkins 6 лет назад +2

      Just because you can't drive a Mustang doesn't mean that nobody can drive one.

    • @ovakonikako7118
      @ovakonikako7118 6 лет назад

      I will not like this because you got 101

  • @slep5039
    @slep5039 8 лет назад +5

    Are you going to lower it?

  • @abdallah_2378
    @abdallah_2378 8 лет назад +24

    Would chris reply?

    • @chrisfix
      @chrisfix  8 лет назад +85

      +Abdallah Sweidan would he? Who knows. I heard he tries to answer his fans!

    • @singert66
      @singert66 8 лет назад +2

      Do you plan on stripping the interior ? I'd advise you to do so , it's a really usefull Upgrade tbh , and it's FREE ! :D

    • @Junior-iq3hk
      @Junior-iq3hk 8 лет назад +2

      Plz tell me your going to swap the exhausts..

    • @v_06_baradkaratharvavinaya70
      @v_06_baradkaratharvavinaya70 8 лет назад +1

      +ChrisFix I know he replied me a couple of times too!and maybe on this comment he will :D

    • @djangobruce
      @djangobruce 8 лет назад

      he needs to put dual flow master on it

  • @szarinamusic
    @szarinamusic 5 лет назад

    A lot of people thing “why use thredloker??1” threadlocker helps keep the bolt in place, and it’s kinda important and makes it safe to use. It’s important for drifting too
    also tow hooks are SO USEFUL!!!!!!!!! chris ur car is now really safe because if your in the desert and your car breaks down you can just attach it. Best invention ever.
    The fire extinguisher under the seat is amazing, because one time my brother was on the track and the front caught on fire and so he immediately just took the fire extinguisher out and went to the emergency
    helmets are good because it protects your head, like in a bike. If you get in an accident, without your brain, you could not eat, hold anything, write, speak, basically anything that requires thinking. Drifting is kinda hard and if you get in an accident at 40 mph, you could seriously get hurt.
    This is to express the importance of racing rules, and why you SHOULD follow it. I agree with Chris with no skipping, because it has to pass safety.
    “Safety is #1 priority” crazyrussianhacker

  • @mrmillan26
    @mrmillan26 8 лет назад +22

    how about cleaning your engine bay?????

    • @brysonmerrell575
      @brysonmerrell575 8 лет назад

      lol

    • @maxm7510
      @maxm7510 8 лет назад

      yes

    • @chrisfix
      @chrisfix  8 лет назад +2

      Coming soon! It is the next cleaning video!

    • @maxm7510
      @maxm7510 8 лет назад +1

      +ChrisFix you're awesome can you please show us how to make a trailer

    • @mrmillan26
      @mrmillan26 8 лет назад +1

      awesome!!!!!!!!

  • @tigerrey9622
    @tigerrey9622 8 лет назад +7

    ill wait patiently for the next video next month •__•

    • @cosmomccaulley7413
      @cosmomccaulley7413 8 лет назад +1

      AND THAT'S THE BOTTOM LINE,CAUSE STONE COLD SAID SO.

    • @chrisfix
      @chrisfix  8 лет назад +2

      +vic rosa I mean if u wait a month you will miss about 3-4 videos I will be posting.

    • @tigerrey9622
      @tigerrey9622 8 лет назад

      lmao

  • @kenster_fr33kmain55
    @kenster_fr33kmain55 5 лет назад +4

    Is that a Fiesta in the background, Chris?

  • @scooupa
    @scooupa 8 месяцев назад +1

    This video is 7 years old but still gold ❤❤

  • @MeowCatProductions1
    @MeowCatProductions1 6 лет назад +5

    Lol are you using a hard drive magnet? 😂
    I thought I was the only one who used those.

  • @mayeri3083
    @mayeri3083 5 лет назад +3

    Wow solid job love how you removed all your bumpers at attached the tow hooks.
    By the way how did your reattach your front foam before the bumper?

    • @Cugy_2345
      @Cugy_2345 4 года назад +1

      If you put on the bumper then you could not get to where you put the foam

  • @sienile
    @sienile 8 лет назад +9

    That front tow strap will rip out of your bumper. It needs to be mounted to the frame.

    • @zebracherub
      @zebracherub 8 лет назад +2

      Haven't you watched the video ? He even tested it himself.

    • @sienile
      @sienile 8 лет назад +4

      That test tow was pathetic. A real test would be to put the rear wheels in a ditch, lock the parking brake, and then pull. Just be prepared for that strap to pop lose and take out your truck's back window.

    • @M3iscool
      @M3iscool 8 лет назад +2

      All I hear is pointless grumbling.

    • @cup_and_cone
      @cup_and_cone 8 лет назад

      Ya, that front hitch would rip right out if it needed to pull the cars weight up an incline while stuck.

    • @chrisfix
      @chrisfix  8 лет назад +2

      That is how all of the SN95 Mustang owners attach the tow hooks. I thought the same thing but they told me they have been yanked out of the mud and sand with no problems from the front. Unfortunately, there is not frame on the mustang. it is a unibody design. The front unibody isnt thick enough until the engine k-member which is pretty deep into the car and not realistic to tow from.

  • @AndyE30
    @AndyE30 7 лет назад

    Yoo you helped me get into the drifting scene with my second car (300zxTT) with these vids. I never grew up around cars, but I decided I had to start somewhere. Every little thing I can learn betters me in some way. Keep up the great work!

  • @xiaomantou5981
    @xiaomantou5981 8 лет назад +15

    will you consider welding your differential

    • @vdubornothing6247
      @vdubornothing6247 8 лет назад +3

      its already has a factory lsd

    • @24vp
      @24vp 8 лет назад

      ford traction-lok in the ass end they made some bad ass differentials why the hell would you weld it unless your only gonna drive it on the track back country roads are gonna maneuver horribly with it welded save welded diffs for off road mud mowers

    • @chrisfix
      @chrisfix  8 лет назад +4

      It's an LSD

  • @IMDYT420
    @IMDYT420 4 года назад +3

    11:32 I thought that but was going thru his finger 😳

    • @chrisfix
      @chrisfix  4 года назад

      They aren't sharp enough for that lol

  • @abbysapples1225
    @abbysapples1225 8 лет назад +5

    Looks like the drift stings tongue is sticking out. lol 9:30

  • @raquel8756
    @raquel8756 7 лет назад

    I would say you are my #1 Famous Car mechanic on RUclips!

  • @Sianpii96
    @Sianpii96 4 года назад +8

    who's watching in May 2020?