Young man, I have to said that you are very talented, keep making and shearing the projects I assure you that by doing that you are contributing to inspire others to do exactly that, because it is what we need, because we need a better place to live and we all are going to be happier, thanks to you and all the great people that build and share the beautiful projects that we see in in this channel I salute you and wish you the best that our world has to offer and enjoy it you deserve it. Thank you. Have a wonderful life you and your family.
Сзади надо дополнительно сделать стопор ,чтоб колесо случайно не выскочило ,надо сделать специальный ролик натяжении цепи (цепь со временем растягивается и может соскочить ) и обязательно цепь накрыть защитным кожухом + тормоза . А идея класс !
Идея гавно, мотор жрёт 7 кВт, а едет 62 км/ч. Для сравнения мотоцикл на моторе с постоянными магнитами и таким же потреблением едет 130 км/ч и разгоняется гораздо шустрее
@@rubenhayastan4854 не имеет значения) Можно поставить на этот самокат мотор 3 киловатта и он не будет выглядеть как - то не так, и занимать много места. При этом развивать скорость можно будет в районе 85 км/ч
the default cooling is just not enough. I use 75100 on my scooter too, and I 3d printed a new case just to stick some cooling fins on the mosfets. Planning to add water cooling in my next build.
Was searching for how to build an electric scooter from scratch for my channel and came across this. Great video bro. Well done. maybe next time you can use plastic spacers between the batteries to prevent possible shorts if the rubber on them fails.
I LEARNED HOW TO BUILD THIS PACK AND HAVE BUILT 350 PLUS OF THEM IT GETS EASIER WITH THE NEW SPOT WELDER THEY HAD ME SOLDERING BY HAND 3 weeks straight.
Can you give us an update? These RC motors tends to heat up a lot without proper cooling, how is yours? Okay about the controller temperature, but i am also worried about motor's. Especially in hillclimbs?
Hi also I'm testing the 75100, I noticed that by running the hub motor with the battery cables disconnected, the controller still turns on and gives power from the 5v and 3v outputs, can you check if this happens to you too?
@@albertnario4877 Thanks for the reply, i hadn't thought about it, i have to try to disable the regeneration, it's not a great thing anyway, it would take a system to really leave it off, as it is now my tft display turns on and off every time i move.
boss tanong ko lng kaya ba nang controller yung motor hub na 60v/72v 3500watts?.balak ko kasi ilagay sa fiido q1s ko boss para less space...at sakay last question boss..saan ka nakakabili nang lithium battery?salamat sa pag sagot..
We purchased this Vivi 27.5” electric bike and a Tentaquil 26” electric bike for our 13 and 14 year olds. ruclips.net/user/postUgkxUiL0GnyDjP32RJdd660sP8mZk4CRLTCJ The Vivi was much easier to put together. With the Vivi, there was a video link to assist with assembly which made the process easier to follow (we did put the handlebars on upside down, but it was a quick and easy fix). With the Tentaquil, the assembly was not as simple to follow, but after we messaged the company for an assembly video, it was easier and they did respond quickly. The other major differences were that the Vivi has a grip throttle on the right handle (like a motorcycle) and the Tentaquil has a push throttle that you use your thumb to activate. The monitors were also different, so if you’re looking for something specific in terms of changing the bikes functions, pay attention to what the monitor offers. We were really impressed with the overall quality and functionality of both bikes, but if you’re looking for more power and an easier assembly, definitely go with the Vivi!
Bro u need a chain tensioner maybe spring loaded at the back because the wear and tear after a while the chain could miss a cock and BOOM dangerous at any speed also I'd of gone for slightly larger motor considering the amount of batteries... also I'd have it water cooled also I'd have another motor as an alternator pumping electricity as a dynamo and solar panels on it while it sits in the sun recharging also...good luck oh also I would of used the batteries inside the tubing of the frame itself also...
Young man, I have to said that you are very talented, keep making and shearing the projects I assure you that by doing that you are contributing to inspire others to do exactly that, because it is what we need, because we need a better place to live and we all are going to be happier, thanks to you and all the great people that build and share the beautiful projects that we see in in this channel I salute you and wish you the best that our world has to offer and enjoy it you deserve it. Thank you. Have a wonderful life you and your family.
Thanks for the kind words!
Incredible build mate! It's incredible how much power those little motors can put out, I'm looking into getting one for a scooter myself
if you still want to build something like this Id highly recommend a QS 90 mid drive about 2,76 times m,ore power than this and as cheap
Assalomu Alaykum Uzbekistondan ota onanggizga rahmat boshqalar ham ulashganinggiz uchun rahmat ixtirolar va yangiliklarda charchamang omad
Сзади надо дополнительно сделать стопор ,чтоб колесо случайно не выскочило ,надо сделать специальный ролик натяжении цепи (цепь со временем растягивается и может соскочить ) и обязательно цепь накрыть защитным кожухом + тормоза . А идея класс !
В чём идея, что первый раз электросамокат видишь?
@@hiwe4ka503 Человек сделал и на этом молодец .А ты дальше в космос летай ,может лет через 100 может придумаешь ,как на Марсе помидоры выращивать ?😀
Идея гавно, мотор жрёт 7 кВт, а едет 62 км/ч.
Для сравнения мотоцикл на моторе с постоянными магнитами и таким же потреблением едет 130 км/ч и разгоняется гораздо шустрее
@@ravedjmixes6495 согласен ,но мотоцикл это же не самоделка совсем другая категория .
@@rubenhayastan4854 не имеет значения) Можно поставить на этот самокат мотор 3 киловатта и он не будет выглядеть как - то не так, и занимать много места. При этом развивать скорость можно будет в районе 85 км/ч
Has always been an excellent video to show how to diy an electric scooter! Thanks for review our fsesc 75100 foc , motor 6384 and spot welder!
Tt6
Funciona con una batería de coche?
@@antoniocano9473 It is ok for the battery voltage not to exceed 20s, please use it within the specification
@@FlipskyTech gracias
The compact homemade car is very powerful. You made it very well. Thanks for sharing.
Glad you like it 😁
Small reverse spoiler over the controller directing airflow onto it perhaps. Great build.
Galing! Pede ka na magtayo ng tindahan ng custom-made e-scooters!
the default cooling is just not enough. I use 75100 on my scooter too, and I 3d printed a new case just to stick some cooling fins on the mosfets. Planning to add water cooling in my next build.
Mahusay kuya Albert! Galing penge flipsky motor hehe😆
dalawa lang yn, hehe wala nako extra.😅
Udah ku perhatikan beberapa rancangan mu
Hasilnya emang keren
Mantap
Request dong
Scooter 3 roda
Rear 2
Front 1
Biar lebih safety
English please 😅
@@albertnario4877
Indonesia please
😀😀
@Hariyanto
Biuuhh
Mehong juga
It was very good congratulations... I wanted one of these for real, it was better than the ones sold
nice job you manage everything from cutting, boring, electrical, and power using individual batteries
Ни
Wow, that contraption is genius ❤
Excellent! Where Should I get the Motor and the Battery? Thank you
Was searching for how to build an electric scooter from scratch for my channel and came across this. Great video bro.
Well done. maybe next time you can use plastic spacers between the batteries to prevent possible shorts if the rubber on them fails.
😢Привет 😢😅😂у 🎉😮🎉😅
😂🎉 😮😢😂😅😅
😂
I LEARNED HOW TO BUILD THIS PACK AND HAVE BUILT 350 PLUS OF THEM IT GETS EASIER WITH THE NEW SPOT WELDER THEY HAD ME SOLDERING BY HAND 3 weeks straight.
We can work something together. How do we get in touch
the 48v was already in 5’s in parallel which means you could’ve just did 4 of the 5 parallels and made 72v (20s)
Can you give us an update? These RC motors tends to heat up a lot without proper cooling, how is yours? Okay about the controller temperature, but i am also worried about motor's. Especially in hillclimbs?
So if i don't have all those materials just laying around, how much would this build run me?
The handlebar stem shouldn't be straight vertical.. try to bend it into a slight angle more like a bike, it'll be more stable and better for turning.
Why didn't you install the bms? Do you have any issues without it?
You are a genius 👍🏻
I need one Do you sell online
nope.. 😅
Yes i need too
Wow. Nice battery build.
Hey you think it's possible to put a drive chain motor in back and a hub motor in front, for dual action?
What type of motor is used and what is the control unit? Please advise me, dear. Thank you.
it's already in the video description..
can you please tell which material you used here for the base
and chassis
1.5mm 2x3 tube
Hello, Flipsky 75100 has the erpm setting. What if you don't know the exact erpm of the engine? And is it necessary to provide the exact ERPM value?
Please what is the name of the motor you use, how can I get it?
Hi where do you get the motor from? Im building an electric scooter as well. Thank you.
4:52 simpleng motor mount, gagayahin ko~
hi sir where did you order that flipsky complete set? thank you
description
Você é um gênio, parabéns 👏👏👏
Buna ziua vreau și eu o Patinete cît costă Sint interesat
Can not change sprocket tubed tryer there are some needed improvments
Nice work. Can you help me to put the biggest motor for this vesc please?
I'm wondering how long those welds will last.
Оцинковку варит похеру ему ) был у меня печальный опыт думал сдохну температура как пизданула не пожелаешь врагу будьте аккуратны ребята
Would be nice more detail setup on the settings on the computer can’t get the throttle to work right need help
Hi also I'm testing the 75100, I noticed that by running the hub motor with the battery cables disconnected, the controller still turns on and gives power from the 5v and 3v outputs, can you check if this happens to you too?
when your regen is activated it will power it self from motor.. it bypass the SS switch..
@@albertnario4877 Thanks for the reply, i hadn't thought about it, i have to try to disable the regeneration, it's not a great thing anyway, it would take a system to really leave it off, as it is now my tft display turns on and off every time i move.
Galing nman Sir! Pwdi ba mag work sa inyo?hehehe👌👌
pwede nmn.. haha pano?
Yes after a long time you are building e scooter again 😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀
I hope you enjoyed it.. 😁
Here can't I use 7070 Flipsky BLDC 4200w motor instead of 6384?
Então foi daqui que o Letra Jota copiou o projeto do patinete dele kkkkkk
Mag wowork sya sa BLDC na scooter hub motor? Saka may auto sensing pa din ba sya?
Panalo yung size ng 75100 ah
uo ok yung size nya, pero kelangan pa ng mas magandang cooling mabilis uminit yung controller
Thatcher motor is only 4000w peak? 12s so 48v max?
Name of pc Program used to program ESC? 🤔
vesc tools, it's free for download
Which motor did you use?
SO SICK MAN make more videos of scooters and yes
Can you please note the materials you Used all the details please
Can you integrate in a generator to recharge?
motor it self is the generator you want, it has 600w of regen braking.
Where do you get these wheels from?
12in bicycle wheel.
How you can recharge the battery sir ?
If I want to know the percentage of the battery what I can do?
👍💪🔥👏
Угол наклона вилки маленький , больше трейл надо делать,
13:51 натяжитель цепи нужен .
Idol another great... Turuan mo nako more power and god bless!
how much ung total cost for the battery and motor? not including the metal parts?
Will you sell one?
+1 inscrito no canal 😉👍 👏👏👏
Seria possivel instalar um sensor de cadência?
Nice build Sir!
Battery 72v. 26 000 mAh??
If my calculations are correct.
What bout range?
What kind of accelerator are you using ??
ebike thumb throttle..
That's the beauty of Bataan. Nobody cares that 36v is the street legal limit
How you change the battery 🔋
Very nice, am gonna make one too 😃
Did you make it?
@@kingWisemon nope, my wife got surgery i had to take care of her, until now trying to get back up on my feet finacialy
Can I run motor with heavy battery of vehicle??
Amigo onde eu compro esa ferramenta que vc usa pra escoadreja
good build...good choice of parts too xx
Sir your video much helpful ,I like how you name also what materials you are using, thank u so much
no rear brakes?
This model what company
Lo que no se le vio es que anduviera en el ????????
Please description (detail) part/part thanks
in which country do you live
Philippines
is the motor waterproof?
what is the maximum speed?
boss tanong ko lng kaya ba nang controller yung motor hub na 60v/72v 3500watts?.balak ko kasi ilagay sa fiido q1s ko boss para less space...at sakay last question boss..saan ka nakakabili nang lithium battery?salamat sa pag sagot..
give me the link to buy motor
Speedometer on karke record karke dikhana jara iska speed.
Amazing Work. ❤❤❤❤ Super Speed 🎉🎉🎉🎉🎉🎉
We purchased this Vivi 27.5” electric bike and a Tentaquil 26” electric bike for our 13 and 14 year olds. ruclips.net/user/postUgkxUiL0GnyDjP32RJdd660sP8mZk4CRLTCJ The Vivi was much easier to put together. With the Vivi, there was a video link to assist with assembly which made the process easier to follow (we did put the handlebars on upside down, but it was a quick and easy fix). With the Tentaquil, the assembly was not as simple to follow, but after we messaged the company for an assembly video, it was easier and they did respond quickly. The other major differences were that the Vivi has a grip throttle on the right handle (like a motorcycle) and the Tentaquil has a push throttle that you use your thumb to activate. The monitors were also different, so if you’re looking for something specific in terms of changing the bikes functions, pay attention to what the monitor offers. We were really impressed with the overall quality and functionality of both bikes, but if you’re looking for more power and an easier assembly, definitely go with the Vivi!
5:00 - массу через болты? Зачем?
magkano lahat yung cost ng build boss? ska ano mileage at top speed po? ty
What is THAT?!! @ 13:52
Exelente job .. no only...the millionar Elon musk.... can make electric vehicles....🤝👏👏👏👍
that little motor had alot of power
you need a bigger stronger tires to handle the shaking
Sir.gdmorning, kung mag papagawa aku sayu Yan sir!Ilan ba Yung gasto lahat2x na sir?
It turns out very cool man
El motor se puede comprar en Aliexpress?
Bro u need a chain tensioner maybe spring loaded at the back because the wear and tear after a while the chain could miss a cock and BOOM dangerous at any speed also I'd of gone for slightly larger motor considering the amount of batteries... also I'd have it water cooled also I'd have another motor as an alternator pumping electricity as a dynamo and solar panels on it while it sits in the sun recharging also...good luck oh also I would of used the batteries inside the tubing of the frame itself also...
that chain looking like spongebob inflatable arms
ممكن لي أن اشتري منك وحدة مثلها إذا ممكن ارجو الرد
Add in a rear suspension!
What is the engine type?
Что это за софт для конфигурирования прошивки?
Need to add a chain tensioner
Que velocidad alcanzaste?
Jawad 1. HAPPY BIRTHDAY 🔪🎂🎈🎈🎉🎉🥁🎺🎧
I think It overheated because no balance of energy; too much voltage and not enough current 🤔
Brilliant work
Thanks for information about this idea 👍👍
Nice work man