Electrical Motor Connections
HTML-код
- Опубликовано: 2 июл 2021
- Electrical Motor Connections. How electric motors work, electrical motor connections explained, star delta wye electrical connections on three phase motors. 3ph motor. Learn how they work and why they are used from the basics.
Correction: 5:26 Audio error, should say "230V divided by 20 Ohms" and not "20 Amps" graphics are correct.
👉 👉👉 FREE design software ➡️ www.altium.com/asp/the-engine...
Watch these
AC motors ➡️ • How Electric Motors Wo...
DC motors ➡️ • How does an Electric M...
Alternators ➡️ • How Alternators Work -...
Buy this ➡️ Multimeter electricl.info/Best-Multimeter
Get these ➡️ electricl.info/Best-Elec-Screw...
Use this ➡️ electricl.info/Best-Clamp-Meter
👋 SOCIALISE WITH US 👋
*******************************
👉FACEBOOK: / theengineeringmindset
👉TWITTER: / theengmindset
👉INSTAGRAM: / engineeringmindset
👉WEBSITE: TheEngineeringMindset.com
👀 Links - MUST WATCH!! 👀
*******************************
⚡ELECTRICAL ENGINEERING⚡
👉How electricity works: • How ELECTRICITY works ...
👉Three Phase Electricity: • How Three Phase Electr...
👉How Inverters work: • How Inverters Work - W...
👉How TRANSFORMER works: • How does a Transformer...
👉How 3 Phase electricity works: • How Three Phase Electr...
👉How Induction motor works: • How does an Induction ...
👉What is a KWH: • What is a kWh - kilowa...
👉How induction motor works: • How does an Induction ...
❄️ CHILLER ENGINEERING ❄️
👉Chiller Efficiency improvements: • Chiller Efficiency Imp...
👉Chilled water schematics: • Chilled Water Schemati...
👉Chiller crash course: • Essential Chiller Term...
👉Chiller types: • Chiller Types and Appl...
👉Chillers/AHU/RTU: • How Chiller, AHU, RTU ...
👉Water cooled chiller Part1: • Chiller Basics - How t...
👉Water cooled chiller Part2: • Chiller Basics - How t...
👉Water cooled chiller advanced: • How Chiller works - De...
👉Air cooled chiller: • Absorption Chiller, Ho...
👉Absorption Chiller : • Air Cooled Chiller - ...
👉Chiller/Cooling tower/AHU: • How a Chiller, Cooling...
👉Chiller flow rate: • Chiller flow rate meas...
👉Chiller fault troubleshooting: • Chiller faults - troub...
👉Chiller COP calculation: • Chiller Efficiency CAL...
👉Chiller cooling capacity calcs: • CALCULATE Chiller cool...
👉Chiller compressors: • 🔧 Chiller - Compressor...
👉Chiller expansion valve: • Chiller - Expansion Va...
👉Chiller surge: • Chiller - Surge
👉Chiller condenser: • 🔧Chillers - Condensers
👉Chiller evaporator: • 🔧Chiller - Evaporators
👉Chiller compressor centrifugal: • Centrifugal Compressor...
👉Chiller cooling capacity: • Chiller - Cooling Capa...
🌡️ HVAC ENGINEERING 🌡️
👉HVAC Basics: • Fundamentals of HVAC -...
👉Boilers/AHU/FCU: • How a boiler, fan coil...
👉How Heat Pump works: • How A Heat Pump Works ...
👉Heat pumps advanced: • How A Heat Pump Works ...
👉Fan Coil Units: • Fan Coil Unit - FCU HVAC
👉VAV Systems: • Variable Air Volume - ...
👉CAV Systems: • Constant Air Volume - ...
👉VRF Units: • Video
👉Cooling load calculations: • Cooling Load Calculati...
👉Pulley belt calculations: • Pulley Belt CALCULATIO...
👉Pump calculations: • Pump CALCULATIONS, Flo...
👉Fan and motor calculations: • Fan & motor CALCULATIO...
👉HVAC Cooling coils: • HVAC - Cooling coil + ...
👉Cooling towers: • How Cooling Towers Work
⚗️ REFRIGERATION SYSTEMS 🌡️
👉How refrigerants work: • Refrigerants How they ...
👉Thermal expansion valves: • How TXV works - Thermo...
👉Refrigeration design software: • Refrigeration Design S...
👉Design refrigeration system: • How to DESIGN and ANAL...
👉Reversing valve: • Reversing valve - Heat...
👉How A/C units work: • Basic Refrigeration cy...
⚗️ REFRIGERANTS ⚗️
👉Refrierant retrofit guide: • Refrigerant Retrofit G...
👉Refrigerant types, future: • Refrigerant Types, Iss...
👉How refrigerants work: • Refrigerants How they ...
🌊 HYDRONICS 🌊
👉Primary & Secondary system: • HVAC Primary & seconda...
👉Pumps: • Centrifugal Pump How D...
👉Pump calculations: • Pump CALCULATIONS, Flo...
🔥➡️❄️ HEAT EXCHANGERS 🔥➡️❄️
👉Plate Heat Exchangers: • Plate Heat Exchanger, ...
👉Micro plate heat exchanger: • Micro Plate Heat Excha...
💻 DATA CENTERS 💻
👉Data Center cooling: • Data Center HVAC - Coo...
🔬 PHYSICS 🔬
👉What is Density: • What is Density? - Den...
🎬 DOCUMENTARY 🎬
👉WW2 Bunker HVAC engineering: • Engineering a Top Secr...
⚠️ *These videos take a long time to make* if you would like to buy Paul a coffee to say thanks, link below: ☕
PayPal: www.paypal.me/TheEngineerinMindset
Channel membership: ruclips.net/channel/UCk0fGHsCEzGig-rSzkfCjMwjoin
Patreon: www.patreon.com/theengineeringmindset
No one explain like you in my whole life. great work🙏
Happy to help
@@EngineeringMindset you’re amazing, Paul!
Keep up the amazing educational content 👍🏻
agree with you. i spend my time in degree and still confuse sometimes but this guy make me understand under the video duration. Great work bro!
Explain*
THAT WAS GOOD...I AGREE
I was a motor rewinder in my days in the NAVY. Your videos remind my of the tedious times I spent battling +50hp motors during less than ideal sea states.
It’s 1 video per month but it’s always worth the wait. Great content as always!
Trying to make more per month, the animations take so long though
@@EngineeringMindset Sir: We are thankful for the one a month.
Wonderful informative as usual.
Totally understand the difficulties involved in making such high quality content. Respect to the team!
So much work in making this video! Thank you for taking the time. Very well done.
Glad you enjoyed it!
Agree, many hours must go into making these.
What an clear description to understand. Thanks 🙏
Wow.. thank you for this simple direct explanation.. now I get it!!👍
These videos are more than worth a few bucks. You've got people paying themselves into debt for this knowledge. I was one of em.
Thanks for sharing it with us. Very educative
big thanks for you paul, salute!
Appreciation and thanks Sir, for such a great and good explanation, I never had such experience in my ITI Technical College when i was performing, thanks once again, keep up the good work, God bless you and your family.
Brilliant explanation, thank you!
I'm currently reading a textbook on electromechanical instruments--as a complete newby who's also having to teach himself the math as he goes along just to try and comprehend what I'm seeing at all.
A few pages from where I'm presently at, I've seen the diagrams for delta and star configurations.
Point being . . . .this video--and others you made--is really helping me out!
Thanks!
Electromechanical Energy Devices and Power Systems, by Bala and Yamayee.
("Et Al" sat this one out.)
Great job! Thanks!
Took me five seconds to get what I needed. Remind me that I owe you one! 🤩
Very useful content with great graphic work soo accurate... Great work sir.. God bless you all ♥️✌️😊
Thank you
Super helpful!!! 😊
Nice visuals.
Very clear.
I'm a amateur when it comes to electricity, learned so much.
Wow!!! great explanation
The most clear and neat explaination I've ever seen, continious subscribtion lol
Very glad to hear you enjoy the content
Thanks a lot for great explanations. Please make a video for VFD repairing lab setup( what type of Instrument need for VFD repairing)
Great knowledge of electric motors
Thank you, God bless you
Great work 🥳🥳🥳 Thank you 💜💜💜
very good explanation and easy to understand.
thank you for nice video master!
Great Video and explanation..
like clockwork ,love it !
Nice job.🔝content👏❤️👍🏻
This channel is a world championship, it is a pity that it is not in Polish.🙋♂️👍👏
GOOD explaining video .
Great job :)
Thanks! 😄
Nice explanation thanks 👏
Thank you 😊
Thank you sir 👍🏻❤️
99% good explanation 👏
Thank you so much
Thank you for very informative video. Will be good for me for testing old find motors before dismantling for copper and other metals in my channel
Great work..👍🏻👍🏻👍🏻
Awesome!
Good explanation
Thanks 🙋🏻♂️
Thanks alot brother. Yoi are amazing
Great 👏
Thank you
Thank u 💓
Thumbs up 👍
Cool !
Thanksអគុណបង👏👍😍
Indeed I like teaching may Allah bless you abundantly. I have leant a lot.
Job well done
Awesome content
Good teacher
I love to learn about ac electric machines😋😋
Thanx keep on
I used to teach a class on this subject. It was very hard to keep students engaged, as the information is somewhat dry. Having physical examples is the key to learning this subject.
As a student, I agree.
I agree. Don't think I took one bit of notice in college to this ans now I'm here trying to learn after applying for a maintenence job😂
Good job
thanks
Good video graphics editor
Tks u
អគុណបងthank you
too good
Thanks
Thanks!
Thank you, Mario
nice video bro
I would love be a electromechanic engineer 😍😋
5.29, you said correctly 11.5 Amps but wrote 1.5. Great video by the way.
11.5 is written on screen. The two 1's are close together though so it does look a bit like 1.5
Hey @The Engineering Mindset,
would you care to explain why at minute 4:36 you say that you can add a neutral wire if needed?
Is this a choice you can make?
Brilliant😀
👍 mulțumim
Very interesting so thank you for this. It would be interesting to relate this back to the usage for each configuration - I assume delta is used for higher horsepower motors but where does the cutover occur? Cheers
Here you go ruclips.net/video/h89TTwlNnpY/видео.html
@@EngineeringMindset That was helpful so thanks. I didn't pick initially that you can use the star configuration as a starting point for the delta to reduce inrush current - I thought that they just alternatives. Cheers from Oz.
Next needs to be star delta starters and the time delay switching over. I thought it was super neat when someone explained what it was.
Here you go ruclips.net/video/h89TTwlNnpY/видео.html
കൊള്ളാം ഇഷ്ടപ്പെട്ടു 👍👍👌
Super
Thank you for the explanation and difference between the "Y" and the "DELTA" connections. When would the "Y" connection and the "DELTA" connection be used?
You would wire the motor according to the electrical system you are using( houses are mostly Y). The voltage of the system, and the number of leads on a motor. This wiring is just a 6 lead wiring. examples of other wiring
annawiringdiagram.com/wp-content/uploads/2019/02/3-phase-6-lead-motor-wiring-diagram-wiring-diagram-3-phase-6-lead-motor-wiring-diagram.jpg
@@SACalkins1 Thank you.
There are systems that start in the Wye or Star configuration because of the massive amp draw is reduced, then using some timers and three contactors will set the configuration to Delta because the motor can run faster.
How will the voltage and current differ between delta and star, if the motor is used as a generator?
The star version uses less voltage and less current. Repeat after me, 100 times. On a three phase motor the
star version uses less voltage and less current. Thank you very much.
Informative.
Can you do a series of videos on SCR's/Thyristors please.
As I understand them they are similar a fast "relay" in a small scale.
An SCR is a device that conduct electricity in one direction normally for DC circuits, whereas a Triac conducts in both directions. When gate voltage is applied, the device begins to conduct and the gate voltage can be removed. As long as there is voltage across the anodes. Once the voltage on the anodes reaches zero, the device shuts off and needs to be retriggerd again. Usually a triac also is used with a diac on its gate. A diac is a dual is a dual diode that can have an Resistor/capacitor combination on one end that will delay the turn on of the DIAC/TRIAC combo withing a given time period within the sine wave. This is normally used for light dimmers
Check out NEW resistor video, everything covered! ➡️ ruclips.net/video/DYcLFHgVCn0/видео.html
We don't have terminal boards inside the connection box on three phsse motors in America, just nine wires brought out from the internal part of the motor into the connection box located on the motor external. All nine wires hang individually loose within the connection box and are NOT connected when bought from the motor vendor. Six of the nine wires have their own number designation attached to them. The designation ranges from the number 4 thru the number 9. Each of the remaining three wires have their own designation as well. Those designations are T1, T2, and T3. Sometimes T1, T2, and T3 may just be labeled as 1, 2, and 3, not having the letter "T" attached. Again, the nine wires are connected in the field, inside of whatever piece of equipment/system of which they are a part. Three phase motors are built as multi-voltage motors in America. The two voltages are 230 volts 3 phase and 460 volts three phase. How the nine wires are connected is dictated by which voltage listed above is going to be applied to the motor AND whether the connections will be configured as Delta or Wye (Star). The connections within the motor connection box are all made using wire nuts and approved electrical tape, NO terminal boards. Also, the connection box is informally referred to as a "peckerhead" which is just jargon used in the skilled trades.
How are 7,8, and 9 wired inside the motor. I am trying to visualize the inside of the motor. I understand 1 and 4 are 2 windings, 2 and 5 are 2 windings, and 3 and 6 are 2 windings making a total of 6 windings in the motor but when 7,8,9 wires are popping out of the motor I don’t understand how they are wired inside the motor.
Please put a video on working of computer's Switch Mode Power Supply
Fun fact: the electrical terminal box is sometimes called a peckerhead. Haha ic
square root can be interpreted as equal contribution to each other. multiplication means contibution of one dimension for each unit of another dimension. Equal contribution, or a joint.
❤❤
The Engineering Grindset
Very good explanation but you left the ending Hanging. You could end like this "Since the Star Connection uses less current thus Motor Connections should be in Star?" or "Since Delta connections produce higher voltage of 400 running of Motors is on Delta?" .. makes better sense?
Hello, I want you to make a video about Dynamo 100 kW 3 phase generator
Do you always need 2 sets of coils per phase across from each other (like in your video)? Or would it be possible to use only one coil per phase (so the current enters the coil in U1 and directly goes to U2 at the end of the coil)?
Then it will produce low torque
What happens when you have a motor wired for delta but have wye service? Is there a possibility of burning the motor?
Good luck
Do You mean by using less current and voltage for the star connection that will give us less voltage and current as output?
Star Delta Power!
If the star or delta connection is an option in any 3-phase motor, does this mean you can use either configuration in order to get higher or lower power output? This seems a bit odd to me, as I would have expected the motor design to be optimised for one or the other (but I am not an electrical engineer).
@@ciberiada01 Interesting. Since I posted that comment I saw another video about the star/delta switching systems that you mentioned. This apparently is intended to limit the huge inrush current that induction motors draw when initially powered (which will be lower with a star connection). Once it's up to speed it can be switched to delta for maximum power, without such a big current surge. Maybe that's the main reason for having the option available. I'm not sure I understand why a motor would be designed only for star connection though.
good sir, since star connection is less amps, so is it advisable to run the motor in star conncetion , and then why it is required to start motor in star and run in delta ?, please clear my doubts.
Good Sir......my request Indonesia subtitle....😁
Is there a prize for being the 1st commenter? Especially when you don't add any value or ask and question. Great video nonetheless!
It's always fun to be the 1st viewer or commenter on a video so I gave you a thumbs up...
Nice video. But please upload subtitle.
upload for motor rewinding
I wish this used US standard voltages and termination numbering as well.
How can to phases be connected together with out a short circuit thanks.