Can I just use the fci filter and prefilter without the intake tube. Maybe just omit the airbox or air box lid only? Thanks for all your great videos! I’m on a budget so my 2018 700r is stock except for your early on fan sensor which works great!
hello I wanted to know if you pass the sand with the paper filter or buy the foam if or if. or with the paper and the little black bag goes well thanks
Hey I got the ais block off plate and I removed the hose that runs through the air filter tube I plugged it with a cap I wanna get the fci do I have to run the hose again or can I just plug it with a cap?
I just did the big 3 on my 2006 Raptor 700, my FCI intake just came with the straight fitting on on the side. The way you routed the hoses seems a lot better than the way I have them routed now. Hoses want to kink up on me.
I have the fuel customs intake already I want to buy the Empire 54mm throttle body they sell them as a kit with a larger intake. My question is will my fuel customs work with the 54mm throttle body or should I just buy the complete kit with new larger intake ?
SF K which hose? if you are referring to the boot at the throttle body them I recommend cleaning the boot inside with alcohol and using some sandpaper to rough up the intake tube, clean it as well. do not over tighten the clamp
Thanks for video..💯🔥👍👍
Thank you so much for that information that's awesome
Can I just use the fci filter and prefilter without the intake tube. Maybe just omit the airbox or air box lid only? Thanks for all your great videos! I’m on a budget so my 2018 700r is stock except for your early on fan sensor which works great!
im getting two slow engine light blinks followed by two more blinks whats the issue with my yamaha can you help?
hello I wanted to know if you pass the sand with the paper filter or buy the foam if or if. or with the paper and the little black bag goes well thanks
Hey I got the ais block off plate and I removed the hose that runs through the air filter tube I plugged it with a cap I wanna get the fci do I have to run the hose again or can I just plug it with a cap?
What size Tap and what length bolts do you recommend for the bracket that holds the intake tube to the frame that you speak about in the video?
do a video on the regulator/commander👌any possibly review🔥good content
Regulator/Commander? Are you talking about the Power Commander V (PCV)?
If so, this is the install video. ruclips.net/video/MD_vBOfQuLY/видео.html
Would it be worth it to run this intake without any engine work!?
Can I install the fci intake kit without a tune.? With possibility a tune on the future?
Quick question I have a raptor 2020 and when I installed the same intake and when I rev it, it over revs do I need to tune it running a stock exhaust
Any idea what size hose the factory ais hose is? And what size cap did you use to cap the fresh air nipple
can i still use the big gun power box or i need the commander 5?
Did you drill holes in the intake tube in order to install fittings to reroute the crank case hose and high idle hose?
Nathan Myers the new FCI kits come drilled with Grommet and fittings
I just did the big 3 on my 2006 Raptor 700, my FCI intake just came with the straight fitting on on the side. The way you routed the hoses seems a lot better than the way I have them routed now. Hoses want to kink up on me.
I have the fuel customs intake already I want to buy the Empire 54mm throttle body they sell them as a kit with a larger intake. My question is will my fuel customs work with the 54mm throttle body or should I just buy the complete kit with new larger intake ?
54mm requires the larger intake. We have them available with modded inlets for better fitment with factory boot
💪🏻😎
Will this work for a 2008 raptor
Would you prefer the airbox for the intake or open ?
Airbox definitely
Why do you have to use the silicone and super glue?? Is it really that bad of a product? I'm hesitant to be glueing parts together on my 10k ATV lol
You dont. This is how we do it.
@@MrCuervoRacing Does it have issues on staying together?
If you do heavy mudding extra rtv doesn’t hurt stuff to keep water away
Do you clean the fci filters like k&n filters?
Yes exactly
Would you say this is more of a struggle to install then a 54mm tb set up?
I have an FCI on my raptor 700 2016 and the hose keeps coming lose and i keep tightening it and it keeps coming off , any solution?
SF K which hose? if you are referring to the boot at the throttle body them I recommend cleaning the boot inside with alcohol and using some sandpaper to rough up the intake tube, clean it as well. do not over tighten the clamp
alright thanks a lot :D
Is there any issues with this intake set up if you decide to go in some water on a trail?
Martin Marentes if water is a constant thing then I would option for the box version. Small puddles and crosses is not an issue
Bro before you said bullshit I was thinking you was ab to say bullshit
Levi Jones hahahha