Que buen trabajo. Aunque es de locos e irresponsables trabajar con electricidad en el piso con agua. Creo que pudo sacar mayor corriente con un generador de mayor calidad.
When you made the first Tesla turbine with metal plates, in the comments they told you that you needed the exhaust holes near the center. So you made another one with the exhaust holes in the center and got maximum rotation. Do you still have that video, I would like a copy of it. Your work on it was extremely good.
I thought you made one after this one, but you put some drain holes close to the center of the disc's. With the drain fitting on the side. I remembered the speed getting very high. It's alright, I remember how you did it, I was just being lazy. I want to make a larger model for an off-grid house in the mountains. Thank you for your help. You do some very good work.
A super super project you gave me some good ideas why not put a disc with a magnets embedded in it mmm and put some coils and make your own alternator or generator or whatever might be a lot more efficient than going through a long coupling and then to a generator that could actually be get wet and be bad period actually I'm just thinking about getting a bunch of CDs and putting on a long shaft because I have I have lots of water coming off a creek and I can just spray that in like and and use several hoses coming down and whatever comes down is going to spin it somewhat and keep it going without any cowlings or anything like that maybe spin one shooting from the bottom and one shooting up or something but it's a beautiful beautiful thing thank you
You construct and do things in a formal manner. Weldone Sir, your work is recognised, I like the way you spray the pipes blue it looks so formal. Blue pipes😁😁😁😁🤩🤩❤ Happy new year
Could you please tell me that which type of drill machines you have used to make holes and that particular shape (something like oval shape) in the CDs ??? I'm just confused in this thing ...
Would love to see another version done same turbine and generator only uaing gear reduction of some sort and compare it to the first far as power generation goes.
It would be nice to know what the RPM's are when you apply a load to the motor, it does seem to slow down quite a bit when you connect the fan or lights. Do you think you could increase the RPM's with gears, would that produce more wattage? I would love to see a video of that build. 🙂🙂
Amazing idea sir. Best innovation you've done. But sir I have suggestion. What if we put a single water output on your turbine then, on that single straight path 6inch in length and 2 inch in diameter pvc pipe and inside of it we put a many small jet like blades where the water passing through on it. Can you think you increase rpm and torque? Thank you sir more power to you.
Hello brother great work . But brother isn't there any other method to hold discs on shaft . U have used those 3 more bolts that's a nice idea for a tight assembly but brother these three bolts will gonna distrub the boundary layer effect. Please can u suggest me another idea.
@@mr.construction9846 yup but that needs machinery 🥲🤧and le me who is mechanical engineering student but our professor don't allows to work individually on their own projects. Only for the job assigned by sir 🤌🏻🥲 emotional damage
I see lots things that are happening but there no explanations on almost all the important things. What is come from the Black piping? Was there a magnet placed in with the CD’s. You didn't explain nearly enough of what you were doing. We can't read minds out here.
You can't just make some crap and call it a Tesla. You are not a car company. However good this turbine is, it is not a Tesla turbine. This is an impact turbine with some of the concepts of the Telsa turbine included.
@@mr.construction9846 Just to be clear. I love your work. Because of the 3 connecting rods that are keeping the CD-s in place this turbine became a hybrid between Telsa and Pelton turbine, where the rods act as shells of Pelton turbine.
Развлечения
Coming again friends, thank you for sharing a very creative video🙏👍
Thank you
Que buen trabajo. Aunque es de locos e irresponsables trabajar con electricidad en el piso con agua. Creo que pudo sacar mayor corriente con un generador de mayor calidad.
Jaja gracias 😂😂😂👍👍👍🌹🌹🌹
When you made the first Tesla turbine with metal plates, in the comments they told you that you needed the exhaust holes near the center. So you made another one with the exhaust holes in the center and got maximum rotation. Do you still have that video, I would like a copy of it. Your work on it was extremely good.
Are you talking about this video ruclips.net/video/LWV8Lfnr5rM/видео.html
I thought you made one after this one, but you put some drain holes close to the center of the disc's. With the drain fitting on the side. I remembered the speed getting very high. It's alright, I remember how you did it, I was just being lazy. I want to make a larger model for an off-grid house in the mountains. Thank you for your help. You do some very good work.
Tuh kan hasilnya kurang maximal jika lubang berada di tengah, voltase turun
A super super project you gave me some good ideas why not put a disc with a magnets embedded in it mmm and put some coils and make your own alternator or generator or whatever might be a lot more efficient than going through a long coupling and then to a generator that could actually be get wet and be bad period actually I'm just thinking about getting a bunch of CDs and putting on a long shaft because I have I have lots of water coming off a creek and I can just spray that in like and and use several hoses coming down and whatever comes down is going to spin it somewhat and keep it going without any cowlings or anything like that maybe spin one shooting from the bottom and one shooting up or something but it's a beautiful beautiful thing thank you
You construct and do things in a formal manner. Weldone Sir, your work is recognised, I like the way you spray the pipes blue it looks so formal. Blue pipes😁😁😁😁🤩🤩❤ Happy new year
Thank you 🌹🌹🌹
Excellent presentation really nice 👍
Thanks
Great videos! If you where to pick one as the “best“ microhydro setup what one (of the ones you've built) would it be?
I want to know this as well. Which version is the most efficient at producing power per unit of water flow?
@@wilmarkus3517 q1w3r5
@@wilmarkus3517 6
I'll make a bigger one when I find a suitable place to put it
Felicidades por los 100.000 suscriptores este 09 de febrero 2022.
Thank you 🌹🌹🌹🌹
Could you please tell me that which type of drill machines you have used to make holes and that particular shape (something like oval shape) in the CDs ???
I'm just confused in this thing ...
its name is "mold grinder"
Woow amazing turbin..
Good job
Thank you
Sir you are so great your ideas was fabulous
Thank you
Great videos amazing
Thanks
Would love to see another version done same turbine and generator only uaing gear reduction of some sort and compare it to the first far as power generation goes.
It would be nice to know what the RPM's are when you apply a load to the motor, it does seem to slow down quite a bit when you connect the fan or lights. Do you think you could increase the RPM's with gears, would that produce more wattage? I would love to see a video of that build. 🙂🙂
With a strong water source, adding gears will be more effective, otherwise it will have the opposite effect
Great! Do it works also with compressed air instead than water?
Beautiful
great job my friend congratulations 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷
Thank bro 👍👍👍
Mais uma vez parabéns incrível 👏👏
obrigada
Nice
It shows how efficient it is wow
👍👍👍👍👍
Bravo 👏👏
我非常喜歡這一集影片。。。can you try steam instead water ？
我也有一個steam的想法，但還沒有做
А попробуй зделать гэс но все система спрятаны внутри дамбы и построй рядом город и освети с помощью гэс.ок?
Это довольно трудоемкий проект
Is there a device that can limit the output of generator to 12volts
Amazing idea sir. Best innovation you've done. But sir I have suggestion. What if we put a single water output on your turbine then, on that single straight path 6inch in length and 2 inch in diameter pvc pipe and inside of it we put a many small jet like blades where the water passing through on it. Can you think you increase rpm and torque? Thank you sir more power to you.
I think with tesla turbine like this is optimal, it also simulates the same principle as a real turbine
Dear sir .. which generator used for that ...I want purchase that kindly share your ideas
It's the engine used in air conditioners, try looking for it
Woo power idea for this pump
Thanks
What material do you make the turbine casing out of?
I used formex sheet for the frame and reinforced it with fiberglass
Correct me of I'm wrong but, assuming my calculations are right, it would take 4 hours to produce 60 watts of energy?
You're right, but it's just a model, we can improve it
Where can I buy the small board next to the switch?
I bought it at a store next to my house, I'm not sure which online store sells it
How big motor is making pressure of water
how do you get more power? and in order to create a higher rpm using water? please help me sir, i want to create using generator from genset motor
Reduce friction, if possible, increase the gear ratio
I like your channel
Thanks you
What motor are you using?
Hello brother great work .
But brother isn't there any other method to hold discs on shaft .
U have used those 3 more bolts that's a nice idea for a tight assembly but brother these three bolts will gonna distrub the boundary layer effect.
Please can u suggest me another idea.
Let's make grooves on the shaft and disc
@@mr.construction9846 yup but that needs machinery 🥲🤧and le me who is mechanical engineering student but our professor don't allows to work individually on their own projects.
Only for the job assigned by sir 🤌🏻🥲 emotional damage
Great thanks
👍👍👍
Sir..i want know what is this motor(generator).?How can we find it.
it's an air conditioner motor, you can search for such information
I see lots things that are happening but there no explanations on almost all the important things. What is come from the Black piping? Was there a magnet placed in with the CD’s. You didn't explain nearly enough of what you were doing. We can't read minds out here.
The black tube is just a pedestal, its principle is the same as the Tesla turbine
فكرة جميلة لكن فيها اسراف في استخدام الماء
👍👍👍 Thanks
Sehr Interesant
Thank bro
Show! where can i get this type of generator?
It is the motor of the old air conditioner
Which motor is that
it's an air conditioner motor, you can search for such information
Name material of disk?
It's a CD, it was quite popular in the 2000s
How many liters per hour?
Maybe 500
@@mr.construction9846 nice 👍
can you not make a water pump from a water pipe 🙏🙏
😂😂😂👌👌👌
@@mr.construction9846 why are you laughing
You can't just make some crap and call it a Tesla. You are not a car company. However good this turbine is, it is not a Tesla turbine. This is an impact turbine with some of the concepts of the Telsa turbine included.
👍👍👍
@@mr.construction9846 Just to be clear. I love your work. Because of the 3 connecting rods that are keeping the CD-s in place this turbine became a hybrid between Telsa and Pelton turbine, where the rods act as shells of Pelton turbine.
Cool
very simple but still failed to explain anything, time wasted with a lack of communication. try speaking
Haha. Maybe wrong