Controlled chaos, broken parts, and no broken bones....GRIND HARD has evolved so much over the years....thanks for showing us the SPIRIT of Sturgis. 🎉 🏍
It's amazing what you can get away with in the States, here in Australia you'll be booked if your tyres are1mm outside the bodywork. The ADR's (Australian Design Rules" means the end of anything out of the stock "ordinary".
I'm not afraid to admit when I'm wrong and I'm totally wrong when I posted awhile back that there was no way I thought that motor could turn that wheel with that small of a rear sprocket. That thing is amazing. Could easily be the winner of the most unique vehicle of 2024. Well done Grind Hard Plumbing! You guys rock. Glad you guys had a good time.
that is what you get for not understanding basic physics. You made up something and had to be proven wrong. Not like this is the first time somebody has done this, either.
Rolling a grind hard machine is just an initiation ritual at this point. If you don't crash something, you're out. The "only 19 left on the road now" really got him. I would have felt the same way.
@@orangeracecar996 I mean, the silver lining about there only being 19 on the road are there are literal HUNDREDS in junkyards. So ya know, the parts aren't the issue.
I love Edwin's editing! He is so passionate about it and I think that is something that really levels up their channel compared to other automotive content creators.
the monster chopper is exactly what I would want to do if I ever made a bike. the rust, the absurdity, and the realization of the word fun. the artistic twist that got put into the rear axle spoke to the blacksmith part of me lol
The bounce of the bike a high speed is probably due to the wheels not being perfectly rounded since they removed part of the rubber. But I noticed that at the end of the video only the front tire was bouncing, meaning that the burnouts that they did with the rear tired rounded it, swapping the wheels and then doing a burnout to even it out will probably fix it for good
@@waynerohde1036 Burn out the other tyre and then get them balanced properly. Should make 90 then as long as the axle is up to it. You can also gear for speed if you want to. A wonderful beast.
I absolutely love how each point of failure on these builds are the small hurdles making the best platform for your creations. Seeing you fix them and better them is why this channel is so great.
I was thinking the same. It would be interesting first to see how concentric the OD of the tire is with the axle. That's a lot of tire and even if it is out a 1/4" it would be a significant amount of weight. True it up and then dump the beads in. If he brings the tire into balance as close as possible first it will only make it easier for the beads to work well and he would need less of them which should make it more stable over bumps.
I think the burnout also helped smooth the tires themselves. Swap the front and rear and do it again. I bet it could hit 100 without the bounce (in some undisclosed location in Mexico, of course)...
@@MagentaRV If it topped out at 70 on level ground, it will never make it to 100. Not even downhill. It runs out of gearing before it runs out of power.
Top 5 best channels on YT. The exhaust, front driving profile, lean angle when cornering just make this the baddest thing on two wheels in the US. Wow it looks so fun to ride!!!
@GrindHardPlumbingCo That was only 5 years ago, and you guys have grown exponentially. I'm sure Jay Lenos jaw would drop seeing the absolute machines you guys have built, and how far you've come since then. I'm loving every minute of it. Godspeed my brothers.
Awesome! Idea for getting air around tire to intake. Maybe some type of scoop connected above the lights on the side of the front wheel and connect to air intake with dryer duct tube, maybe 🤔😝
Only my second video from you guys. This looks so cool. You guys have so much fun. It breaks and pop you're right there able to fix it in minutes. So cool! To be with a group of free spirited, high-capable dudes; and, just make it happen. Thanks for sharing all of these! 😎😁
You know I usually think these kinds of comments are weird but this video really cheered me up. My grandmother died today and while we knew it'd be coming soon it still doesn't change the fact. I'd been feeling really bummed and just out of it today but this video showcases all of what life is about in a beautiful dumb amalgam of humanity. Crunching together a completely impractical motorcycle with 40in tires just to do it, getting together with some friends and just having a good time. Reminds me of what to look forward to and what really matters in life. Cheers everyone
This video has brightened up my day you guys. Truly your magnum opus. Seeing how much fun you and everybody else were having just makes me appreciate you so much more. Thanks for letting us into your life through these videos!
@12:07 You are "Chainless" AND "Shameless". It can be fixed. We loved it. I hope the custom swingarm...what am I talking about. That thing is "Bulletpr00f".
Put some bead bags inside of your tires on the monster chopper and the bouncing should go away.The bigger tires aren't balanced enough. Try the bead bags.👌👍🔥
This might be the best representation of Sturgis for an Outsider to see that I've ever seen. Great job guys! Can't wait to see the 2.5 version of the Monster Chopper.
You know what? The guy stopping at 4am to make sure you guys weren't thieves....... What a legend! That's community service right there. A person of the public who cares about local businesses so much that they are willing to confront potential danger. Whilst you guys were probably sound asleep, this dudes heart was probably racing contemplating what he was going to do if you were up to no good? The dude deserves at least my recognition anyway. Thanks random stranger for making less cynical of the world 💓
OK. I was having a shit day. Pissed off for hours thinking about really bad stuff. Super depressed. Then I saw the slow race and I laughed my ass off watching Ethan just sit there. Thanks guys. You really brightened my day and pulled me out of my funk.
I think some of the "armored" motorcycle gear would look really cool while riding the monster chopper. I hope we can expect to see some upgrades to the driveline in the future. The monster chopper deserves it.
Been waiting for this video for ages. I'm getting into and going to school for welding because of you guys! I usually watch on tv so I never comment but I had to comment on this one.
On God, a GHPC and CBoys is the ultimate RUclips match up. I didn't even realize how bad I wanted it, until I saw Evan driving the Monster Chopper. STURGIS BRINGS THE BEST OF EVERYONE, and I am 110% here for it! Let the content creation ROLL!
We've all been patiently waiting for this one. This is what RUclips was meant for! We could feel the fun you guys were having while watching this episode.
Hi guys! I’ve been working on a grind hard plumbing co kinda inspired triwheeler. I’ve been watching you since I was 9 years old and have always loved the pure chaos of your creations, and now I’m old enough to know how to build my own, I wish I could show it to you when it’s finished but I’m not sure how😅 love the vids guys.
This is my favorite GHPC vid ever, by a landslide. Just the amount of adrenaline you get when watching the sick shots of all the extreme shit happening around every corner. Ethan can RIDE. Would it be viable to put the tires in a big lathe and grind them more even? To minimize the hoppety hop?
there's other cooling issues. those ktm v twins trap air in the top of the cylinders even with the stock radiator height you need to use the air bleed screws and tip it up to like 20 degrees in the manual. and on yours the radiator is even lower.
I can't believe Evan from CBoys rode it and brought it back in one piece, broke but one piece. The long exposure shot at night was real cool also camera Steve, great video
Get your GHPC Sturgis shirt before they are all gone! www.grindhardplumbingco.com/
The silhouette of Ethans helmet, the front tire and his hands on the handlebars would make a killer full back cover on a hoodie
Ethan!!!!! Wear a jacket..... road rash is a REAL thing that does happen. Please.
@@GrindHardPlumbingCo i'm not saying the new merch is bad, i love it, but i still really like the simple ones
@@GrindHardPlumbingCo Your vision is unmatched 🤖
You guys were having way too much fun!
I feel like the monster chopper is Ethan personified. Of all the things he has built, it is the MOST Ethan thing and I love it.
and only he can ride it cause he is the only one that doesn't tip it😂😂😂
Its the most bad ass bike ive ever seen honestly. He did really good work to it.
the magnum opus
@@Arithrykauntil his next magnum opus.
I don't know how you could top the monster chopper but I'm sure Ethan can and will.
Ethans definitely in top 5 legendary automotive youtubers
Controlled chaos, broken parts, and no broken bones....GRIND HARD has evolved so much over the years....thanks for showing us the SPIRIT of Sturgis. 🎉 🏍
the way Ethan handled that monster around the barrel race was outstanding
that was impressive .... great job
My mind is blown how well it works. The whole thing is form over function yet somehow manages to function amazing anyway!
Big smile on my face
Agreed! I've done barrel racing on horse back and it's FAST..... But a Ethan did surprisingly way better than I thought 👍
It's amazing what you can get away with in the States, here in Australia you'll be booked if your tyres are1mm outside the bodywork. The ADR's (Australian Design Rules" means the end of anything out of the stock "ordinary".
This bike 100% needs to be in a video game. Borderlands comes to mind. But anything post-apocalyptic works.
It needs to be in the next Mad Max movie.
perfect for last day on earth
"Unregistered Homemade Contraption" sounds like a good idea for a shirt lol
Unregistered homemade contraptions are probably felonies in the state of California.
Came to say the same thing
And definitely would make a great bumper sticker😂
Shut up and enjoy the show ya goof!
hell yeah the the shirt and the bumper sticker. I need them
I'm a 70 yr old gearhead. Love seeing this kind of thing. you're great doing it. Keep it up.
Man, that solo needs a winter mode. Skies up front with some tracks out the back with that Hayabusa in it. 👌
👍👍to the Pacific Steel and Recycling yard in Rapid for taking that camper off your hands!
Man, please do whatever it takes to keep Padrick on the channel. The content is so much stronger with him on the team!
Preach!
YES! Patrick is so cool. I would love to see him in more videos in the future!
agreed
Rolling the busa solo just cemented that fact. Absolutely brilliant addition to the team 🙌
YUPP!
I love how in the "slowest wins" race, Ethan just sat still at the starting line. I lol'd so hard.
I'm not afraid to admit when I'm wrong and I'm totally wrong when I posted awhile back that there was no way I thought that motor could turn that wheel with that small of a rear sprocket. That thing is amazing. Could easily be the winner of the most unique vehicle of 2024. Well done Grind Hard Plumbing! You guys rock. Glad you guys had a good time.
Wow...First Person Ever Fo Admit They Were Wrong On The Inter Webs...You Win Today Sir🤠 Grind Hard, Thanks For Sharing!
that is what you get for not understanding basic physics. You made up something and had to be proven wrong. Not like this is the first time somebody has done this, either.
Na that thing still don’t turn
@@jf8138 Why so bitter lol
@@aurorapaisley7453 bitter af lol
-- *_Enjoyable composition, nicely edited. Thank you, Grind Hard Plumbing Co.!_*
Rolling a grind hard machine is just an initiation ritual at this point. If you don't crash something, you're out.
The "only 19 left on the road now" really got him. I would have felt the same way.
I feel like they should either build an exocage on the solo, or bring back the boys with the English wheels and roll some steel fenders
@@orangeracecar996 I mean, the silver lining about there only being 19 on the road are there are literal HUNDREDS in junkyards. So ya know, the parts aren't the issue.
That Monster Chopper is absolute ART in its purest form. Love it!
Editor killed it on this one never felt too long
Thanks man! It was a hard one to edit but glad how it turned out
I love Edwin's editing! He is so passionate about it and I think that is something that really levels up their channel compared to other automotive content creators.
@@GrindHardPlumbingCo was an awesome video major event a lot going on loved it
This is the exact comment I came here for.
…. Literally A1 editing Sir!🤌🏾
I was smiling through the whole video :)
the monster chopper is exactly what I would want to do if I ever made a bike. the rust, the absurdity, and the realization of the word fun. the artistic twist that got put into the rear axle spoke to the blacksmith part of me lol
The bounce of the bike a high speed is probably due to the wheels not being perfectly rounded since they removed part of the rubber. But I noticed that at the end of the video only the front tire was bouncing, meaning that the burnouts that they did with the rear tired rounded it, swapping the wheels and then doing a burnout to even it out will probably fix it for good
I agree. Needs a burnout on the other tire
@@waynerohde1036 Burn out the other tyre and then get them balanced properly. Should make 90 then as long as the axle is up to it. You can also gear for speed if you want to. A wonderful beast.
It's not just the wheels. The suspension is too soft to dampen vibrations.
He said that already in the video
I'm surprised Ethan didn't build some kind of super sketch tire lathe to turn them down all nice like.
I absolutely love how each point of failure on these builds are the small hurdles making the best platform for your creations. Seeing you fix them and better them is why this channel is so great.
Off-Road Balancing beads are amazing! Put a couple pounds of those in each tire and you can probably get rid of that hop above 55.
I run them in my jeep, and it is surprising how well they work.
I was thinking the same. It would be interesting first to see how concentric the OD of the tire is with the axle. That's a lot of tire and even if it is out a 1/4" it would be a significant amount of weight. True it up and then dump the beads in. If he brings the tire into balance as close as possible first it will only make it easier for the beads to work well and he would need less of them which should make it more stable over bumps.
They have been using thise beads in dump trucks and large unbalancing tires for years
I think the burnout also helped smooth the tires themselves. Swap the front and rear and do it again. I bet it could hit 100 without the bounce (in some undisclosed location in Mexico, of course)...
@@MagentaRV If it topped out at 70 on level ground, it will never make it to 100. Not even downhill. It runs out of gearing before it runs out of power.
Top 5 best channels on YT. The exhaust, front driving profile, lean angle when cornering just make this the baddest thing on two wheels in the US. Wow it looks so fun to ride!!!
Jay Leno is going to want to see the Monster Chopper.
That would be a nice full circle moment. We took the Barbie car to him when we first started
@GrindHardPlumbingCo
That was only 5 years ago, and you guys have grown exponentially. I'm sure Jay Lenos jaw would drop seeing the absolute machines you guys have built, and how far you've come since then. I'm loving every minute of it. Godspeed my brothers.
Awesome! Idea for getting air around tire to intake. Maybe some type of scoop connected above the lights on the side of the front wheel and connect to air intake with dryer duct tube, maybe 🤔😝
Only my second video from you guys. This looks so cool. You guys have so much fun. It breaks and pop you're right there able to fix it in minutes. So cool! To be with a group of free spirited, high-capable dudes; and, just make it happen. Thanks for sharing all of these! 😎😁
You know I usually think these kinds of comments are weird but this video really cheered me up. My grandmother died today and while we knew it'd be coming soon it still doesn't change the fact. I'd been feeling really bummed and just out of it today but this video showcases all of what life is about in a beautiful dumb amalgam of humanity. Crunching together a completely impractical motorcycle with 40in tires just to do it, getting together with some friends and just having a good time. Reminds me of what to look forward to and what really matters in life. Cheers everyone
Sorry for your loss man. Glad to provide laugh or two. Enjoy life in your grandma’s honor!
@@GrindHardPlumbingCo Much love y'all!
🙏❤
"Weird" comments are the best! ;)
I have been watching your videos for years and I think this trip to Sturgis was one of the best trips you guys could have looks like a blast
2:37 “if it was remotely legal…” proceeds to drive down the road 😂😂 love this about some of these rural areas of the US ❤
I got a bike with a registration sticker that reads 1995. Cops see it all the time, they don't mind
Yeah it's great when the cops decide they should chase you out of town for your politics or skin color
I live in Wyoming and have a MPV license plate on my 4 wheeler. I love freedom. "multi purpose vehicle."
Monster chopper one of the coolest bikes I have ever seen
Love it
I’d be completely fine with Ethan if he called himself the Batman from now on
"I am BATMAN....... WHERE ISN SHE!"
literally one of my favorite builds ive evre seen man. amazing.
Homie in the golf cart sounded hammered! 🤣
He was Kamala Harris drunk!
@@blurglide what the hell does that even mean?
@@christophersmith5996 Half the time, when Kamala Harris is speaking off-script, she sounds drunk
@@blurglide get your politics out of here homie no one wants them here
Now that's what I'm talking about!!!!! On The Roads👍👍👍👍👍👍
Devastated I could not make it this year, after editing this I see a Harley swapped Grom in my near future for Sturgis 2025!
Use and evo motor out of late 90s soft tail
Where's the cheap maverick overland build!
@@sagesends Still working on it
Harley powered off-road Go kart?
Make it a PanHead!
This video has brightened up my day you guys. Truly your magnum opus. Seeing how much fun you and everybody else were having just makes me appreciate you so much more. Thanks for letting us into your life through these videos!
Thanks Edwin for the hard work of getting this video out! Been patiently waiting for its release. Thanks again!
I'm almost crying, that's how beautiful this video is. You are all awesome!
Patrick, Patrick, Patrick you are definitely a part of the G.H.P.C. family!
@12:07 You are "Chainless" AND "Shameless". It can be fixed. We loved it.
I hope the custom swingarm...what am I talking about. That thing is "Bulletpr00f".
Put some bead bags inside of your tires on the monster chopper and the bouncing should go away.The bigger tires aren't balanced enough. Try the bead bags.👌👍🔥
I've been following this build for months. That thing should be in a Mad Max film. Badass, awesome boys !!!
This might be the best representation of Sturgis for an Outsider to see that I've ever seen. Great job guys! Can't wait to see the 2.5 version of the Monster Chopper.
Sick!! Tire is so close to the fender. When it balloons out from the rotational force it hits. Epic
The monster chopper needs aircraft tyres for highway use. And some side pods to giunse the air into the radiator. It looks so sick!
Well done taking the time and effort to clean up the trash!!
Possibly one of your best episodes ever. No real fabrication but such a solid episode!
That honestly looks terrifying. Little cart looks fun. I dig the shifter.
We gotta see more Grind Hard and Cboys!!!
I agree
Those are both some *INCREDIBLE* builds/machines!
How freakin' awesome!!!
I know dizzy stunts personally! I was stoked to see her in the video! I’ve rode with her in Vegas. She’s a badass
what a hell of an experience man, thanks for taking us with you, really felt like we got to see the event with yall
You know what? The guy stopping at 4am to make sure you guys weren't thieves....... What a legend! That's community service right there. A person of the public who cares about local businesses so much that they are willing to confront potential danger. Whilst you guys were probably sound asleep, this dudes heart was probably racing contemplating what he was going to do if you were up to no good?
The dude deserves at least my recognition anyway.
Thanks random stranger for making less cynical of the world 💓
What a good time! You guys are killing it and thanks for the hospitality 🎉
The guys saying “are you not entertained” is my favorite
How this video doesnt have over a million views already is beyond me! Killer video, killer footage, killer editing! Keeping doing GHPC things!
OK. I was having a shit day. Pissed off for hours thinking about really bad stuff. Super depressed. Then I saw the slow race and I laughed my ass off watching Ethan just sit there. Thanks guys. You really brightened my day and pulled me out of my funk.
Glad we could provide a laugh man! There’s always a bright side!
Thats My Friends!!! Im so glad y'all connected with @Della Crew Co. !!!!
I think some of the "armored" motorcycle gear would look really cool while riding the monster chopper.
I hope we can expect to see some upgrades to the driveline in the future. The monster chopper deserves it.
Something in the style of Mad Max!
@@MrJJandJim or a rusty set of medieval armor with spiked helmet and some fur on the shoulders, lol
Man, it was awesome to get to see these machines up close. Even better was getting to kick with y’all for a few days! Til next time, cheers! 🍻🤠
You deserve an award for the way you barrel race,
Been waiting for this video for ages. I'm getting into and going to school for welding because of you guys! I usually watch on tv so I never comment but I had to comment on this one.
That is awesome! Can’t wait to see what you create at welding school 🔥
Weld!
The world needs more welders.🤘🏼
The editing and music is always so on point. Great vibe.
I love that Grind Hard and Westin basically made the same machine for Sturgis! They are even both red!
I know! Such a bummer we missed him!
@@GrindHardPlumbingCo I'd love to see another colab between y'all and Westin!
The Solo is nuts. The Hayabusa swapped one even more so. But man, the chopper? Makes the swapped Solo look sane. Awesome!
Better than anything on TV, great vid!
It is nice to a guy that can fix anything with a welder and a grinder almost
Great to see Grind Hard at Sturgis. I love the headlight that illuminates the back of the tyre for you. Next year fly the plane there
Best camera man hands down i wish i had a friend like him.
The fact Ethan only cares about missing the shot of him rolling proves he's a real friend and a good guy
The monster chopper was probably the highlight of Sturgis
On God, a GHPC and CBoys is the ultimate RUclips match up. I didn't even realize how bad I wanted it, until I saw Evan driving the Monster Chopper. STURGIS BRINGS THE BEST OF EVERYONE, and I am 110% here for it! Let the content creation ROLL!
Cboys just need some better riders like Evan/Ethan and they’d be set 😂
That monster chopper is one of the coolest things I have seen.
For sure one of your top uploads yet!
Feels like just yesterday you were making a widebody kit for the 'Stang, so happy with how far this channel has come.
"are you as concerned as I am? nahhh, they got it." 🤣🤙
My respect honestly 💯 great works 💪 greatness out there 🙌
Got to meet Ethan one day out of random shenanigans. Glad got to see the monster chopper in its glory.
That was incredible, thanks for the show.
I can not believe how well Ethan can ride that thing conversely how good it handles.
We've all been patiently waiting for this one. This is what RUclips was meant for! We could feel the fun you guys were having while watching this episode.
Monster Chopper go wiggle-wiggle but don't fold...🤣🤣🤣
Very cool looking JANUS bike at 8:51. The rest of Sturgis is crazy. Experienced it twice and that was enough.
12:28 that diabolical reverse was hilarious 😂😂
he was soo drunk
So impractical, but so awesome watching this build. This is true American ingenuity...Keep Crushing and Innovating!
Patrick worth his weight in gold to GHPC. Announce that man is officially here forever!!!
Thank you so much for taking time out of your fun week to pick up some large trash from our beautiful Black Hills!
DUDE EVAN BRO!!!
Gotta love the CBoys!
Hi guys! I’ve been working on a grind hard plumbing co kinda inspired triwheeler. I’ve been watching you since I was 9 years old and have always loved the pure chaos of your creations, and now I’m old enough to know how to build my own, I wish I could show it to you when it’s finished but I’m not sure how😅 love the vids guys.
Looks like the Dark Knight Batman bike, with the rider hunched down between these two giant, beefy wheels, and basically horizontal forks.
Monster Chopper Even the front end appearance out and solve cooling issues by making an intake cowl for the side w/o lights. So dope though.
Finally an event you can take part in without completely stealing the show!! Looks like a lot of fun!!
You young guy are having to much fun i am 71 years old and I love your videos keep up the good work
0:38 look at those heckin good puppers
This is my favorite GHPC vid ever, by a landslide. Just the amount of adrenaline you get when watching the sick shots of all the extreme shit happening around every corner. Ethan can RIDE.
Would it be viable to put the tires in a big lathe and grind them more even? To minimize the hoppety hop?
Of COURSE! As @wizz1358 pointed out, swap front and rear tire and have another night of burnouts. The monster chopper IS the lathe. 🤯
You gotta love these hopelessly optimistic headlights pointing into the wheel.
Fantastic, classic Grind Hard content. Love it
there's other cooling issues. those ktm v twins trap air in the top of the cylinders even with the stock radiator height you need to use the air bleed screws and tip it up to like 20 degrees in the manual. and on yours the radiator is even lower.
i like that the headlights only light up the back of the wheel
"hole on, I wannnna tay a pish-ure." -Drunk guy at Sturgis '24🍻🍻🍻
I can't believe Evan from CBoys rode it and brought it back in one piece, broke but one piece. The long exposure shot at night was real cool also camera Steve, great video
Edwin needs to build a creation for next year.
😂😢
Oh I will!
Electric Hyabusa
That guy? NEVER 😂😂
Places you can't even walk, at Sturgis. ❤
I love seeing dizzy stunts that was AWSOIME