Enjoy watching these build videos and seeing the transformation from start to finish. Video suggestion a V6 budget build. Alot more affordable and achievable for viewers who want to try revive older cars.
Ran into Jake at the servo earlier this week. Didn't know me from a bar of soap, and even with my social retardedness, still gave me the time of day and had a yarn. What a stand up bloke!!!
Great to see there is still stocko VNs out there. Couple of detailing tips for you. Don’t fuck around using brushes retail bottles of cleaner. Start off the interior from the top down, spray 10:1 water based degreaser on roofline and wipe clean with an old chamois. Work down to your dash, consol areas spray , wipe and use your air blow gun to get into vents, nooks and crannies etc. With your doorjambs, just spray the lot including door cards with degreaser and wash it off with your pressure washer, leave the doors open to dry. Wipe any rubber seal marks with prepsol and if you have a white car with red dust that remains, spray your doorjambs with acid based mag wheel cleaner. Rust marks such as you have on the paint and engine bay as well as any red dust hiding behind body gaskets, badges etc, spray it all with acid based wheel cleaner and wash off with pressure cleaner. This will strip the polish off the car and will need a buff. Those clay pads are bloody good gear and for those that do t have an orbital you can get a hand applicator and do it by hand. These are also good for removing overspray. One last thing. Stop using fcking microfibres and throwing them out. Wash them out and reuse them and shitting jobs should just be old fucked worn out rags. They are too expensive for o r time use. You might laugh, but when these came out, they were &30 each, so we were drummed with fear of sodomy they were not to be used for anything other than polish.
@25:20 Old Detailers trick, Prior to any paint prep & after a gerenal wash. Do a degreaser wash (something like CT-14) mix to suit , follow it up with an Acid wash (Store bought stuff these days isn't the same thing, you must be approved to use it) Class 3 Hydrofluric Acid (very limited time to work with, mix to suit application) Wash again with normal car wash (Stabilizes the Ph levels) Then Clay bar, then Cut & polish as required (many methods available) This works really well for cars of that vintage, some newer & many older. Enjoying this, cheers & hope it helps.
I run a cheap orbital sander with no paper on Low speed on the carpet when I’m vacuuming and it pulls up 3x the amount of shit you can’t see out the carpets before I shampoo them it’s a game changer
Hey mate, just discovered your channel! Great channel, well done! If you do more commodores I know a quick, cheap and effective repair on the map pocket elastic on the back of the seats.
Mate ya have good work, Just there's some things that leave me scratching my head, A few bits of paper thrown around would of stopped that over spray😢 Also VNs are Acrylic wiping it with thinners is going to soften it, Mate I like watching your vids! I've been in a wheelchair for 3 years but I was a painter for 30 so I like to watch builds, Have a look at The Back Shed he knows how to detail a snot box older fella can give you a few tips.
Dude, leave the cat on and get a single 3 inch cat back system, doesn't matter what brand.. Lukey has one, it will sound tuff as f*k.. and if you want it stupid loud put a straight pipe out the ass..
Get some colours for you and Louis polish I don’t do inside the windows of us it’s got 10 fucking up get some cutters and do the windows for you she’s gonna be
Enjoy watching these build videos and seeing the transformation from start to finish. Video suggestion a V6 budget build. Alot more affordable and achievable for viewers who want to try revive older cars.
Ran into Jake at the servo earlier this week. Didn't know me from a bar of soap, and even with my social retardedness, still gave me the time of day and had a yarn. What a stand up bloke!!!
You don’t put vids up very often but always worth the wait! Love the care free slap together builds that turn out killa👌🏻
Please keep making videos brother, you by far are the best bloke to watch ! Absolutely love your videos - keep them up yewwww
Cutting springs via squintology
This is why I watch 👌
Love your work and passion mate.
That N looks killer massive reward from a good clean up .
Finally a real Holden engine on the channel :P
Love it Jake!
You high-five me after the burn out in summernats after you jumped on the car 😂😂 loved it
Great to see there is still stocko VNs out there. Couple of detailing tips for you. Don’t fuck around using brushes retail bottles of cleaner. Start off the interior from the top down, spray 10:1 water based degreaser on roofline and wipe clean with an old chamois. Work down to your dash, consol areas spray , wipe and use your air blow gun to get into vents, nooks and crannies etc. With your doorjambs, just spray the lot including door cards with degreaser and wash it off with your pressure washer, leave the doors open to dry. Wipe any rubber seal marks with prepsol and if you have a white car with red dust that remains, spray your doorjambs with acid based mag wheel cleaner. Rust marks such as you have on the paint and engine bay as well as any red dust hiding behind body gaskets, badges etc, spray it all with acid based wheel cleaner and wash off with pressure cleaner. This will strip the polish off the car and will need a buff. Those clay pads are bloody good gear and for those that do t have an orbital you can get a hand applicator and do it by hand. These are also good for removing overspray. One last thing.
Stop using fcking microfibres and throwing them out. Wash them out and reuse them and shitting jobs should just be old fucked worn out rags. They are too expensive for o r time use. You might laugh, but when these came out, they were &30 each, so we were drummed with fear of sodomy they were not to be used for anything other than polish.
Fuck we need more episodes with Sam. Maybe even run us through his cars and a few of the other boys garage’s 👌
Great work Jake.
Was nice to meet you at summernats too. I’ll see you there next year and I’ll show you my car.
Adrian.
Love these older wagons. Big windows super comfy.
Great to see you bring a VN back from almost dead. I'm sure I saw and videoed you at the Summernats. I did try to video every VN. Great job
Well done Jake and Friends the vn looks killer, enjoy summernats. 👍
That thing turned out killa mate love ur work
Never late in a 308, or a 304 in this case 🔥
Shut the gate, it's an Aussie V8
Legend ! Always does a great job of bringing cars back to life love it ! Inspired me to start doing mine lol
Tuff build, bro! Love the content.
Love the content jake 🤙
We need a FOCUSE YA C#&T tshirt from the chop shop👍👍
All fkn day👌
Awesome job guys!! Looks great
Fuck yess brings back the old days playing with these vl turbo and big 5.0 cars yesss
Bro I've been waiting for VN build, my all time favorite Commodore. Love what you've done to it so want it. And HQ build was on man 🔥 Churr
Nice one bruz, definitely going to try the orbital clay pad on a few of my own projects looks like it works a treat 👌🏼
Looks bloody mint! Time to drop some Gaz merch
@25:20 Old Detailers trick, Prior to any paint prep & after a gerenal wash. Do a degreaser wash (something like CT-14) mix to suit , follow it up with an Acid wash (Store bought stuff these days isn't the same thing, you must be approved to use it) Class 3 Hydrofluric Acid (very limited time to work with, mix to suit application) Wash again with normal car wash (Stabilizes the Ph levels) Then Clay bar, then Cut & polish as required (many methods available) This works really well for cars of that vintage, some newer & many older. Enjoying this, cheers & hope it helps.
Awesome stuff, we want a vn burnout💪
Vid was will worth the wait like always looks killa mate
Love the episode VN looks killa 12,000 views but only 9.6 subs who’s watching but not subscribing 🤯
I run a cheap orbital sander with no paper on Low speed on the carpet when I’m vacuuming and it pulls up 3x the amount of shit you can’t see out the carpets before I shampoo them it’s a game changer
Killer job bro keep ‘em coming
The zero fks given skid this delivered was top tier..... 😂💪🤙
Wicked video. ....everyone could do with a mate like Gaz.
I’m hoping part 2 is uploading right this minute
You would not think that is the same car at all. Amazing job as ususal
Im a ford man but love the vn👍👍
Fugging edging us with the Monaro in the background!😮
Good stuff Jake I've met Garry a few times seems like a good bloke and knows his shit and hes got soe tuff toys too
I love Gary 😂
Nice video of an old clunker , all I could think of when you pulled out the orbital was ya polishing a turd hahaha 😆
Ripper job 👍
Garry what an legend
Jake did you have to get the vn tuned to run the high rise or did it run that well with the stock ecu
Hey mate, just discovered your channel! Great channel, well done!
If you do more commodores I know a quick, cheap and effective repair on the map pocket elastic on the back of the seats.
Cutting springs doesn't kill the suspension? Thinking of doing to my VN
How did the fabric softner deal work mate ?? Just wondering for myself as getting a vn wags thinking that maybe a Goer to revitalise the trim a bit
Loving the content brother taking a shitter or something that needs some love and bringing it back.
Awsome vids man keep em coming.anychance of the part numbers for intake setup ? Cheers
Love ya work bruv
Smashing the youtube content
308 the world🤘💪
That’s what I do here’s clothing soap and baby soccer makes the pet wear is soft and the seat soft
call video happy New Year. Love The love it love it love it love it
Hey Jake, do you wana sell the old grille out of it?
Try using a hair dryer on the rear tint and a squeezey
What a Wild Card.....Red HOT 🔥
Gary’s a fkn magician bruv we all need a mate like Gary. Post up my LS3 Carby White VN Berlina tomoz
Looks great, needs a better exhaust
Nice bro. Ive gota get a wet vac. Clean utes great on a monday feel ready. Cheers
Mate ya have good work, Just there's some things that leave me scratching my head, A few bits of paper thrown around would of stopped that over spray😢 Also VNs are Acrylic wiping it with thinners is going to soften it, Mate I like watching your vids! I've been in a wheelchair for 3 years but I was a painter for 30 so I like to watch builds, Have a look at The Back Shed he knows how to detail a snot box older fella can give you a few tips.
Wish I had outlaw in my town I'm 10 minutes from summernats in canberra
awesome
far out man Im supposed to not go to bed at or after midnight for a change tonight
Lol I saw Yu on the ABC news 😂
What??! Link
@@worldwidehiphop. I find it
ruclips.net/video/b9DYMMevx2Y/видео.htmlsi=ox19KmCDwyjdH7uX
what a beast
another coil off the rear won’t hurt 🤣
Good shit turned out decent 👌
Go Boys!
cool
Hell Yeah🤘🤘🤘
Fuck I need a Gary.
Jake, have you seen this? You loose unit! 🤣
Vl in the norty corner is it 😅
what happenes after they rip your sticker off at summernats? just no more driving this year? do ya get banned next year or anything?
Dude, leave the cat on and get a single 3 inch cat back system, doesn't matter what brand.. Lukey has one, it will sound tuff as f*k.. and if you want it stupid loud put a straight pipe out the ass..
Nah not for me
Get some colours for you and Louis polish I don’t do inside the windows of us it’s got 10 fucking up get some cutters and do the windows for you she’s gonna be
Dude did the basics and calls it a build 🤡
Let’s see your ‘builds’ 🤡
Yet here you are taking the time to watch and comment 🤷🏻♂️ he must be doing something rite hey?🥜😂
@@tylonboyd473 ruclips.net/video/RmW6KtNM40k/видео.htmlfeature=shared
It's the basics that takes the car to the next level not a rebuild just a clean up look at the difference different car