Gyeon wet coat - Why are you applying it wrong?
HTML-код
- Опубликовано: 25 авг 2024
- Today we’re looking at Gyeon Wet Coat and a couple off label applications. Which one is best?
Read the thread over on detailing world!
www.detailingw...
Big thanks to www.bensound.com for providing the music.
I always apply these types of products on wet surface, but spread it with a microfiber wash towel before rinsing it all off. I’ve always had great results doing it that way versus spray and rinse.
Same here. I only used an applicator in the video becuase I needed to do a dry section, and have good control of where I applied it so I wouldn’t get any on the other panels. Meguiars done with a wet panel and a microfibre towel is really easy and quick.
Can I wash and reuse the microfiber towel if I use this method or do I have to throw it away?
@@iamspankyfpv1468 I wash and reuse
Very interesting video I will apply doing the same thing ❤
I'm glad I'm not the only one that likes it the dry way👌
It was actually quite nice, all this considered. Now, it’s not as easy as some other spray on wipe off products, and it’s durability long term is still unknown.
I spray to the roof of the wet car about 4 squirts. Then, power spray the top of the car and work down with the sprayer. I next squirt each wheel with 1 squirt each, then power rinse the wheels. I use a large plush, soft microfiber towel to dry the car.
I used this first time. I used both methods depending on where I was putting it: I sprayed small section and then softly spread it with a clothe. Also sprayed on the clothe and then spread from there. Happy with the results.. shiny and slippery surface.
Living in a tropical country where rainy season lasts 6 months in a year, what I normally do is coat my vehicles with a base layer of Sonax bsd. I Let it cure after a few days and then after my first wash thats when I use Wet Coat as a topper using spray, spread the product and then power rinse it off right away. Helps in the maintainence washes throughout the rainy season! Cheers!
I’m surprised you would cover up BSD water behaviour with wet coat. Sonax Polymer net shield is a better match with BSD, and BSD works on wet paint from what I understand.
Interesting. I think tec 582 works better as a spray and rise. Not sure on durability obviously but found this interesting. Great videos as always!
I changed my sprayer and have the tolco sprayers on these and have them set to spread as wide as possible and with a pressure washer all I need is one spray on each panel maybe 2 and I get amazing results
Thanks for this interesting video👍. I apply on dry panel the Meguiar's spray céramique(the blue one) and also better results. (durability and look).
Have a good day
Salutations Franck from France 🙏
Thank u so much for this video
Great vid, just one comment really, I would buy this product for its ease of use applying it as intended. If I wanted to do a normal sealant wipe on buff off type I would buy one of those sealants. Were this comes into effect for me is when I want to give the wheels sort sort of protection
Agreed, they are easy to use. I would have a look at wet coat essence over this, I found it performs better and you can dilute it to various levels depend on the strength you want.
I mean.. if you're going to apply it on a dry panel you might as well just use a product that is suppose to be applied that way (like Gyeon Cure for example). The beauty of wetcoat is the ease of application. I myself use it as a topper for my rims or when I cant wash my car by hand and I don't want to swirl the paint.
I’m not advocating for dry use, I’m advocating against spray and rinse. Spray, wipe, and rinse performs basically as well as dry and uses less product than spray and rinse.
@@sheepstardetail you did spray it in a stream setting. Least effective way, would've done much better spraying on the proper nozzle setting
@@mcham0846 that trigger doesn’t have a stream setting just normal. It just doesn’t come out that well. In another video where I compared it to wet coat essence it used even more product and fully covered a panel, performed poorly there to.
@A. Melbs he clearly sprayed on stream, so the properties didn't spread out evenly. I've been using this product for years. When applied properly, it works well.
@A. Melbs why would I make things up?
What effect does this product have on the floor tiles?
Nothing. Never had an issue with a spray on rinse off product in the floors.
Cool! I like the variations and demonstrations. I do like the hand applied method for the even coverage but here is my thoughts. Apply a regular sealant of choice for even coverage. Then use the spray and rinse as the topper for that sealant. However, in my scenario u would have to buy 2 products where as your demonstration shows the one product for coverage and topping. Nicely done.
Yeah. I know these are not long term products, and they are designed to be as fast as possible to apply, but it takes a lot of product. When meguiars hybrid ceramic wax came out with the spray and spread for base and then spray and rinse, it got me thinking. So far spray and spread performs better or the same as spray and rinse, while using less product.
@@sheepstardetail yessir!
@@sheepstardetail)
THANK YOU!
My first experience with Wet Coat using the recommended spray it on a wet car and then spray off gave very disappointing results like your third panel. I was looking to toss it and find something else - Maybe BlAck Ice..I’m so glad you made this video. I’ll finish out the Wet Coat and may move over to Black Ice later.
Your welcome man! If it’s available, megs hybrid ceramic wax is worth a look too!
Great video. Is a pressure hose required for the rinse or can one use a regular garden hose in the jet/high pressure setting ?
I don’t believe it’s required, but it may take longer to rinse off the residue that remains if you don’t use a pressure washer. Definitely need a sharp stream of water though.
Really nice results.
Thank you!
I had a issue with spotting and streaking,followed directions,out of sun ,applied after rinse.then rinsed off with a no spot DI water rinse.should have done a drying towel wipe down.i needed to back with D3fy to get rid of the mess.applied to much? Unknown.not thrilled.maybe a higher pressure final rinse would have been more effective?
I would just spray it on a wet panel, spread with a wet Microfiber, and then rinse the remainder off. It has never steered me wrong and uses less product as well.
@@sheepstardetail i,ll try that next time.
Thanks for this. How often do you reapply and do you find you need less product when topping up?
I haven’t used it as a regular top up product before. I know in other videos I showed it would last anywhere from 1-2 months, depending on the time of year and how frequently you wash. Not sure if you would use less if you apply it with the spray on, wipe in, rinse off method. It’s already stretching the product as far as it can really go.
@@sheepstardetail thanks for the reply 👍
I really want to buy some of this, I’ve been looking at it for a while. Can it be applied over soft99 Fusso coat ?
I’m not sure, double check Gyeon’s website and see if they list any comparability issues.
Great video and demonstration. To be honest never thought about dry application. The only concern l have is the amount of wipe off required on such a small panel. Not sure that would be a good idea on soft paint IMO.
In practice it’s not quite as much wiping, I was just being thorough. Either way those, wet with a wipe in is the best way to use it.
Wiping a panel is irrelevant providing it has no contamination. You're over thinking it
Hey buddy reckon you are oversimplifying it! That's a big assumption that there is no contamination. We are talking detailing here are we not.? All l said was my only concern which l think is valid. Anyway only my opinion. ;)
Thank you for the in depth look at Wetcoat. I would like to add that for me the differences aren't this big. When applying Wetcoat as a spray and rinse off application I have a sprayer set to mist not stream. That could greatly affect how the product gets distributed across the panel. In my experience spraying a wet panel and then gently wiping with a towel works best and seems to have slightly better hydrophobics than dry/spray&rinse methods.
It was on the mist setting in the video, I think it just didn’t get a proper pull of product. Personally I don’t think dry or wet makes a difference, but it does need to be spread, otherwise you’re going to compensate with more product.
@@sheepstardetailnah it was on stream setting, not mist
@@juliangrigoriciuc you’re going to tell me how the bottle was setup, that I was holding?
@@sheepstardetail Yes, since you can clearly see it on video, it’s on stream. The spray nozzle has 4 options - OFF, Mist, OFF, Stream. You were using the stream setting by the looks of it. I enjoyed the video, great comparison between each application method, but I don’t appreciate people who can’t just admit that they are wrong.
@@juliangrigoriciucI will take a video of this tonight, trust me, it’s not on stream, it’s just not working correctly. Look for a short to follow.
Thank you, thank you, thank you!!!
This was exacly I want to know what the best and most effectly way is to use 2QM Wet Coat!!
I only see videos they use Wet Coat on wet surfaces. Rinse, spray, rins...
Actually to use Wet Coat on a dry surface en whipe it off with a towl was also my tought to have the best results. This video confirms my thoughts, THANKS AGAIN!
No worries mate!
I take the dry aply.
Great review SheepStar. If you wash your car often, is there really a need to use anything else other than one of the spray/rinse sealants? Just so easy and when rinsing after a wash you can apply it then dry with air. I never used one of these spray rinse sealants long term. Gyeon told me that Wet Coat is really meant to be a topper. I'm on the fence as to whether I want to just use Wet Coat as my sole protection due to ease of use.
Technically no, you can use what ever protectant you want as long as you pay attention to its endurance. Some people don’t like rinse aids as they can leave a film or make glass streaky/blotchy. If it works for you though then more power to you. RUclips’s detailing community and review system in general is in a weird place right now. There is a lot of new products coming out, and getting reviews and info out there is useful for consumers. On the other hand, it’s causing a massive grass is greener effect for people that would otherwise be totally content with what they have. I like trying stuff out, it’s why I started this thing. It’s also why I have shelves of bottles that I probably won’t use again unless I’m detailing a car that belongs to someone I hate.
@@sheepstardetail Well said. I completely agree.
Great video. Which one is better, Gyeon Wet Coat or Gyeon Ceramic Detailer? :)
They’re a bit different! Wet coat is definitely a wet application product - and by that I mean the car should be wet. The detailer is a dry application product, so very different work flows. Ultimately what you’re doing will determine what you’ll use. If you need to clean off light dust and don’t want to wash the car, the detailer is the on to use. During the winter or colder months wet coat really comes into its own as you don’t need to worry about removal and streaking.
I've used both but Ceramic Detailer is my go to. I apply it every 6 weeks. Wet Coat is really good on glass. I'll prefer WC in between CD applications.
on this topic, I’m using Wet Coat (wet application, spray-off) followed by Ceramic Detailer after drying. Much of an overkill? 😂
My questions is ....Why did you use a applicator on the wet dry off method.......Most people would spray it on then just dry if off.
Probably to help flatten the product and get full coverage
I wanted to ensure even coverage. It might not be necessary but if I was using a spray wax designed as wipe on wipe off, I would still apply it with an applicator to get even coverage and a thinner distribution.
I understans the point but, if I was into a dry application I'd use Cure instead. Thats why wetcoat is for. Spray and rinse off.
Yep, but spray and rinse doesn’t work as well, last as well, and wastes product. Wet application with spreading is the best compromise for performance, product usage, and application coverage.
On that dry application what's the longevity and durability on it? Does it last for 3 months at least?
Great video 👍
I’m not sure, I never test it out long term. I guess that’s an idea for a future video!
hi, the first time on a dry sponge is dry or wet?
The applicator was dry.
@@sheepstardetail thank sir
You using the same applicator?
Yes, sorry had to think back for that one.
I have always did the dry method where did you get that foam applicator at
It’s just a generic applicator sold at various detail supply sites. This style is usually sold by Lake Country.
I am pretty sure Gyeon says not to apply Wet Coat on a dry panel!
Yep! Mostly due to its thickness/concentration. You can use it dry and with success but you need to adjust your approach and technique. What I was trying to show here is that spray and rinse has the worst performance and wastes the most product. All you need to do is spray, wipe, and rinse and you’ll be doing great and still using minimal product.
@@sheepstardetail I found it so much better to apply it on a damp applicator with one spray line. It spreads easier and buffing off is a breeze.👌
Hi, love your channel. Can i use wet coat as a topper on Gyeon Cancoat? As a maintaining product? Thanks
Yep, should work well for that. I wouldn’t do it too often but they are designed to work with one another.
I only use it for rims
Question, do I have to throw away the applicator because it gets coated sprayed with the wet coat? What if I do method two which was to spray it on a wet panel and then use an applicator to spread it. If I do that will I have to throw the foam applicator away?
Nope! WetCoat doesn’t harden, just wash it out like you would a normal microfibre and you’ll be good to go!
Try it in a foam lance. Great results.
Wet coat? Straight or mixed down with water?
@@sheepstardetail
Yes Wet Coat. Straight. The water running through the lance dilutes it. I give the adjuster knob on my foam lance a half turn towards - so that it gets a bit more wet. That way it pulls 100 ml of product in about 15 seconds.
I do it the following way.
Set the foam nozzle to about 60 degrees fan angle. Start from the roof and apply half the roof and then one side of the car in three quick passes. Should not take you more than 5-6 seconds. Do it so that it also gets on half the bonnet and rear deck, you get the idea. Keep your45 degree nozzle close. I usually keep it in my pocket. As soon as you have put wet coat on one side, switch to your 45 degree nozzle and rinse off the wet coat. Go to the other side and wet down the car. Put your foam lance with wet coat back on and repeat. Note that the wet coat will foam a bit. This is a non-issue though. If your washer is adjustable, drop the pressure to 1500 psi. You are not trying to make foam.
The easiest way to find where the adjustment knob of your foamer should be, is to put 100 ml of water in it and dial it down until it takes 15 seconds to pull those 100 ml.
An added bonus is that while it gets on your windows, it does so completely uniformly. When you have rinsed off the wet coat on the seconds side and are done, start by drying the glass with a waffle towel, then dry the rest of the car as you normally would.
Here’s another tip for applying wet coat that ensures that it is not overused and wasted. Mix 75 ml of wet coat and 75ml o in a sprayer bottle. I just use one of my old empty 16 oz bottles and it’s spray head. Use it like you do when applying the coating on a wet panel where you spread it out with a wet applicator and then rinsee off with the washer like you did in the video. This allows you to be more liberal with how much you use, and as you mentioned yourself, wet coat spreads very well. I suspect that one could even dilute it more and get up to 20 cars per litre of wet coat. I have not tried it though.
Really interesting video this I think I may have just wasted waaayyy to much product in the past.
Do you know what the difference in durability is with the three methods ?
I don’t as of yet no. Something I plan to test out eventually, but I feel chemical resistance is going to be fairly poor with all 3 simply because these are designed as toppers/maintainers.
I’m willing to be dry lasts the longest, just based on what you see here.
@@sheepstardetail That’s a good point them being primarily used as a topper. Look forward to a future video then, thanks 👍🏻
@@sheepstardetail any update for protection after 2 month?
@@Microjuf car had to go to a body shop due to accident, so no results for long term performance unfortunately.
@@sheepstardetail sorry, are you ok?
I'll stick to the instructions as for me it's just alot quicker, plus this will be just a topper on top of my waxed car 👍🏻
Fair enough! If you find application to be inconsistent try spreading with a wet MF before rinsing, should even it out and not add much more time (and saves product too).
Interesting to see this on a black panel.....
To check gloss levels or streaking?
@@sheepstardetail both. Streaking and how much elbow grease to buff it back
Honestly, it’s really not bad used dry. Better than some products that as supposed to be used dry.
I tested this as well a while back. Dry application than rinse off. It uses the water to activate. In your rinse of the dry application, it didn't bead up immediately. It was waiting for water to activate it.
It did, just not fully. The spray and rinse section on the other hand, didn’t bead at all. I’m saying to use this in a wet application, just not spray and rinse.
But in the first panel of the three, was the cloth wet or dry?
First section was a dry application. The idea was to show how each application performs.
I would close the door.
I find it interesting you open the car door then spray water why?
To stop the product from mixing between the doors and panels.
It's common sense.
Gyeon essence works better for dry application
You mean cure? Essence is a Carpro polish/AIO. And yes, the point is to show that spray on rinse off is not a great way to apply a product, even if it was designed for that application.
@@sheepstardetail yes I meant cure. Sorry. Cure offers a nice shine but I find it difficult to apply without streaks.
@@89vette1 dilute it. 1:1 demineralized water bro
Waste of time if you’re going to do it that way you use Gyeon Cure.
Takes more time to dry a car off to apply cure than using this method of application for wetcoat
@sheepstardetail I agree. I know you're reviewing Wet Coat but if I had to apply and wipe down, I'd rather use Gyeon Ceramic Detailer. I get about 5-7 weeks of coverage.
@@CTTH100 that’s another good option, where I live Meguairs HCD is a better value, but I find Gyeon CD slicker. If I’m doing a quick maintenance wash with a top up, a wet coat type product is what I’ll reach for, if I’m spending any time with a polisher or applying a dry only LSP then a spray detailing/booster is what I’ll use, depending on the other products used of course.
@@sheepstardetail I agree...Gyeon is not price friendly. I like their stuff because it seems a bit more forgiving than some other products.