I started using the 20" in my Killer Instinct Bone Collector 370 last season and I killed a huge ten point buck. Hit him like a mallet! Im sold....I will be using these as long as they make them. Excellent bolts.
I'm looking at making my first crossbow purchase for this year's upcoming deer season. Among other articles and review videos, I've also just about settled on the Whitetail STR, and these same arrows showed up on a review article for Best Crossbow Bolts for the Money. Appreciate what you've got going on here, especially with regards to "entry" level crossbow hunting. Liked and Subscribed.
I ordered these and have the same crossbow. Because they punch so hard I had to get a different target that could handle it because I knocked fletching loose on three arrows. However, it didn’t hurt the fletchings so all I had to do was glue them back on. Great bolts for sure. The target I ordered was a morrell yellow jacket rated for 425 fps. Hopefully it’ll work well.
Great bolts. Shoot with a 2 blade ,125 grain Rage, at 20 inch length. I’ve put 2, large body mature bucks with my PSE crossbow. I got mine wrapped and lumenock’s added. One dropped in under 10 yards from direct engine room pass through. They other buck piled up approx 35 yards on a double lung pass through. No complaints whatsoever. Recommend them they pack some serious Kinetic Energy/knockdown.
Ryan, thanks for the input man, that’s some good stuff. Yea these have plenty of energy and I have had similar results with deer only making a short distance. Thanks again!
They are good bolts I've used them last season here in new zealand and got my 1st stag our stag roar season has just ended these bolts cost 15 each over here lol good video m8
Great video! I’m new to Xbow and am looking at the Barnett Whitetail Hunter STR. I’m wondering what target tips you are using (weight and diameter) and what is the best target block for an Xbow. Thanks! Keep the Xbow videos coming!
Thanks JD yea the STR is a great xbow and performs like bows that cost way more, I’m very happy with mine. The field points that I use are just cheap Allen brand ones from Walmart, they are 100gr. I’m not sure the diameter maybe like 1/4 in. The target I use I found on clearance at Walmart for $22 I think normally it’s like $60 or more but I would suggest something a little better. It barely stops the bolts now and it is brand new. But any block or bag style crossbow target should work, just keep in mind you get what you pay for. Glad you like the vids man!
Can I suggest stuffing a decent size box tight with old clothes and wrapping with duct tape? I couldn’t find anything to stop my bolts that didn’t cost a lot! I saw a guy on YT doing that and it works great. They won’t go through. You’ll have to change the box from time to time but it’s worth it. Happy hunting!
@@donjaun1423Dude yes i found this out on accident, didnt have a target so i grabbed an old backpack and some wet clothes that were laying in a pile in my barn, best target ever, just put a fresh layer of duct tape on the front each time.
Mike, awesome it’s good to hear others like them too. I’ve thought about getting the sniper to do a review on, it’s a great deal and the bow shoots very good. Thanks for checking out the vid man!
Will be so sad if these arrow fly better or as good as my 15-16.00 arrow. Been looking for budget arrows to stop spending 50-60 for just 3 bolts/arrows..
Mike, that’s pretty cool, these seem to be a popular combination of bolts and bow. As for the broad heads I will hopefully roll out a video next week, in the meanwhile I am going to try the shwaker expandables this year in 100 gr. I shot Muzzy 125gr 4 blades last year and they worked great. Just thought I would give expandables a try.
hi great info ;question;wath is the diferance from the 20`` and 22`` they look long on your crossbow ,the point of impact is it diferant one from the other ,if use on a 405 fts is the 22 better or i keep the 20 with 125 gr in the front ,thank you ,merci à vous .
Victor, so with crossbows you can always shoot a longer bolt than manufacturer recommendation but not shorter. My crossbow recommends 22” so I wouldn’t be able to shoot the 20”. As far as choosing one over the other I would go with what the bow is manufactured for, the shorter bolt may be faster, but a longer bolt may have more energy and may stabilize in flight a little better. I hope this helps!
I ordered them from Amazon they were only like $12, but they are for a compound bow, so I modified them to fit. Please see this video, it will tell you all about it.ruclips.net/video/H2_83Ruxhlk/видео.html. Thanks for checking out the channel man.
Oh yea, it’s almost that time, I’m just trying to help everyone else try to get geared up lol. I’m trying to alternate videos between fishing and hunting to mix things up.
Save your money at .004 run out there are far better options .I would suggest Black Eagle Executioners with .001 run out (tir)and 110 Gr brass inserts upfront. To shoot your best ,shoot the best!
I like the way you continue to cover every aspect of the individual parts of the crossbow and all the different components. 😊
Btw the weight is with a 100 grain head on it so just subtract 100 from whatever it says on the box or arrow
I agree just got mine in weighed them and 356 with out tip
I like the way you continue to cover every aspect of the individual parts of the crossbow and all the different components.
I started using the 20" in my Killer Instinct Bone Collector 370 last season and I killed a huge ten point buck. Hit him like a mallet! Im sold....I will be using these as long as they make them. Excellent bolts.
The nock with the deep grove is what is used with scorpyd crossbows and that other goes with a ten point crossbow
I'm looking at making my first crossbow purchase for this year's upcoming deer season. Among other articles and review videos, I've also just about settled on the Whitetail STR, and these same arrows showed up on a review article for Best Crossbow Bolts for the Money. Appreciate what you've got going on here, especially with regards to "entry" level crossbow hunting. Liked and Subscribed.
I ordered these and have the same crossbow. Because they punch so hard I had to get a different target that could handle it because I knocked fletching loose on three arrows. However, it didn’t hurt the fletchings so all I had to do was glue them back on. Great bolts for sure. The target I ordered was a morrell yellow jacket rated for 425 fps. Hopefully it’ll work well.
Same bolts I use on my center point. Really enjoying the videos!
Carbon express shows weight 20" at 442 gr thats with 100 gr tip
Great bolts. Shoot with a 2 blade ,125 grain Rage, at 20 inch length. I’ve put 2, large body mature bucks with my PSE crossbow. I got mine wrapped and lumenock’s added. One dropped in under 10 yards from direct engine room pass through. They other buck piled up approx 35 yards on a double lung pass through. No complaints whatsoever. Recommend them they pack some serious Kinetic Energy/knockdown.
Ryan, thanks for the input man, that’s some good stuff. Yea these have plenty of energy and I have had similar results with deer only making a short distance. Thanks again!
Hey what size do your lumenoks fit and might you know what kind of lumenoks?
What is the foc with 125 gr broadhead with stock moon knock ?
Use the 20inch in my TenPoint Titan with no problems. They hit hard.
They are good bolts I've used them last season here in new zealand and got my 1st stag our stag roar season has just ended these bolts cost 15 each over here lol good video m8
Keep the faith my brother..
Great video! I’m new to Xbow and am looking at the Barnett Whitetail Hunter STR. I’m wondering what target tips you are using (weight and diameter) and what is the best target block for an Xbow. Thanks! Keep the Xbow videos coming!
Thanks JD yea the STR is a great xbow and performs like bows that cost way more, I’m very happy with mine.
The field points that I use are just cheap Allen brand ones from Walmart, they are 100gr. I’m not sure the diameter maybe like 1/4 in. The target I use I found on clearance at Walmart for $22 I think normally it’s like $60 or more but I would suggest something a little better. It barely stops the bolts now and it is brand new. But any block or bag style crossbow target should work, just keep in mind you get what you pay for. Glad you like the vids man!
Can I suggest stuffing a decent size box tight with old clothes and wrapping with duct tape? I couldn’t find anything to stop my bolts that didn’t cost a lot! I saw a guy on YT doing that and it works great. They won’t go through. You’ll have to change the box from time to time but it’s worth it. Happy hunting!
@@donjaun1423Dude yes i found this out on accident, didnt have a target so i grabbed an old backpack and some wet clothes that were laying in a pile in my barn, best target ever, just put a fresh layer of duct tape on the front each time.
If you like these, check out the Black Eagle Zombieslayers. My 2 favorite bolts for crossbows.
I have the 20 in one's.... I like em , im shooting centerpoint Mercenary and sniper....
Mike, awesome it’s good to hear others like them too. I’ve thought about getting the sniper to do a review on, it’s a great deal and the bow shoots very good. Thanks for checking out the vid man!
Will be so sad if these arrow fly better or as good as my 15-16.00 arrow. Been looking for budget arrows to stop spending 50-60 for just 3 bolts/arrows..
Are the 20" carbon Xpress bolts around 125grains including the broadhead? if so my crossbow (centerpoint 425 heat) can withstand them quite well.
Thanks for the info. I will pic up a pack of them. Be kind friends.
Great info bro, keep it up!
Gonna buy a set now thanks for the info
I hope they serve you well!
Excellent job
Any had any problems with the knocks breaking off on the shot with the pile driver ?
Ok; based on your video; got same crossbow and bolts;; now waiting on review of what broadheads you use for hunting.
Mike, that’s pretty cool, these seem to be a popular combination of bolts and bow. As for the broad heads I will hopefully roll out a video next week, in the meanwhile I am going to try the shwaker expandables this year in 100 gr. I shot Muzzy 125gr 4 blades last year and they worked great. Just thought I would give expandables a try.
I use same setup with the Swacker
I use the 20” Piledriver with a 125 grain Swhacker, love it.
I really like these
What’s FOC with 125 grain broadhead & stock moon knock ????????
just got 22 in sweet
Keep your fingers out of the dangerous triangle for safety
i bought the 6 pk 20 in gain are not the same
hi great info ;question;wath is the diferance from the 20`` and 22`` they look long on your crossbow ,the point of impact is it diferant one from the other ,if use on a 405 fts is the 22 better or i keep the 20 with 125 gr in the front ,thank you ,merci à vous .
Victor, so with crossbows you can always shoot a longer bolt than manufacturer recommendation but not shorter. My crossbow recommends 22” so I wouldn’t be able to shoot the 20”. As far as choosing one over the other I would go with what the bow is manufactured for, the shorter bolt may be faster, but a longer bolt may have more energy and may stabilize in flight a little better. I hope this helps!
Where did you get your dampeners? Do you like them?
I ordered them from Amazon they were only like $12, but they are for a compound bow, so I modified them to fit. Please see this video, it will tell you all about it.ruclips.net/video/H2_83Ruxhlk/видео.html. Thanks for checking out the channel man.
Man you’re gearing up for bow season lol!
Oh yea, it’s almost that time, I’m just trying to help everyone else try to get geared up lol. I’m trying to alternate videos between fishing and hunting to mix things up.
@@bluecollaroutdoors5556 more content is never a bad thing! Keep up the good content!
Save your money at .004 run out there are far better options .I would suggest Black Eagle Executioners with .001 run out (tir)and 110 Gr brass inserts upfront. To shoot your best ,shoot the best!
350gn not 442 without tip
Wrong
I show u on scale that it saying 346.5 gn that 20 bolt
Greetings from Russia. Cool video! I have these bolts they really nicely done. Subscribe and like.
I like the way you continue to cover every aspect of the individual parts of the crossbow and all the different components.