Crank but No Start Checklist Jaguar XK8 GV31 / XKR (X100)
HTML-код
- Опубликовано: 31 июл 2024
- A run through the 'XK8 Bible' Crank, no start checklist. If your Jaguar XK8/XKR is cranking but failing to start this is a series of checks to perform in order to find the issue. Thankfully I have never had this issue and I am only going through the checklist in theory. If you have any other suggestions please do not hesitate to add them in the comment section. Video GV31.
Please check the relevant fuse diagram for your model years as there are sutle changes.
Thanks to Gary VanRemortel for compiling the 'XK8 Bible'.
The bible can be found at www.tothegarage.co.uk
Here is the link www.tothegarage.co.uk/services-1
Channel = / odrmodurol
Please 'like' if you like the video by pressing the thumbs up, this is much appreciated.
Part of a series of short videos on the experience with maintaining our owns
1996 Jaguar XK8 4.0 V8 Petrol, 2014 Diesel SUV and 2013 Nissan Leaf 80Kw Electric car.
This is not an official guide and is for general information and interest only.
We Current have lots of useful playlists on the O&DR Jaguar XK8 Channel for these cars.
You can also find us on:-
Facebook - / damian.richmond.1
Instagram - / oanddr_modurol 
Авто/Мото
Thank you 🙌 I drove my 2002 XK8 50 miles. I was driving it for about two weeks straight (after it sitting for awhile) I was buying a new daily went to a dealership and made a funny comment saying …my jaguar is going to get jealous)
.” I go out and it doesn’t start it kind of sputters and dies…sputters and dies. I Wait three hours for a tow home, let it sit for a week, I go to start it and it just cranks… went through your steps. I think it was the inertia switch reset that did it. thank you so much. This video series is a godsend. 10:51
Rob, glad the video helped. These Jaguar can easily get jealous and throw little tantrums. Nothing you can't handle together with the support of the X100 community. Lots of help out there. Thanks for sharing your experience, regards Damian
Thanks for all your tips. I hope that my car will start in 1. march. After 4 months of hibernation. ; )
Udo, me too on 1st April. fingers crossed🤞. Thanks for the comment regards Damian
Brilliant video
Andreas, thanks you for the compliment. Brilliant list from Gary, regards Damian
Thanks Damien.
Dave, no problem. Lots of good information in the XK8 bible. Thanks for the compliment regards Damian
Super cool! Thanks
Alexander, thanks for the support, regards Damian
@@ODRModurol 1997xk8
Hi, do you know if after I manually reset the inertia switch I have to clear any (potentially) stored codes? I am asking because I don't have access to a scan tool. Thank you.
CarStart, no reseting the inertia switch should not require the clearing of any codes. Hope that helps regards Damian
@@ODRModurol ,thank you so much for your fast response, helps a lot!
CarStart, no problem good luck, regards Damian
How does one crack the security on X100 4,2L SC engine ECU to start engine please?
Glenn, not sure to be honest. Think it’s a dealer software job to recode the car to keys etc. unless someone has some software of their own. There are transponders in the keys and a transponder ring around the lock barrel. The ring has to see the key to allow the car to start. Sorry can’t be more helpful, regards Damian
I have problems with my 1999 xk8 with acceleration and maf sensors or trolley sensor where can I buy them
Carlitos, need to confirm part numbers first. Take a look at this video for how to find them, link below, regards Damian
ruclips.net/video/e7QzXEnnPwk/видео.html
The crankshaft sensor not so easy to get out... any removal tips? Install tips?
Mr Everything, Once the retaining bolt is removed it will be being held inside the location hole with corrosion. Try adding lubricant and gently twisting. Good luck, regards Damian
This video might help. Locking the timing (cams and flywheel) EP10 Jaguar XK8 / XKR (X100)
ruclips.net/video/2HnZkCQ80rY/видео.html
Can u please elaborate on the inertia switch. When I pressed it, it pressed down with a click. I tried to put the key in, then turned it to position 2 for a couple seconds but didn’t fix my issue. I thought maybe I did it wrong and tried again but when I pushed the inertia switch again, it depressed but without a click. I tried holding it down for a few seconds while going thru the steps with the key.. still didn’t fix it. The car worked just fine one day and then crank but no start the next day.
heathersgreeneyes, I believe the inertia switch only clicks once to reset. It then needs to be triggered before being reset again, that's the assumption anyway. If it hasn't fixed the issue probably best to look at the next item on the list. Sorry I cant be more helpful. Hope you get the car started, regards Damian
Do you by chance know the reset procedure for the car is after you have reset the inertia switch?
Here’s the video on the hard reset, hope that helps, regards Damian Jaguar XK8 Battery hard reset - Two different procedures S24 / XKR (X100) #shorts
ruclips.net/video/BChs4Nx95k0/видео.html
@@heathersgreeneyes how did you end up fixing this? it happened to me after disconnecting the battery for a while working on a window actuator
@@h7pubg my issue ended up being a sort of domino issue. One thing caused another and another sort of thing. What issue are you having specifically?
my 2000 xkr suddenly went into limp mode then completely shut down it would crank over but wouldn't start, thanks to your video i managed to to find that the 10 amp fuse was blown near the ECM module i replaced it the car started and ran for about 10 seconds and blew the fuse again any ideas it was running perfectly before this any ideas
Mikeyboy68, sorry haven't had any direct experience of the ECM fuse blowing. Might be a short in the wiring somewhere or a problem with the ECM itself. These can be repaired and are easier that fitting a new one as needs to be linked to the car etc. Sorry, I can't be more helpful, regards Damian
@@ODRModurol Thank you i am hoping its just a short it was running perfectly then suddenly went into limp mode and then stopped
@Mikeyboy88, hope it’s something simple. Please let us know what the issue was when you get it resolved. Good luck, regards Damian
Tengo problemas con mi xk8 1999 con sensores de aceleración y maf o sensor de trole donde puedo comprarlos
Carlitos, Primero debe confirmar los números de pieza. Echa un vistazo a este vídeo para saber cómo encontrarlos, enlace a continuación, saludos Damian
ruclips.net/video/e7QzXEnnPwk/видео.html
Putting the key in the ignition and turning II disables imboliser
Andy, Apologies, you are quite correct, door lock disables the alarm and ignition the immobiliser. Thanks for the correction, regards Damian
could be a wet connector to the ecu too?????????
Airman Bear, Could be but why is water getting anywhere near the ECU. Are the windscreen/scuttle drains blocked or not in position. regards Damian
Airman Bear, thought you might have blocked drains so made this video with your concern in mind. ruclips.net/video/XULNJqmfmvQ/видео.html. Thanks for the idea and hope you get your car sorted out, regards Damian
ILL TRY A HAIR DRYER ON THE ECM FIRST ?
Airman Bear, the ECM is supposed to be in a fully sealed box but anything’s worth a try. If you find the problem please let us know, regards Damian
WHERE IS THE ECM //? IT WILL NOT START ON WET RAINY DAYS
Airman Bear, the ECM is under front scuttle and plastic cover near the bulk head. If RHD is in the LHS and if LHD it’s in the RHS. Pull off the cover and it should be there next to a small fuse next. Hope that helps. Thanks for the comment regards Damian
@@ODRModurol IS IT EFFECTED BY MOISTURE LIKE SOME BRIT CARS?????????
Airman Bear, not normally effective by moisture. Do you have an vent bonnet eg XKR because if so water can fall out the engine. Spark plug cover seals can fail and allow water in. Hope that helps, regards Damian
Just find the notched corner of the fuse box and F1 is adjacent.
Gary, thanks for the input and 'top tip' much appreciate your support, regards Damian
1997jagu
Emra, thanks for the message. If you have any questions please ask, regards Damian
@@ODRModurol you text me Edward my God is in my God knows new started Jake Paul one 1997 xk 8