How to Replace Driveshaft Support Bearing 2005-2010 Chrysler 300

Buy Now!
New Driveshaft Center Support Bearing from 1AAuto.com 1aau.to/ib/1ADS...
This video shows you how to install a driveshaft center support bearing on your 2005-2010 Chrysler 300.
This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300
Tools you will need:
• Pry Bar 1aau.to/oMc/1AX...
• 10mm Wrench 1aau.to/oQa/1AX...
• 18mm Wrench
• 12mm Socket 1aau.to/obdh/1A...
• 13mm Socket 1aau.to/obdh/1A...
• 14mm Socket 1aau.to/obdh/1A...
• 18mm Socket 1aau.to/o7R/1AX...
• Bearing Separator
• Pliers
• T55 Torx Socket
• 1/2 Inch Ratchet 1aau.to/o7R/1AX...
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oboS/1A...
• Socket Extensions 1aau.to/obdh/1A...
• Swivel
• Torque Wrench 1aau.to/oas2/1A...
• Anti-Seize Grease
• Bearing Grease
• Bungee Cord
• Liquid Thread Locker
• Marker / Writing Utensil
• Rust Penetrant
• Hammer 1aau.to/oPn/1AX...
• Pole Jack
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@millionairebeachbum5388]

Would it be reasonable if I removed the exhaust first?

[@adamchestnut6485]

Man you helped a lot this the only car I found like mine with the exhaust, imma be doing it with the bare minimum lol

[@Htowndaz]

Great vid

[@carldehoney8633]

You said mark both ends. What if you're putting a different transmission back in ?

[@marcelosanchez3179]

Center drive shaft baring Chrysler 300

[@temesbust3420]

Good man 🦸‍♂️ very good especificlly

[@PsychoDiyBoom]

I cant separate my drive shaft as easy as you did. Any recommendation to get it apart.

[@sr8shoota]

how do you put it in nutral when the car is off?