damn, that looks super clean. nice bro. i was going to do the front lip but looking at the side skirts, might do that too. it gives such an awesome look to the car.
This look clean ash, sense all v6 and 2.0 trims plus lt1 got the same front end it actually look good if you get the front lip and side skirts honestly even if you got the v6 or 2.0 honestly invest and get the SS hood
I've tried finding a place like this close to where I live where I could go and use a lift, sadly can't find anywhere like that Makes that job of that soooooo much easier
I own a 2019 1LT and tbh I’m not a fan of the front end there are times where I do like it but it’s the best looking I’ve been considering buying the RS/SS headlights to hopefully make it look better but it is pricey 😬
Looks great brother. Congratulations. I love it. OE springs? You look lowered? Also - is that the NPP exhaust or did you go another way in the aftermarket? Blessings - JE
When do you actually remove the film to apply the 3m tape? Did you sick it on the Camaro first then screw it in or did you screw it in then remove the red film to apply the tape?
What’s up bro . Is this the( primer black) or the carbon flash ( painted metallic black) finish for the splitter . Want to know because I have a SS looking to buy this splitter.
So just as long as u position the Jack on the thinnest part of the side skirt I don’t think it’ll be a problem. Because the only issue would be getting the side skirt over the Jack and the bolt up the side that isn’t covered by the Jack then move the jack
Just got my own LT1 so happy to see videos out here like this! Thank you! Happy thanksgiving!
damn, that looks super clean. nice bro. i was going to do the front lip but looking at the side skirts, might do that too. it gives such an awesome look to the car.
Thanks! Yea definitely go for it!
Makes the car look awesome!
Very nice. I’ve been on the fence about getting these until now
Go for it!
This look clean ash, sense all v6 and 2.0 trims plus lt1 got the same front end it actually look good if you get the front lip and side skirts honestly even if you got the v6 or 2.0 honestly invest and get the SS hood
Nicest LT1 I've seen, have fun with it :-)
Thank you!
I've tried finding a place like this close to where I live where I could go and use a lift, sadly can't find anywhere like that Makes that job of that soooooo much easier
The wind deflectors do go back on. It's designed for them to sit on top of
But what about using pop rivets for the side skirts? Heard that's needed?
What springs do u have installed ?
I own a 2019 1LT and tbh I’m not a fan of the front end there are times where I do like it but it’s the best looking I’ve been considering buying the RS/SS headlights to hopefully make it look better but it is pricey 😬
Yea I wouldn’t it’s too much and I don’t think it’s worth it
Great job on the video brother !! Make me wanna buy a Camaró !! 👍🏽👍🏽
Thanks bro! I’ll sell you mine 😉
nice i got a shock lt1 21 im about to add side and lip i already added a diffuser and spoiler -wicker bell and louvers the car looks amazing
So the front air deflectors do not go back? Can they still be installed,informative video.
Looks great brother. Congratulations. I love it. OE springs? You look lowered? Also - is that the NPP exhaust or did you go another way in the aftermarket? Blessings - JE
Great video, looking to dress up my LT1 a bit as well. Where did you find that LT1 badge for the back of the car?
Looks sick. Just bought Rapid Blue yesterday want to do this
I don’t see how you don’t like the front end look more cooler than the past gen
Nice video. Nice car.
Thank you!
Does it need to be fastened by the sides too or is just bolting the bottom enough?
The lt1 look so much more cooler then the SS. With this kit tho it makes it even better.
Yup and newer too
Pass me whatever u smoking
@@PrinceNorth dkn but the ss just looks like it's trying to hard to look aggressive. This just looks aggressive without trying to.
What tires do you have? I really like the treads.
By the way, beautiful car!!!
Hey man, I just got this splitter for my 2019 Camaro RS. Are the rivets and drilling necessary? Like will it fall off if I don’t do that step?
I got the same questions what did you end up doing ?
Regarding the sideskirts, is the tape strong enough to hold the sideskirts even after a year?
If you're referring to the 3M tape that came on the skirt, yes it is. But it's being helped by the bolts themselves
When do you actually remove the film to apply the 3m tape? Did you sick it on the Camaro first then screw it in or did you screw it in then remove the red film to apply the tape?
Which exact kit did you buy? They have a few options
I am getting ready to order from Extreme online but wanna ask is the front spoiler gloss black or carbon flash painted.? Great video Thanks
This video just made me want to keep my 2022 LT1. I was thinking about trading it in but maybe I just need some parts. Which spoiler is that?
Factory GM carbon flash spoiler
When you put the double sided tape is it a one time thing that you have to line up or would it just get messed up.
It’s a one time thing
The website says carbon flash metallic, is it metallic or gloss?
What’s up bro . Is this the( primer black) or the carbon flash ( painted metallic black) finish for the splitter . Want to know because I have a SS looking to buy this splitter.
Where did you get the fender hash sticker
Can you send me the link to buy it, thanks
tried installing my today but I had a small gap for the skirts what do you recommend to fix the gap?
Gap where?
@@100aventador just along the whole side basically it doesn’t sit flush with the car
@@ryan9496 Try inserting more screws here the gap is, that align with the holes the side skirt comes with.
What rims do you have on your car
Nice
Question can you just use screws instead of rivets?
You can just make sure you’re using self tapping screens cause I don’t think the plastic body can keep regular screws in place since there’s no treads
what is the size of the rims and tires??
Where you get them rims from ?
Looks nice but all them holes under the skirt looks bad.. Ouch. Thats what i dont want to happen so im thinking bout just taking mine to a pro...
Lol you should, but considering I didn’t car about something that wasn’t gonna be seen, I was fine by it
Lol are you crawling under the 3" clearance to see a few black screws?
Where is the new car man? You have been talking about upgrading for a year what happened?
I did, lol I had a 4 cylinder and got a V8
Great job Carlos! What size are your tires and rims?
They were 275/35 R20 up front and 305/30 R20 in the rear. Wheels I think they were 20x10 front and 20x11 rear
@@100aventador Thanks for the info. Carlos. Your’s is by far the nicest LT1 I’ve seen so far.
looking good help me do mine lol
Where did you get the front side fender stickers from??
Got them from Chevrolet Accessories
Why use Rivets on front splitter ?
Extra insurance that it doesn’t fall off when you flooring the car lol
How long did you wait until you washed it again with the new installs?
The next day lol once they’re on they aren’t coming off. But if you use a wet method to install them, best let it sit without washing for 24-48 hoursb
@@100aventador okay, got ya. I have been putting off installing mine, I don't have a jack, that is the issue I have.
I actually like the lt1 front better than the ss
Thanks!
Did your package come with rivets?
Came with screws and the rivers I got myself
will this fit a LT1 ?
This is literally a lt1 in the video
damn i wish you didnt have to drill holes, was trying to avoid that
Has anyone done this without a lift and can confirm it doesn't take 8 hours lol. I am considering this but am worried it will be a disaster on jacks
it shouldn’t really be an issue, try to have someone else do it with you
So just as long as u position the Jack on the thinnest part of the side skirt I don’t think it’ll be a problem. Because the only issue would be getting the side skirt over the Jack and the bolt up the side that isn’t covered by the Jack then move the jack
Bumper looks weird
The music is very sus
You’re very sus