Just bought my dream 03 celica but with 210k miles 😬 I know I want to rebuild the engine & I never done anything like that before, actually I’m still learning when it comes to cars but thanks for your videos 🙂 I will deff use them for reference as well!
By my calculation, a full 2ZZ swap including a C66 euro trans would run you about $5500 assuming you buy new parts and pay a shop the labor and sell the old 5 speed and engine for approx $600 each. Add $500-1000 for a C60 trans with LSD.
I'm in South Dakota and just got a Wrecked Spyder that I plan on doing a 2AR build & making a track car with it. On top of that I'll be making a 2ZZ road race exhaust system for a friend soon
Hell yea brother. Mine isnt running atm cause oil pump messed up ( common 2zz prob🙄) but after i replace it and get it running in the mr2 i plan on turboing it. Hoping i can find some cheaper 9:1 pistons for higher boost. Alsp, still have the engine?
Hey man where you at?? I'm getting my 2zz replaced right now and was hoping to run into you at a meet so you can tell me how you went about tubroing it. As thats my next step haha
Hi !! I like your car! I have a 2000 MR2 spyder and I will like to swap my engine to 2zz but I don’t know nobody that know about that engine and the swap!! Here they only know about v8!! And I live in a apartment and don’t have a garage! That’s why I want a house with a garage! I would’ve like to be your neighbor or friend so you could be there to help me since you have experience!!
Love the vids man you got a new sub. Where'd you find your rods/pistons? My spyder fell victim to the pre cat failure, so going for a built 2zz and then turboing it down the road.
Patrick Wiseman I went to monkeywrench racing for basically 95 percent of my parts. they are a bit expensive. but worth every penny. mahle Pistons and stock rods (forged from factory)
John G. I blew up my built 2zz. The boost line for the wastegate broke off sending the boost to like 23 psi. The new 2zz I have I have some extra safeties for it.
C&R Garage how much time and labor is involved with swapping a 2003 matrix xrs. With a 2001 mr2. I want the 2zz from my matrix but don't really want to build it more than stock. I also have the ecu from an 01 Celica gts.
it depends on a lot of things lol, if you have all the pieces which included: exhaust, intake, motor mount, oil dipstick, vvl connector and ecu (2000) than around 1000
Get a honder
Just did, reveal soon, stay subbed!
@Francis Rogelio I went to the site and ended up being sex trafficked. Would not recommend it.
yes Toyota fan that doesn't like k swaps!! Thank you for staying toyota
2zz for the win!
Dude for real. Keep it in the family
Just bought my dream 03 celica but with 210k miles 😬
I know I want to rebuild the engine & I never done anything like that before, actually I’m still learning when it comes to cars but thanks for your videos 🙂
I will deff use them for reference as well!
I sold my celica when it had 219k miles and it still ran like new
If is 2zzge in good situation can handle over 300k easily with good maintenance
By my calculation, a full 2ZZ swap including a C66 euro trans would run you about $5500 assuming you buy new parts and pay a shop the labor and sell the old 5 speed and engine for approx $600 each. Add $500-1000 for a C60 trans with LSD.
I'm in South Dakota and just got a Wrecked Spyder that I plan on doing a 2AR build & making a track car with it. On top of that I'll be making a 2ZZ road race exhaust system for a friend soon
Sick edit bro! Cant wait to boost my Celica \m/
The Most Ariel can’t wait to see that!
Hell yea brother. Mine isnt running atm cause oil pump messed up ( common 2zz prob🙄) but after i replace it and get it running in the mr2 i plan on turboing it. Hoping i can find some cheaper 9:1 pistons for higher boost.
Alsp, still have the engine?
How much for the 2zz?
I have a Toyota celica GT-S I want to install turbo kit .... How much is the cost.. can you do for me ... Let me know how much ?
Hey man where you at?? I'm getting my 2zz replaced right now and was hoping to run into you at a meet so you can tell me how you went about tubroing it. As thats my next step haha
Hi !! I like your car! I have a 2000 MR2 spyder and I will like to swap my engine to 2zz but I don’t know nobody that know about that engine and the swap!! Here they only know about v8!! And I live in a apartment and don’t have a garage! That’s why I want a house with a garage! I would’ve like to be your neighbor or friend so you could be there to help me since you have experience!!
Hey mate, I assume you used the 630cc MWR injectors in the 2ZZ motor? if so, what Injector correction settings did you add? :) Cheers in advance
What bov? Love that flutter
I'm in a middle of a 2zz swap and I'm having issues with the Ecu harness.. where can I find the diagram?
hi nice build but can u tell me what the stock fuel pressure for the 2zz-ge can't find out what it is
Love the vids man you got a new sub. Where'd you find your rods/pistons? My spyder fell victim to the pre cat failure, so going for a built 2zz and then turboing it down the road.
Patrick Wiseman I went to monkeywrench racing for basically 95 percent of my parts. they are a bit expensive. but worth every penny. mahle Pistons and stock rods (forged from factory)
good job
are you put the cams stage 2 or stock?
and for the compression down? you use low pistons of 8,,,,? or a gasket?
please
What Toyota is that ? The topless one ?
it moves!
Tfw turbo blowoff is louder than the actual engine
My 2009 Honda stream when driving the indicator is shifting from drive to sport
I'm doing a 2ZZ turbo swap
Mahle pistons etc
I'd love to pick your brain
I'm having some pretty bad clatter on the top end..
you got rodknock my guy... or the tolerances on the valves are not right.
Did you blow your last motor or did you just want a 2ZZ swap?
John G. I blew up my built 2zz. The boost line for the wastegate broke off sending the boost to like 23 psi. The new 2zz I have I have some extra safeties for it.
C&R Garage how much time and labor is involved with swapping a 2003 matrix xrs. With a 2001 mr2. I want the 2zz from my matrix but don't really want to build it more than stock. I also have the ecu from an 01 Celica gts.
Ok so how much power was you 2zz making stock and how much is it making now with the turbo?
The Blue Corolla 192bhp stock 2zz
where would you go in Canada to buy a built 2zz?
Why does it have a 1zz intake manifold
I'm hearing a lot of turbo surge every time you let go of the gas... Bov?
Which 2zz Toyota models are best ?
The Pontiac Vibe GT and the Matrix XRS are the best because they utilize the 2 piece intake manifold good for about 7-10 more hp.
Is it possible to use the 2zz wiring harness instead of the 1zz harness ?
Yes
How much total?
where are you guys located? im in Kansas!
Nick Pahls KCMO!
C&R Garage Hell yea! Need to meet up sometime
How much would you charge to do a swap?
it depends on a lot of things lol, if you have all the pieces which included: exhaust, intake, motor mount, oil dipstick, vvl connector and ecu (2000) than around 1000
Wheres the project AW11??????
0:11 on the left 😂 but for real it’s been pushed to the back burner, we’ve got some other plans 😎
how much hp do you get from this turbo or its easy or difficult to swap turbo on 2zz?
I want to sr20det swap one
Compatible with the 05 Corolla Xrs?
Same everything homie
How do I get ahold of you
Kenji Boss what do you need?
Don't K swap, do an LS swap. j/k.
Should have just built the 1zz. :P
2zz= b18 ..... k20 better then both ...sorry just facts . im swapping a 2zz simply because its cheap
Skylin Megas I eat k20s stock for stock
2.4 vs 1.8 no duh it's better
@@vizualmrs k20 = 2.0 k24 = 2.4 🤦♂️🤦♂️